A visual strip sensor for determination of iron

A visual strip has been developed for sensing iron in different aqueous samples like natural water and fruit juices. The sensor has been synthesized by UV-radiation induced graft polymerization of acrylamide monomer in microporous poly(propylene) base. For physical immobilization of iron selective reagent, the in situ polymerization of acrylamide has been carried out in the presence of 1,10-phenanthroline. The loaded strip on interaction with Fe(II) in aqueous solution turned into orange red color and the intensity of the color was found to be directly proportional to the amount of Fe(II) in the aqueous sample. The minimal sensor response with naked eye was found for 50 ng mL⁻¹ of Fe in 15 min of interaction. However, as low as 20 ng mL⁻¹ Fe could be quantified using a spectrophotometer. The detection limit calculated using the 3s/S criteria, where ‘s’ is the standard deviation of the absorbance of blank reagent loaded strip and ‘S’ is the slope of the linear calibration plot, was 1.0 ng mL⁻¹. The strip was applied to measure Fe in a variety of samples such as ground water and fruit juices.     

A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol)

A molecularly imprinted copolymer, poly(o-phenylenediamine-co-o-aminophenol) (PoPDoAP), was prepared as a new ascorbic acid (AA) sensor. The copolymer was synthesized by incorporation of AA as template molecules during the electrochemical copolymerization of o-phenylenediamine and o-aminophenol, and complementary sites were formed after the copolymer was electrochemically reduced in ammonium aqueous solution. The molecularly imprinted copolymer sensor exhibited a high sensitivity and selectivity toward AA. Differential pulse voltammograms (DPVs) showed a linear concentration range of AA from 0.1 to 10 mM, and the detection limit was calculated to be 36.4 μM. Compared to conventional polyaniline-based AA sensors, the analytical performance of the imprinted copolymer sensor was improved due to the broadened usable pH range of PoPDoAP (from pH 1.0 to pH 8.0). The sensor also exhibited a good reproducibility and stability. And it has been successfully applied in the determination of AA in real samples, including vitamin C tablet and orange juices, with satisfactory results.     

Construction and Validation of New Electrochemical Carbon Nanotubes Sensors for Determination of Acebutolol Hydrochloride in Pharmaceuticals and Biological Fluids

A simple, rapid and a highly selective method for direct electrochemical determination of acebutolol hydrochloride (AC) was developed. The developed method was based on the construction of three types of sensors conventional polymer (I), carbon paste (II) and modified carbon nanotubes (MCNTs) carbon paste (III). The fabricated sensors depend mainly on the incorporation of acebutolol hydrochloride with phosphotungstic acid (PTA) forming ion exchange acebutolol‐phosphotungstate (AC‐PT). The performance characteristics of the proposed sensors were studied. The sensors exhibited Nernstian responses (55.6 ± 0.5, 57.14 ± 0.2 and 58.6 ± 0.4 mV mol L^?1) at 25 °C over drug concentration ranges (1.0 × 10^?6‐1.0 × 10^?2, 1.0 × 10^?7‐1.0 × 10^?2 and 5.0 × 10^?8‐1.0 × 10^?2 mol L^?1 with lower detection limits of (5.0 × 10^?7, 5.0 × 10^?8 and 2.5 × 10^?8 mol L^?1 for sensors (I), (II) and (III), respectively. The influence of common and possible interfering species, pharmaceutical additives and some related pharmacological action drugs was investigated using separate solution method and no interference was found. The stability indicating using forced degradation of acebutolol hydrochloride was studied. The standard addition method was used for determination of the investigated drug in its pharmaceutical dosage forms and biological fluids. The results were validated and statistically analysed and compared with those from previously reported methods.     

用于褪黑素检测的电化学生物传感器研究进展

褪黑素是人体松果体分泌的一种重要的神经递质,近年来其在控制昼夜节律和提供免疫抗炎特性等生理调节作用方面备受关注。因此,发展可靠、快速检测体内和体外样本中褪黑素浓度的方法,对于探索褪黑素的临床应用和生物学特性具有重要的意义。本文对褪黑素及其传统检测方法进行简要介绍,重点阐述了近几年报道的用于生物样本和药物样本中褪黑素定量检测的电化学传感器,并对褪黑素传感器的未来发展方向进行展望。     

Borazine as a sensor for fluoride ion: a computational and experimental study

The computational and experimental studies have revealed that even simple molecule like borazine can act as a sensor for fluoride ions. This study further reported the various binding modes of analytes using quantum chemical calculations and the nature of such interactions have been examined using electron density surface analysis. Total charge transfer analysis (q_CT) correlates well with the binding affinities of analytes with the borazine receptor.     

Fluorescence sensing of Cu and Hg by a dipyrene ligand involving an excimer-switch off mechanism

A novel dipyrene ligand 1 has been designed which shows intramolecular excimer formation in solution. Its specific interaction with Cu²⁺ or Hg²⁺ leads to the disruption of the excimer and results in a fluorescence-mediated sensing of these ions in a mixed organic-aqueous solution. Apart from steady-state studies, time-resolved fluorescence measurements also reveal that excimer-switch off caused by metal ion coordination leads to the selective detection of these ions.     

可视化阵列传感器技术鉴别不同香型白酒

决定白酒香型的物质种类繁多,成分复杂.采用可视化阵列传感器技术对中国白酒五大香型的代表酒样进行检测,在可视化区分的基础上采用分层聚类分析、主成分分析等统计分析方法,对检测结果进行分析.不同香型的白酒在聚类分析中可以正确归类,利用主成分分析得到的前3个主成分所代表的白酒75.8%的信息量就可以将不同香型白酒完全区分开,表...     

基于纳米SnO2材料的二维纳米催化发光传感器研制及其测定甲基叔丁基醚的应用

以碳纳米管(CNT)为模板,采用液相沉积法可控合成了SnO2-CNT复合纳米材料、SnO2纳米棒两种形貌的SnO2纳米材料,研究了它们对甲醇、MTBE催化发光的影响.通过考察两种不同形貌SnO2纳米材料的结构、比表面积与其催化发光的关系,建立了一种二维纳米催化发光传感器,并测定了MTBE产品的纯度和其中的甲醇含量,甲醇...     

The superhydrophobicity of polymer surfaces: Recent developments

Superhydrophobicity is the extreme water repellence of highly textured surfaces. The field of superhydrophobicity research has reached a stage where huge numbers of candidate treatments have been proposed and jumps have been made in theoretically describing them. There now seems to be a move to more practical concerns and to considering the demands of individual applications instead of more general cases. With these developments, polymeric surfaces with their huge variety of properties have come to the fore and are fast becoming the material of choice for designing, developing, and producing superhydrophobic surfaces. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1203–1217, 2011     

Highly enantioselective fluorescent recognition of amino acid derivatives by unsymmetrical salan sensors

Novel unsymmetrical salan fluorescent sensors 2a and 2b have been designed and synthesized. The chiral recognition of N-Boc-protected amino acids by 2a and 2b has been investigated. Sensor 2a possesses higher sensitivity and enantioselectivity than sensor 2b does. Job analysis and nonlinear regression results show that 2a can form a 1:1 stoichiometric complex with a N-Boc-protected amino acid. The obtained response selectivities and the association constants indicate that 2a is a highly enantioselective and sensitive fluorescent sensor toward N-Boc-protected amino acids.