Difference in Conversions Between Dimethyl Sulfide and Methanethiol in a Cold Plasma Environment

This study compared the conversion of two malodorous substances, dimethyl sulfide (CH₃SCH₃, DMS) and methanethiol (CH₃SH) in a cold plasma reactor. The DMS and CH₃SH were successfully destroyed at room temperature. DMS decomposed less than CH₃SH at the same conditions. In oxygen-free condition, CS₂ and hydrocarbons were the major products, while SO₂ and CO_x were main compounds in oxygen-rich environments. The DMS/Ar plasma yielded more hydrocarbons and less CS₂ than that of CH₃SH/Ar plasma. In the CH₃SH/O₂/Ar plasma, rapid formation of SO and CO resulted in the yields much more amounts of SO₂ and CO₂ than those in the DMS/O₂/Ar plasma; and remained only a trace of total hydrocarbons, CH₂O, CH₃OH, CS₂, and OCS. The major differences between the reaction mechanisms of DMS and CH₃SH were also proposed and discussed.     

Condensed tetrazolo-1,3,5-triazines. 4. Synthesis of salts of 5-aminotetrazolo[1,5-a]-1,3,5-triazin-7-one

2-Amino-4-azido-1,3,5-triazin-6(1H)-ones were synthesized by successive substitution of the trinitromethyl groups in 2-amino-4,6-bis(trinitromethyl)-1,3,5-triazines under the influence of azide and nitrite ions. Interaction of 2-amino-4-azido-1,3,5-triazin-6(1H)-ones with bases led to the azido-tetrazole tautomeric conversion give salts of 5-aminotetrazolo[1,5-a]-1,3,5-triazin-7-one. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1211–1219, August, 2006.     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

Improvement in enzyme activity and stability by addition of low molecular weight polyethylene glycol to sodium bis(2-ethyl-L-hexyl)sulfosuccinate/isooctane reverse micellar system

The activity and stability of Chromobacterium viscosum lipase (glycerolester hydrolase, EC 3.1.1.3)-catalyzed olive oil hydrolysis in sodium bis (2-ethyl-1-hexyl)sulfosuccinate (AOT)/isooctane reverse micelles is increased appreciably when low molecular weight polyethylene glycol (PEG 400) is added to the reverse micelles. To understand the effect of PEG 400 on the phase behavior of the reverse micellar system, the phase diagram of AOT/PEG 400/water/isooctane system was studied. The influences of relevant parameters on the catalytic activity in AOT/PEG 400 reverse micelles were investigated and compared with the results in the simple AOT reverse micelles. In the presence of PEG 400, the linear decreasing trend of the lipase activity with AOT concentration, which is observed in the simple AOT reverse micelles, disappeared. Enzyme entrapped in AOT/PEG reverse micelles was very stable, retaining>75% of its initial activity after 60 d, whereas the half-life in simple AOT reverse micelles was 38 d. The kinetics parameter maximum velocity (V _max)exhibiting the temperature dependence and the activation energy obtained by Arrhenius plot was suppressed significantly by the addition of PEG 400.     

新型反相微乳液制备纳米结构甲烷催化燃烧催化剂La0.95Ba0.05MnAl11O19-α的研究

提出一种由水, 异丙醇, 正丁醇组成的新型微乳液, 并以其为反应介质制备了甲烷高温燃烧La_0.95Ba_0.05MnAl₁₁O_19-a催化剂. 采用¹H NMR, FT-IR, 电导法及激光粒度散射法研究了新型微乳液中水的结构及相特性. 新型微乳液中水的体积分数小于一定值时, 电导率与水含量成非线性关系, k～φ曲线上存在一临界值(φ^P＝0.15). 水质子的化学位移随水含量的降低移向高场. 加入4% D₂O测定的O—D键的伸缩振动随水含量增加而向高波数方向移动. 异丙醇铝在新型微乳液中水解形成的Al(OH)₃ 胶体粒子的粒径范围为226～329 nm. 采用新型微乳液作为反应介质制备的Ba_0.05La_0.95MnAl₁₁O_19-α催化剂的粒径在30 nm, 明显小于纯水制备的样品(100 nm). BET 比表面积为65 m²/g, 比纯水制备样品高出约一倍. XRD结果显示, 1200 ℃焙烧10 h即可获得含单一β-Al₂O₃相的催化剂. Ba_0.05La_0.95MnAl₁₁O_19-α催化剂甲烷催化燃烧的T₁₀为420 ℃, 比纯水制备样品下降了90 ℃. 甲烷催化燃烧活性提高是由于含有较多Mnⁿ+纳米结构六铝酸盐的形成.     

Characterization of chromate conversion coating on AA7075‐T6 aluminum alloy

Chromate conversion coatings (CCCs) on AA7075‐T6 were characterized using scanning electron microscopy, focused ion beam sectioning and scanning transmission electron microscopy with nano‐electron dispersive spectroscopy line profiling. The thickness and composition of the CCC was different at different locations on the heterogeneous microstructure of AA7075‐T6. The coating formed on the matrix phase was much thicker than that formed on the coarse Al–Cu–Mg, Al–Fe–Cu and Mg–Si intermetallic particles. Nano‐electron dispersive spectroscopy line profiling indicated that the coating on the Al–Fe–Cu particles was similar to the CCC formed on the phase matrix, primarily a chromium oxide. However, the coatings on the Al–Cu–Mg and Mg–Si particles were mixed Al/Mg/Cr oxide and Mg oxide, respectively. The growth of CCC followed a linear‐logarithmic kinetic rate law. The observations of this study support the sol‐gel model of CCC formation. Copyright © 2004 John Wiley & Sons, Ltd.     

Induced Absorption of C60 and a Water-Soluble C60-Derivative in SiO2 Sol-Gel Matrices

Porous sol-gel glasses, either impregnated with pure C₆₀ or doped with a methanofullerene derivative, have been studied and induced absorption or reverse saturable absorption (RSA) has been observed in both types of solid materials. The samples impregnated by pure C₆₀ mainly contain well-dispersed fullerene molecules. Unlike crystalline films of C₆₀, their absorption dynamics can be well described by a 5-level model, developed for non-interacting C₆₀-molecules in solutions. Methanofullerene samples, on the other hand, show signs of micellar aggregation and therefore RSA dynamics that are influenced by solid state effects. We observe an important decrease of transmission at high fluences for both kinds of samples, a shortened singlet-state lifetime to that observed in solution, but nonetheless, a triplet yield, that cannot be considered as negligible. In the case of pure C₆₀ in a sol-gel matrix, we can explain the faster de-excitation dynamics, relative to behavior in solution, mainly by the absence of stabilizing aromatic solvents and also by the interaction of the amorphous environment with the molecules. Concerning the methanofullerene samples, the acceleration of the de-excitation dynamics can be principally attributed to solid-state effects due to the micellar aggregation.     

Methane conversion to C2 hydrocarbons in solid electrolyte membrane reactors

Solid electrolyte membrane reactors (SEMRs) have been used to both study and influence catalytic reaction rates. Methane coupling is the reaction most thoroughly and intensively studied in these membrane reactors. In the last 20 years, oxygen ion (O²⁻), proton (H⁺) and mixed (O²⁻-e⁻, H⁺-e⁻) conducting membranes have been tested in order to maximize the conversion of methane to C₂ compounds. The present review contains the fundamental operating principles of the various SEMR types and their applications in this reaction. The difficulties that should be overcome in order to promote this SEMR process to an industrial scale are discussed.