Temperature‐Sensitive Amorphous Polyurethanes

Abstract

Shape‐memory polymers based on segmental polyurethanes (PUs) were synthesized from 1,3‐butane diol (1,3‐BD), hexamethylene diisocyanate (HDI), and 4,4′‐diphenylmethane diisocyanate (MDI), and characterized in terms of thermomechanical, dynamic mechanical, rheological, and thermal properties. It was found that soft segments (1,3‐BD and HDI) and hard segments (1,3‐BD and MDI) were well phase mixed to give a single glass transition temperature (T _g) that was easily controlled by hard segment content. With the increase in hard segment content, T _g, melt viscosity, rubbery plateau, modulus, relaxation time, and shape recovery increased, and shape fixability for repeated cycles decreased.     

Kopplung des programmierbaren Tischrechners EMG 666 mit einem Vielkanalspektrometersystem mit Anschlußbedingungen nach Standard-Interface SI 1.2.

Die Hauptaufgabengebiete der Spektrometrie gammaaktiver Nuklide in der Hauptabteilung Radioaktive Präparate des ZfK Rossendorf sind Nuklididentifizierung, Bestimmung der Radio-nuklidreinheit und Aktivitätsmessung. Die Bearbeitung erfolgt an Vielkanal-Spektrometersystemen (VKA) in Verbindung mit Ge(Li)-Halbleiterdetektoren. Im Zusammenhang mit einem Probenwechslersystem sind in Zukunft routinemäßig große Probenserien abzuarbeiten. Damit wird die für die Datenerfassung verwendete Peripherie der bestimmende Faktor für die Zeit, die zwischen zwei Messungen vergeht. Für die Ausgabe von 2K-Spektren auf Lochband benätigt man Zeiten, die etwa in der Großenordnung der Meßzeit liegen.     

随机介质的相干背散射与局域化研究

研究了不同尺度参数和粒子浓度下的ZnO随机介质相干背散射强度的分布规律,采用时域有限差分法分析了不同浓度随机介质的光场能量空间分布,预测了随机激光器阈值的高低。结果表明:同一折射率的介质随着介质尺寸的增大,相干背散射的带宽变窄,局域化参量kl值相应增大,使得局域化程度呈较大幅度减弱趋势;并且随着介质浓度的增加,相干背散射的带宽变宽,局域化程度增强,阈值降低。相干背散射有着光子局域化的先期特征,现在已成为研究光子局域化出现与否的基本判断依据,对研究光子局域化以及随机激光器具有重要意义。     

利用分形法表征光学元件中高频相位畸变

针对神光Ⅲ主机装置使用的光学元件,基于分形理论,分析中高频相位畸变的统计分布特征,指出其满足分数布朗随机场,并利用结构函数法对分形维数进行计算,统计结果显示,大口径钕玻璃片的分形维数在2.34~2.43之间。利用局部稳态的随机中点位移法,提出一种新的表征光学元件相位的方法,将分形维数作为参数,可衡量中高频相位畸变,对高功率激光光学元件的评价有参考意义。     

Fuzzy overlapping community detection based on local random walk and multidimensional scaling

A fuzzy overlapping community is an important kind of overlapping community in which each node belongs to each community to different extents. It exists in many real networks but how to identify a fuzzy overlapping community is still a challenging task. In this work, the concept of local random walk and a new distance metric are introduced. Based on the new distance measurement, the dissimilarity index between each node of a network is calculated firstly. Then in order to keep the original node distance as much as possible, the network structure is mapped into low-dimensional space by the multidimensional scaling (MDS). Finally, the fuzzy c$c$-means clustering is employed to find fuzzy communities in a network. The experimental results show that the proposed algorithm is effective and efficient to identify the fuzzy overlapping communities in both artificial networks and real-world networks.     

On the non-equivalence of two standard random walks

We focus on two models of nearest-neighbour random walks on d$d$-dimensional regular hyper-cubic lattices that are usually assumed to be identical—the discrete-time Polya walk, in which the walker steps at each integer moment of time, and the Montroll–Weiss continuous-time random walk in which the time intervals between successive steps are independent, exponentially and identically distributed random variables with mean 1$1$. We show that while for symmetric random walks both models indeed lead to identical behaviour in the long time limit, when there is an external bias they lead to markedly different behaviour.     

A Review of Online Real-Time Process Analyses of Melt-State Polymer Using the Near-Infrared Spectroscopy and Chemometrics

Abstract

This review describes the online process monitoring of the melt-state polymer by near-infrared (NIR) spectroscopy and chemometrics. The spectra of linear low-density polyethylene (LLDPE), random polypropylene (RPP), block polypropylene (BPP), and ethylene-vinylacetate (EVA) copolymer in melt states measured by an online monitoring system with a Fourier transform near-infrared spectrometer are discussed. The calibration models for the density of LLDPE, the content of ethylene copolymers in RPP and BPP, and vinylacetate concentration (VA) in EVA copolymers using partial least squares regression are reported. The continuous monitoring of the LLDPE density at the real plant is described as an example of online monitoring using NIR spectroscopy and chemometrics. For the precise prediction of VA in EVA, a combination method using regression and discrimination was inducted. Three compensation methods for the effect of the temperature change in the RPP and BPP samples are shown. Conventional calibration transfer methods are introduced, and a practical calibration transfer method using two samples and its performance are reported using BPP and RPP spectra. Moreover, the possibility of a calibration correction method using one sample for the realization of long-term traceability is indicated by the example of the relocation.     

忆阻逾渗导电模型中的初态影响

逾渗网格模型是当前忆阻器件机理分析研究领域的热点之一, 但现有模型缺乏对初态设定的讨论. 本文对逾渗网格模型进行了简化, 并基于此, 通过电压激励步进的方式, 研究了不同初态对单极性忆阻开关元件中逾渗导电通道形成的影响, 分析了形成通道的动态过程以及相应的物理意义, 验证了忆阻开关元件高低阻态的阻值实际表现为高斯分布而非理想双值稳态; 而不同初态条件下, 忆阻开关元件导电通道的形状存在着不同的"树形"结构, 进而影响着其阻值的分布. 研究成果有助于进一步揭示忆阻器尚未明确的导电机理, 为今后对具体不同类型的忆阻元件的初态分析提供指导性作用. 关键词： 忆阻器 开关元件 逾渗模型 初态分析