应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

光学系统光阑应用的实例

介绍了一种光学组合系统，通过构造光学系统虚拟的视场光阑实现人眼屈光度测量，它是光学系统光阑应用的生动实例.     

Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

Assignments of methanol laser lines by frequency measurements and Fourier transform spectroscopy

We have measured the frequencies of four CH₃OH far-infrared laser lines that were previously known only by wavelength measurement. Two of these lines turned out to be doublets, bringing the total number of measured lines to six. We can now confirm the assignments of five of them and definitely disprove the assignments proposed for the sixth.In particular we confirm the assignments for the four strong laser lines at 205 and 208 µm pumped by the 9-P(34) CO₂ laser line. These lines share a common upper level in the first excited CO-stretch state, and terminate in the upper and lower levels of a hybrid state with J=5. Heterodyne frequency measurements and conventional microwave spectroscopy show that both lines are split into two components approximately 3.5 MHz apart. The origin of this further splitting is interpreted as a perturbed K-splitting.Work supported by Consiglio Nazionale delle Ricerche -Italia     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

超快光电测量技术

本文综述了近年来趔快光电测量技术的新进展，其中包括扭快光电材料的特性、高速光电器件的基本原理，着重介绍了若干主要的用快光电测量技术．     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Measurement error and the Albert-Loewer problem

Modal interpretations of QM have the welcome consequence that unitarily evolved post-measurement states which superpose eigenstates of the anticipated pointer observable can represent devices registering determinate measurement outcomes. Albert and Loewer have claimed that modal interpretations cannot account for the outcomes of error-prone measurements. But Albert, Loewer, and their commentators have not always appreciated the relation of measurement error to the Albert-Loewer problem. I argue that measurement error is neither necessary nor sufficient to generate the Albert-Loewer problem, and use the Araki-Yanase theorem to show that measurements of a large class of observables, if they are error-free, are beset by the Albert-Loewer problem.     

On retroactive occurrence and twin events in quantum mechanics

Bohr's well-known claim that only a registered phenomenon is a true phenomenon is further elaborated into occurrence in the past: If ideal occurrence of an eventP ((1–P)) is a state at a timet _i makes another eventQ ((1–Q))certain at a later timet _f, and, finallyU is the evolution operator fromt _i tot _f, then, it is proved that the final collapsed stateQ(U U ⁺)Q/TrQU U ⁺, which comes about in ideal occurrence ofQ att _f,equals the initial collapsed stateU(P P/TrP)U ⁺, which evolves from the state resulting from the ideal occurrence ofP in att _i. Utilizing the latter state is called theretroactive apparent ideal occurrence (RAIO) ofP in. A number of consequences, including the general notion of twin events (the case whent _f=t _i, andU=1) is derived. It is pointed out that RAIO is relevant in second-kind quantum measurement, in Wheeler's delayed-choice experiments in second-kind (or conditional) quantum preparators.