Effect of the ZnNi y Mn2– y O4 (0 ≤ y ≤ 1) spinel composition on electrochemical lithium insertion

The electrochemical insertion of lithium in the spinel-type manganite with the formula ZnNi _y Mn_{2– y} O₄ has been studied. The galvanostatic discharge curves show that the best performance is obtained for y = 0.25, where a tetragonal to cubic structural transformation occurs. The thermodynamics and kinetics of the process of insertion of the lithium into the tetragonal spinel Li _x ZnNi_0.25Mn_1.75O₄ (x = 0.05–1.3) have been studied. The molar thermodynamic quantities, such as enthalpy, entropy and free energy determined by EMF-T measurements, varied with the lithium concentration in the oxide structure, and a major variation was observed around x = 0.8. The chemical diffusion coefficient of lithium in these spinels was also determined. Structural analysis, degree of oxidation and magnetic susceptibility measurements were carried out for the lithiated oxides in order to obtain the cationic distribution as a function of x. It has been possible to demonstrate that, upon lithium insertion, Mn⁴⁺ ions on B sites are reduced to Mn³⁺ and then to Mn²⁺. A cooperative Jahn-Teller effect is present in these spinel manganese-nickel oxides. Received: 4 February 1997 / Accepted: 11 April 1997     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Reactivity of molybdenum and rhenium hydroxo-carbonyl complexes toward organic electrophiles

The hydroxo compounds [Re(OH)(CO)(3)(N-N)] (N-N=bipy, 2 a; Me(2)-bipy, 2 b) were prepared in a biphasic H(2)O/CH(2)Cl(2) medium by reaction of [Re(OTf)(CO)(3)(N-N)] with KOH. In contrast, when anhydrous CH(2)Cl(2) was used, the binuclear hydroxo-bridged compound [[Re(CO)(3)(bipy)](2)(mu-OH)]OTf (3-OTf) was obtained. Compound [Re(OH)(CO)(3)(Me(2)-bipy)] (2 b) reacted with phenyl acetate or vinyl acetate to afford [Re(OAc)(CO)(3)(Me(2)-bipy)] (4) and phenol or acetaldehyde, respectively. The reactions of [Mo(OH)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1), 2 a, and 2 b toward several unsaturated organic electrophiles were studied. The reaction of 1 with (p-tolyl)isocyanate afforded an adduct of N,N'-di(p-tolyl)urea and the carbonato-bridged compound [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(mu-eta(1)(O),eta(1)(O)-CO(3))] (5). In contrast, the reaction of 2 a with phenylisocyanate afforded [Re(OC(O)NHPh)(CO)(3)(bipy)] (6); this results from formal PhNCO insertion into the O-H bond. On the other hand, compounds [Mo[SC(O)NH(p-tolyl)](eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (7), [Re[SC(O)NH(p-tolyl)](CO)(3)(Me(2)-bipy)] (8 a), and [Re[SC(O)NHEt](CO)(3)(Me(2)-bipy)] (8 b) were obtained by reaction of 1 or 2 b with the corresponding alkyl or aryl isothiocyanates. In those cases, RNCS was inserted into the M-O bond. The reactions of 1, 2 a, and 2 b with dimethylacetylenedicarboxylate (DMAD) gave the complexes [Mo[C(OH)-C(CO(2)Me)C(CO(2)Me)-O](eta(3)-C(3)H(4)-Me-2)(CO)(phen)] (9) and [Re[C(OH)C(CO(2)Me)C(CO(2)Me)O](CO)(2)(N-N)] (N-N=bipy, 10 a; Me(2)-bipy, 10 b). The molecules of these compounds contain five-membered metallacycles that are the result of coupling between the hydroxo ligand, DMAD, and one of the CO ligands. The new compounds were characterized by a combination of IR and NMR spectroscopy, and for [[Re(CO)(3)(bipy)(2)(mu-OH)]BF(4) (3-BF(4)), 4, 5, 6, 7, 8 b, 9, and 10 b, also by means of single-crystal X-ray diffraction.     

Sodium “stuffed” Ba2−xSrxFe4O8 ferrites: new cationic conductors

Sodium insertion in the tetrahedral layer structure of the ferrites Ba_2−xSr_xFe₄O₈ was performed by solid state reaction at 1220 K in air. Superstoichiometric oxides with the actual formula (Ba_2−xSr_x)_1−y/4Na_yFe₄O₈—y0.56; 0.60Ba/Sr1.67—were characterized by X-ray and neutron powder diffraction. The hexagonal unit-cell volume shows an increasing dependence on the sodium insertion when the Ba/Sr ratio reaches the largest values. The marked expansion of the c parameter is the likely signature of the location of the inserted sodium cations within the interlayer space. One-half of the sodium cations partly sits on the Sr(Ba) sites in octahedral coordination and the other half occupies extra octahedral and tetrahedral sites. ac conductivity measurements point to a cationic conductivity whose thermally activated regime—E_a 0.7 eV—evidenced from 570 K, is unsensitive to the sodium content. The bottleneck of the 2D sodium mobility regards the crossing of the oxygen triangular faces shared by the different polyhedra within the interlayer space.     

A novel synthesis of organic diselenapolysulfides

A family of organic polychalcogenides with a common structure of RSeS_xSeR (with x=1, 2, 3 and R=CH₃, Ph, PhCH₂, O₂NC₆H₄CH₂) as well as cyclic 5,5-dimethyl-1,2-dithia-3,7-diselenacycloheptane were synthesized in good yield and high purity from the reaction of Ph₃CS_xCl with corresponding diselenides in chloroform at room temperature. Mechanistic aspects of the insertion involving the formation of an intermediate (RSeS_xCPh₃) are discussed.     

N‐Heterocyclic Silylenes in Boron Chemistry: Facile Formation of Silylboranes and Silaborinines

Reaction of a N‐heterocyclic silylene (NHSi) with PhBX₂ (X=Cl, Br) readily afforded six‐membered silaborinines through an insertion/ring expansion sequence. Increasing the sterics of the borane from phenyl to duryl enabled the selective generation and isolation of the highly colored silylborane intermediates. Theoretical studies on the mechanism and energetics of the silaborinine formation were fully consistent with the experimental observations.     

One-Pot Palladium-Catalyzed Ligand- and Metal-Oxidant-Free Aerobic Oxidative Isocyanide Insertion Leading to 2-Amino-substituted-4(3H)-quinazolinones

An efficient, ligand- and metal-oxidant-free, one-pot, cascade aerobic oxidative, palladium-catalyzed, multicomponent reaction has been developed through isocyanide insertion of less active secondary amide and aromatic amine, which leads to 2-amino-substituted-4(3H)-quinazolinones. This approach proves to be one of the simplest methods for the synthesis of this class of valuable bioactive heterocyclic scaffolds.     

Concise Synthesis of (±)-Clopidogrel via Carboxylation of Benzylamine with CO2

A concise and efficient synthesis of (±)-clopidogrel, an antithrombotic agent, is achieved by inserting CO₂ at the benzylic position as the key reaction without using any toxic transition metals. The overall yield of the synthetic process is 38% and the salient features include operationally simple process chemistry and fewer steps.