A Computational Study of CIONO2H+: Structure and Vibrations

Two protonated forms of chlorine nitrate, HClONO⁺ ₂ and ClONO₂H⁺, are treated ab initio by the Hartree-Fock and the second order Møller-Plesset perturbation approach with the standard 6–31G* basis set. Both minimum energy structures are planar (C ₃ symmetry) and their structural, energy, and vibrational parameters are reported. The computations conclude that the proton attacks the chlorine nitrate at its central, not end, oxygen atom. The protonation causes a considerable elongation of the central ON bond which becomes most probable place of cleavage. The dissociation should yield the neutral HOCl and NO⁺ ₂. These quantum-chemical findings well agree with the previous experimental indications.

     

5-(Perfluorooctylthio)acetamidofluorescein (5-FOAF) as a convenient tag for inspecting the surface coverage of fluorinated coatings

Fluorinated compounds are commonly used for anti-stick coating but it is difficult to inspect the coverage of the coating without expensive instruments. Herein, we demonstrated that the 5-(perfluorooctylthio)acetamidofluorescein (5-FOAF) probe can be synthesized in one step and used as a testing reagent to inspect the fluorinated coating on silica- or metal-based surfaces. 5-FOAF is composed of a perfluoroalkyl domain, which has high specific affinity towards fluorinated compounds, and a fluorophore domain, which exhibits fluorescence emission visible by naked eyes. Thus, 5-FOAF will retain on the surface coated with fluorinated compounds but not on the un-coated surface and the emitted fluorescence from the retained tags serves as a semi-quantitative measure of the fluorine coverage across the surface. For this study, silica-based or metal-based surfaces were activated by silane chemistry and then coated with fluorinated compounds. The coating procedure was judiciously optimized to achieve a homogeneous coating. 5-FOAF probe was synthesized in-house and shown to retain on the fluorinated surface 2-5 times stronger than the bare surface. Moreover, by studying the retention on a non-fluoro hydrophobic substrate made of polydimethylsiloxane, the affinity of 5-FOAF with the fluorinated coating was confirmed to be specific and distinguishable from nonspecific hydrophobic interaction. In conclusion, we synthesized a novel chemical, 5-FOAF, and demonstrated its usefulness as a simple testing reagent for fluorinated coatings.     

Single image non-uniformity correction using compressive sensing

A non-uniformity correction (NUC) method for an infrared focal plane array imaging system was proposed. The algorithm, based on compressive sensing (CS) of single image, overcame the disadvantages of “ghost artifacts” and bulk calculating costs in traditional NUC algorithms. A point-sampling matrix was designed to validate the measurements of CS on the time domain. The measurements were corrected using the midway infrared equalization algorithm, and the missing pixels were solved with the regularized orthogonal matching pursuit algorithm. Experimental results showed that the proposed method can reconstruct the entire image with only 25% pixels. A small difference was found between the correction results using 100% pixels and the reconstruction results using 40% pixels. Evaluation of the proposed method on the basis of the root-mean-square error, peak signal-to-noise ratio, and roughness index (ρ) proved the method to be robust and highly applicable.     

Improvements for ground-based remote sensing of atmospheric aerosol properties by additional polarimetric measurements

We discuss the improvements in the aerosol properties characterization resulting from the additional multi-wavelength polarization measurements measured by a new CIMEL polarized sun/sky-photometer, CE318-DP. In order to process direct-sun, sky and polarization measurements in a wide spectral range (340–1640 nm), we developed new calibration methods and strategies, e.g. using the Langley plot method to calibrate both direct-sun irradiance and sky radiance, as well as combining laboratory facilities with a vicarious method to calibrate the polarized sky measurements. For studying the impact of new polarimetric measurements on the retrievals of aerosol properties, we have processed an extensive record of field measurements using an updated Dubovik and King retrieval algorithm [Dubovik O, Sinyuk A, Lapyonok T, Holben BN, Mishchenko MI, et al. Application of spheroid models to account for aerosol particle nonsphericity in remote sensing of desert dust. J Geophys Res 2006;111:D11208.]. A preliminary analysis shows that adding polarization in the inversion can reduce possible errors (notably for about 30% of our field cases) in the fine mode size distribution, real part of refractive index and particle shape parameter retrievals, especially for small particles.     

Light‐Activated Sensitive Probes for Amine Detection

Our new, simple, and accurate colorimetric method is based on diarylethenes (DAEs) for the rapid detection of a wide range of primary and secondary amines. The probes consist of aldehyde‐ or ketone‐substituted diarylethenes, which undergo an amine‐induced decoloration reaction, selectively to give the ring‐closed isomer. Thus, these probes can be activated at the desired moment by light irradiation, with a sensitivity that allows the detection of amines at concentrations as low as 10⁻⁶ m in solution. In addition, the practical immobilization of DAEs on paper makes it possible to detect biogenic amines, such as cadaverine, in the gas phase above a threshold of 12 ppbv within 30 seconds.     

