采用曲率传感器测量热透镜焦距

分析了用光栅型波前曲率传感器测量热透镜焦距的基本原理,针对高功率固体激光器的工作特点,结合实验现象推导了在热透镜效应较强时热透镜焦距变化的计算公式。对半导体二极管(LD)侧面泵浦的百W级Nd:YAG激光棒在泵浦电流为15~25 A时的热透镜焦距值进行了测量,讨论了可能存在的误差。实验现象和理论分析一致,测量的热透镜焦距值与理论值符合得较好。     

无线传感器网络多跳路由协议研究

目的：无线传感器网络发展迅速,但传感器的高能耗问题成为制约其发展的主要瓶颈,高效节能的路由协议设计成为研究热点。方法：针对目前无线传感器网络常用的LEACH路由协议存在的簇首能耗过分集中、簇首分布不均衡问题,提出了改进的路由协议EEACRA,在总结、分析LEACH路由协议现有问题的基础上,给出了EEACRA路由协议的簇首选取门限值、簇首位置调整算法和基于能量代价最小的簇间多跳路由算法的实现方法,同时给出了具体的实现EEACRA协议的工作流程和关键算法。在MATLAB环境下对LEACH路由协议和EEACRA路由协议进行了仿真,对比了不同能耗降低措施对网络能耗降低的贡献。结果：仿真结果表明EEACRA路由协议的网络稳定期较LEACH路由协议有较大的改善。结论：证明了改进的路由协议EEACRA可以有效地提高网络的稳定期。     

XH-1装置电感储能系统的电路模拟

针对XH-1装置电感储能系统,建立了电爆炸断路开关基于开关电阻倍增比与比能关系的电路模型,给出了与电感储能系统耦合时,利用PSPICE模拟计算得到的开关上的电流电压波形和负载上的电压波形,分析了负载阻抗参数对输出脉冲的影响。     

Metal-oxide-semiconductor field effect transistor using ‘oxidizedμc-Si/ultrathin oxide’ gate structure

The metal-oxide-semiconductor (MOS) field effect transistor (FET) using ‘oxidized μ c-Si/ultrathin oxide’ gate structure was studied. It was found that this structure shows negative differential resistance behavior, which can be explained by the Coulomb blockade effect of trapped carriers and immediate tunneling into and tunneling out with gate bias variation. The requirements for the device with this structure showing negative differential resistance behavior are based on very weak resistive coupling between floating gate and channel. They are the thinness of the tunnel oxide film, the thickness ratio of the upper oxidized film and the tunnel oxide, and the channel threshold voltage. MOSFET with this gate structure is proposed as a new negative differential resistance device.     

A Novel Acoustic Emission Fiber Optic Sensor Based on a Single Mode Optical Fiber Coupler

Ａｓｗｅｋｎｏｗ ,ａｓｉｎｇｌｅｍｏｄｅｆｉｂｅｒｃｏｕｐｌｅｒｉｓａｓｉｍｐｌｅｂｕｔｖｅｒｙｉｍｐｏｒｔａｎｔｆｉｂｅｒｏｐｔｉｃｄｅｖｉｃｅ ,ｗｈｉｃｈｃａｎｂｅｕｓｅｄｉｎｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｓｅｎｓｏｒｓ.Ｕｓｉｎｇｓｉｎｇｌｅｍｏｄｅｏｐｔｉｃａｌｆｉｂｅｒｄｅｖｉｃｅｓ,ｗｅｃａｎｆａｂｒｉｃａｔｅｓｅｖｅｒａｌａｃｏｕｓｔｉｃ ｏｐｔｉｃｄｅｖｉｃｅｓ ,ｓｕｃｈａｓｆｒｅｑｕｅｎｃｙｓｈｉｆｔｅｒｓ ,ｍｏｄｕｌａｔｏｒｓａｎｄｔｕｎａｂｌｅｆｉｌｔｅｒｓ .Ｓｅｖｅｒａｌ…     

Position magnifying sensor

This paper describes the application of multiple beam shearing interferometry to a position magnifying sensor. A multiple beam shearing interferometer (MBSI) with a shear plate wedged in the vertical direction produces sharp multiple beam fringes. When the lateral displacement of a point source (which gives rise to the input beam of the MBSI) or its image occurs in the horizontal direction, these fringes move vertically in a magnified manner. This characteristic was used in a position magnifying sensor to detect the displacement of a point image. The advantages of the sensor include a large displacement magnification (more than a hundred times) and a large working distance.     

Study on the microstructure and wear resistance of the composite coatings fabricated on Ti-6Al-4V under different processing conditions

Composite coatings mainly containing titanium carbides and borides were produced by laser surface alloying of Ti-6Al-4V with graphite and boron mixed powders. The test results show that the coatings have higher hardness (1600-1700 HV_0.1) and are more resistant to wear than the as-received sample. Laser scanning speed and the content of alloying elements (weight ratio of graphite to boron) have an effect on both the microstructure and the wear resistance of the coatings. TEM results show that strip titanium carbides and borides grow alternately and thus restrain the formation of coarse needle-like TiB and dendritic TiC crystals produced by laser alloying of titanium alloys with boron and graphite separately.     

Photophysics of Calix[4]biscrown-Based Ditopic Receptors of Caesium Containing One or Two Dioxocoumarin Fluorophores

The ditopic receptors Calix-COU1 and Calix-COU2 consist of a calix[4]biscrown containing one or two dioxycoumarin fluorophores, respectively, inserted into the crown. They can form 1:1 and 2:1 (metal:ligand) complexes with caesium ions. The photophysical properties of the 1:1 complexes can be explained by (i) cation tunneling through the tube-shaped cavity (composed of the four phenyl rings) of the calix[4]biscrown, (ii) photodisruption of the interaction between the bound cation and the oxygen atoms belonging to both the coumarin moiety and the crown, (iii) photoinduced motions of the cation.     

Crystal structure of Ni(II) complex and fluorescence properties of Zn(II) complex with the Schiff base derived from diethenetriamine and PMBP

The Schiff base, H₂L, was derived from 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) and diethenetriamine. The crystal structure of [NiL(C₂H₅OH)]·H₂O obtained from ethanol solution was determined by X-ray diffraction analysis. The coordination geometry of Ni(II) ion is a distorted octahedron with three oxygen atoms and three nitrogen atoms. Under the excitation of ultraviolet light, strong fluorescence of solid Zn(II) complex was observed. In addition, the fluorescence enhancement was obtained in the presence of Zn²⁺ in THF solution of the ligand, indicating that H₂L may be a potential fluorescent sensor for Zn²⁺.     

Highly Selective Optical Detection of Fe3+ Ions in Aqueous Solution Using Label‐Free Silicon Nanocrystals

High brightness amine‐terminated silicon nanocrystals (Si NCs) have been utilized in a simple and rapid assay for the highly selective and sensitive detection of Fe³⁺ via quenching of their strong blue luminescence, without the need for analyte‐specific labeling groups. Sensitive detection of Fe³⁺ is successfully demonstrated, with a linear relationship observed between luminescence quenching and Fe³⁺ concentration from 5 × 10^?6 to 900 × 10^?6m and a limit of detection of 1.3 × 10^?6m . The Si NCs show excellent selectivity toward Fe³⁺ ions, with no quenching of the luminescence signal induced by the presence of Fe²⁺ ions, allowing for solution phase discrimination between the ionic species in different charge states.