人造金刚石合成中黑色低磁金刚石的研究

 通过对合成金刚石的原材料和合成产物——石墨、Ni₇₀Mn₂₅Co₅触媒、普通人造金刚石、黑色人造金刚石、NiMnCoC熔体的磁化率测试,以及对黑色人造金刚石和普通人造金刚石破碎断面扫描电镜的对比分析,认为黑色人造金刚石形成低磁性的原因是由于合成过程中温度偏高、压力偏低,生长的金刚石质量差、裂纹多。晶体内夹杂了很多石墨与触媒包裹体,同时金刚石表面与金刚石晶体内的触媒包裹体之间形成贯穿性的裂纹。在金刚石化学提纯处理过程中,金刚石晶体内的铁磁性触媒包裹体杂质被通过裂纹进入的酸除去。因而在检测金刚石磁性时,黑色金刚石的磁性很小,呈弱磁性。     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

Unitarity and Page Curve for Evaporation of 2D AdS Black Holes

We explore the Hawking evaporation of two-dimensional anti-de Sitter (AdS2), dilatonic black hole coupled with conformal matter, and derive the Page curve for the entanglement entropy of radiation. We first work in a semiclassical approximation with backreaction. We show that the end-point of the evaporation process is AdS2 with a vanishing dilaton, i.e., a regular, singularity-free, zero-entropy state. We explicitly compute the entanglement entropies of the black hole and the radiation as functions of the horizon radius, using the conformal field theory (CFT) dual to AdS2 gravity. We use a simplified toy model, in which evaporation is described by the forming and growing of a negative mass configuration in the positive-mass black hole interior. This is similar to the “islands” proposal, recently put forward to explain the Page curve for evaporating black holes. The resulting Page curve for AdS2 black holes is in agreement with unitary evolution. The entanglement entropy of the radiation initially grows, closely following a thermal behavior, reaches a maximum at half-way of the evaporation process, and then goes down to zero, following the Bekenstein–Hawking entropy of the black hole. Consistency of our simplified model requires a non-trivial identification of the central charge of the CFT describing AdS2 gravity with the number of species of fields describing Hawking radiation.     

The use of carbon black-supported sulfuric acid to initiate the cationic polymerization of cyclic ketene acetals

Stable polymers were made by the cationically initiated 1,2-polymerization of cyclic ketene acetals employing heterogeneous, activated carbon-supported sulfuric acid catalysts. A methodology has been established for the preparation of the carbon black of different acidic strengths. By adjusting either the acid strength or the amount of carbon black used, cyclic ketene acetals with different activities can be polymerized efficiently to form stable high molecular weight polymers. This methodology will be a useful tool for polymerization, copolymerization, and studies of the relative reactivities of the cyclic ketene acetals. The polymer structures were determined by FTIR, ¹³C-NMR, and ¹H-NMR studies. © 1996 John Wiley & Sons, Inc.     

Organic electroluminescent device with aromatic amine-containing polymer as a hole transport layer (II): Poly(arylene ether sulfone)-containing tetraphenylbenzidine

Organic electroluminescent devices were fabricated using a poly(arylene ether sulfone)-containing tetraphenylbenzidine (PTPDES) and tris(8-quinolinolato)-aluminum(III) complex, Alq, as the hole transport layer and the electron-transporting emitter layer, respectively. A device structure of glass substrate/indium—tin oxide (ITO)/PTPDES/Alq/Mg : Ag was employed. Hole injection from ITO through the PTPDES layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green light with a luminance of 14,000 cd/m² was observed at a drive voltage of 14 V, indicating that the polymer possesses a high hole mobility and a high electron-blocking capability.     

ZnS作为空穴缓冲层的新型有机发光二极管

采用磁控溅射方法在ITO表面沉积了不同厚度的ZnS超薄膜作为有机发光二极管(OLEDs)的缓冲层,使典型结构(ITO/TPD/Alq3/Al)的OLEDs的发光性能得到改善。ZnS缓冲层厚度对器件性能影响的实验结果表明,当ZnS缓冲层厚度为5nm时,器件电流密度提高了近2倍,亮度提高了2倍;当ZnS缓冲层厚度为10nm时,器件发光的电流效率提高18%,器件的性能得到改善。宽禁带的ZnS缓冲层对空穴从阳极到有机功能层的注入有阻碍作用,促进器件载流子平衡,提高了器件发光效率,改善了器件性能。     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

Rotational flow of Oldroyd-B nanofluid subject to Cattaneo-Christov double diffusion theory

A nanofluid is composed of a base fluid component and nanoparticles, in which the nanoparticles are dispersed in the base fluid. The addition of nanoparticles into a base fluid can remarkably improve the thermal conductivity of the nanofluid, and such an increment of thermal conductivity can play an important role in improving the heat transfer rate of the base fluid. Further, the dynamics of non-Newtonian fluids along with nanoparticles is quite interesting with numerous industrial applications. The present predominately predictive modeling studies the flow of the viscoelastic Oldroyd-B fluid over a rotating disk in the presence of nanoparticles. A progressive amendment in the heat and concentration equations is made by exploiting the Cattaneo-Christov heat and mass flux expressions. The characteristic of the Lorentz force due to the magnetic field applied normal to the disk is studied. The Buongiorno model together with the Cattaneo-Christov theory is implemented in the Oldroyd-B nanofluid flow to investigate the heat and mass transport mechanism. This theory predicts the characteristics of the fluid thermal and solutal relaxation time on the boundary layer flow. The von K′arm′an similarity functions are utilized to convert the partial differential equations(PDEs) into ordinary differential equations(ODEs). A homotopic approach for obtaining the analytical solutions to the governing nonlinear problem is carried out. The graphical results are obtained for the velocity field, temperature, and concentration distributions. Comparisons are made for a limiting case between the numerical and analytical solutions, and the results are found in good agreement. The results reveal that the thermal and solutal relaxation time parameters diminish the temperature and concentration distributions, respectively. The axial flow decreases in the downward direction for higher values of the retardation time parameter. The impact of the thermophoresis parameter boosts the temperature distribution.     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。     

旋转状态半受限冲射流流动和换热特性研究

利用数值模拟的方法,通过改变冲击雷诺数Rej(20000-35000)、旋转数Ro(0-0．0117)等参数,分析旋转条件下半受限单孔冲击射流的流动和换热特性,讨论了旋转对冲击射流的流场结构和换热特性的影响．研究结果表明:冲击射流在离心力和哥氏力的共同作用下发生弯曲,造成冲击靶面上的冲击斑随着旋转数Ro的增加而不断偏移,显著影响了冲击的冷却效果．冲击靶面的平均Nu数随着冲击雷诺数Rej的增加而增加;当旋转数Ro增加时,冲击靶面的平均Nu数先增加,后减小,然后再增加．计算结果和试验结论基本一致．