Anion exchange in trimethyl‐ and triphenyltin complexes with chromogenic ligands: solution equilibria and colorimetric anion sensing

A series of organotin(IV) compounds R₃Sn(A) where R = Me or Ph and A is a chromogenic nitrophenolate ligand were prepared and studied as possible colorimetric sensors for anions (F⁻, Cl⁻, Br⁻, AcO⁻, H₂PO₄⁻). Equilibrium constants for a complete set of reactions between R₃Sn(A) with A = 2‐amino‐4‐nitrophenolate (ANP) or 4‐nitrophenolate and anions (X⁻) involving formation of complexes R₃Sn(A)(X)⁻ and substitution products R₃Sn(X) and R₃Sn(X)₂⁻ were determined by UV‐vis and ¹H NMR titrations in MeCN and DMSO. The binding selectivity was AcO⁻ > F⁻ > H₂PO₄⁻ > Cl⁻ ≫ Br⁻ in both solvents and both for R = Me and Ph with higher affinity for R = Ph. Compounds with A = ANP were found to have the optimum properties as anion sensors allowing optical detection of F⁻, AcO⁻ and H₂PO₄⁻ anions in the 5–100 µM range by appearance of an intense absorption band of free ANP resulting from its substitution with the analyte. Selectivity and affinity of anion interactions with R₃Sn(ANP) are similar to those for thiourea receptors, but the organotin receptor produces a much larger naked eye detected optical signal, operates equally well in nonpolar and polar solvents and tolerates the presence of up to 20% vol. of water in DMSO. Copyright © 2011 John Wiley & Sons, Ltd.     

基于腔辅助相互作用的远距离信息传递

提出了一种基于腔辅助相互作用的远距离信息传递的方案.在该方案中,通过让一束相干光和一个囚禁在腔里面的原子进行相互作用,可以使相干光产生一个可控的相位偏移.用这种腔辅助相互作用完成了原子态和光场态之间信息的相互转移.最后我们演示了远距离信息传递方案,该方案在当前实验条件下是可行的,并且在理想条件下,成功的概率几乎为1.     

Analysis of refractometric fiber optic state-of-charge (SOC) monitoring sensor for lead acid battery

In situ monitoring of the state of charge (SOC) of lead acid battery is important to understand the residual electrical energy. Usage of battery reduces the charge content of the active electrolyte which in turn changes its refractive index. This paper reports refractometric fiber optic sensor developed for on-line monitoring of SOC. The SOC is monitored during discharging phases of the battery using the developed fiber optic sensor probe along with terminal voltage, temperature and depth of discharge using a LABVIEW based data acquisition system. The paper gives the working principle, design and construction details, results and calibration of the fiber optic sensor (FOS) probe. The in situ monitoring capability of the developed FOS is demonstrated in comparison with the contemporary off-line methods of specific gravity and terminal voltage measurements.     

First measurements of the HCFC-142b trend from atmospheric chemistry experiment (ACE) solar occultation spectra

The first measurement of the HCFC-142b (CH₃CClF₂) trend near the tropopause has been derived from volume mixing ratio (VMR) measurements at northern and southern hemisphere mid-latitudes for the 2004–2008 time period from spaceborne solar occultation observations recorded at 0.02 cm⁻¹ resolution with the ACE (atmospheric chemistry experiment) Fourier transform spectrometer. The HCFC-142b molecule is currently the third most abundant HCFC (hydrochlorofluorocarbon) in the atmosphere and ACE measurements over this time span show a continuous rise in its volume mixing ratio. Monthly average measurements at northern and southern hemisphere mid-latitudes have similar increase rates that are consistent with surface trend measurements for a similar time span. A mean northern hemisphere profile for the time span shows a near constant VMR at 8–20 km altitude range, consistent on average for the same time span with in situ results. The nearly constant vertical VMR profile also agrees with model predictions of a long lifetime in the lower atmosphere.     

Controlled remote implementation of partially unknown quantum operation

A protocol for controlled remote implementation of a partially unknown operation on an arbitrary quantum state is proposed. In this protocol, a task can be performed using a GHZ state shared among three distant parties: Alice, Bob and the controller Charlie. This protocol is also generalized to the multi-party control system based on sharing an N-qubit GHZ state. Supported by the Natural Science Youth Teacher Foundation of Xuzhou Institute of Technology, China (Grant No. XKY2007317)