区间上反N型函数的迭代根

讨论了区间I＝[0,1]上的所有反N型（即减－增－减型）函数的迭代根问题。     

关于Drazin逆逆序律的一个注记

本文利用矩阵间秩的关系给出Ｄｒａｚｉｎ逆逆序律成立的一个充分必要条件     

CeO2/BaMnAl11O19-α催化剂制备及甲烷催化燃烧研究

采用反相微乳液法制备了BaMAl11O19-α (M=Mn, Co, Ce)催化剂,研究了M对催化剂相组成、比表面积和甲烷催化燃烧活性的影响.Mn促进六铝酸盐的形成,Mn基催化剂比表面积虽低,甲烷燃烧活性却较高.Ce 基催化剂的热稳定性高,比表面积大幅度增加,但甲烷催化燃烧活性比Mn基催化剂低.Ce和Mn的共同作用使CeO2/BaMnAl11O19-α催化剂不仅比表面积较大,而且具有较高的甲烷燃烧活性.在100 h连续试验中,CeO2/BaMnAl11O19-α催化剂活性稳定,有望成为催化热汽轮机燃烧器的潜在催化剂之一.     

Reverse atom transfer radical polymerization of methyl methacrylate with a new catalytic system,FeCl3/isophthalic acid

A new catalytic system, FeCl₃/isophthalic acid, was successfully used in the reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) in the presence of a conventional radical initiator, 2,2′‐azo‐bis‐isobutyrontrile. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in an N,N‐dimethylformamide solvent at 90–120 °C. The polymerization was controlled up to a molecular weight of 50,000, and the polydispersity index was 1.4. Chain extension was performed to confirm the living nature of the polymer. The kinetics of the RATRP of MMA with FeCl₃/isophthalic acid as the catalyst system was investigated. The apparent activation energy was 10.47 kcal/mol. The presence of the end chloride atom on the resulting PMMA was demonstrated by ¹H NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 765–774, 2001     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

Effects of the polyamide molecular structure on the performance of reverse osmosis membranes

Thin-film composite reverse osmosis membranes of polyamides were prepared by interfacial polymerization. Various benzenediamines and poly(aminostyrene) were interfacially reacted with various acyl chlorides to prepare a skin layer of composite membranes. Among the membranes prepared from the structural isomeric monomers of benzenediamines and acyl chlorides, i.e., the same chemical composition but different in the position of functional groups on the aromatic ring, the membrane with the best salt rejection was obtained when the reacting groups forming amide are located at the same position on the aromatic ring. Membranes prepared by interfacially reacting various diamines with trimesoyl chloride revealed that the salt rejection depends on the linear chain structure of polyamides and network formed by crosslinking. Membranes obtained by interfacial polymerization of poly(aminostyrene) with trimesoyl chloride showed higher water flux but lower salt rejection than those obtained by interfacial polymerization of various benzenediamines with trimesoyl chloride. Membranes obtained here showed the typical trade-off behavior between salt rejection and water flux. However, membranes prepared by interfacially reacting trimesoyl chloride with a mixture of poly(aminostyrene) and m-phenylenediamine or a mixture of poly(aminostyrene), m-phenylenediamine, and diaminobenzoic acid showed a performance advantage over usual membranes, i.e., a large positive deviation from the usual trade-off trend. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 1821–1830, 1998     

联萘酚手性拆分方法及其用于实验室废水的检测

联萘酚是具有手性的药物中间体,其对映体的拆分和检测具有重要意义.建立一种反相液相色谱手性拆分方法,用于联萘酚对映体的拆分.考察了6种不同手性色谱柱的拆分效果,并进一步对流动相配比、柱温和流速等因素进行了优化.结果表明,CHIRALPAK?IA手性柱对联萘酚对映体有较好的拆分性能,在流动相为甲醇-1％ 乙酸(90:10,...     

氢化多孔石墨烯反渗透特性及机理分析

单层石墨烯凭借超薄的厚度和优异的力学化学防污性能,成为新一代纳滤膜材料的最佳选择之一.本文采用经典分子动力学方法,研究了氢化多孔石墨烯反渗透膜对盐水的反渗透特性.结果表明,水渗透量会随着驱动力、孔径和温度的增加而增加;而孔径大于水合半径的条件下,盐离子截留率会随驱动力和温度的增加而降低.当反渗透膜和盐水存在切向运动时,随着切向速度的增加可以有效提高盐离子截留率和减弱浓差极化现象,但也在一定程度上牺牲了水通量.通过分析水流沿渗透方向的能障分布、水分子的氢键分布和离子水合状态,解释了各参数变化对盐水在氢化多孔石墨烯中反渗透特性的影响机理.研究结果将提供基于单层多孔石墨烯反渗透特性的理论认识,并将为纳米级反渗透膜的设计提供帮助.     

酶催化反应模拟作用的研究及分析应用

生物转是化学和生物学交叉研究领域，包括生物催化剂（酶）工程和反应介质工程两大要素。一方面，开发性能优良的模拟酶，能模拟天然酶生物体内的高催化活性（酶模拟）；另一方面，介质工程可以用体外的方法模拟酶在生物体内细胞膜的微环境（膜模拟），对用体外的方法研究生物内催化信息，探讨生物体系的生命现象具有重要的意义。     

反相胶束微乳液法制备氧化钇纳米微晶

纳米结晶;反相胶束微乳液法制备氧化钇纳米微晶