Stepwise Diagnostic Product Ions Filtering Strategy for Rapid Discovery of Diterpenoids in Scutellaria barbata Based on UHPLC-Q-Exactive-Orbitrap-MS

Diterpenoids are considered the major bioactive components in Scutellaria barbata to treat cancer and inflammation, but few comprehensive profiling studies of diterpenoids have been reported. Herein, a stepwise diagnostic product ions (DPIs) filtering strategy for efficient and targeted profiling of diterpenoids in Scutellaria barbata was developed using UHPLC-Q-Exactive-Orbitrap-MS. After UHPLC-HRMS/MS analysis of six diterpenoid reference standards, fragmentation behaviors of these references were studied to provide DPIs. Then, stepwise DPIs filtering aimed to reduce the potential interferences of matrix ions and achieve more chromatographic peaks was conducted to rapidly screen the diterpenoids. The results demonstrated that stepwise DPIs were capable of simplifying the workload in data post-processing and the effective acquisition of low abundance compounds. Subsequently, DPIs and MS/MS fragment patterns were adopted to identify the targeted diterpenoids. As a result, 381 diterpenoids were unambiguously or tentatively identified, while 141 of them with completely new molecular weights were potential new diterpenoids for Scutellaria barbata. These results demonstrate that the developed stepwise DPIs filtering method could be employed as an efficient, reliable, and valuable strategy to screen and identify the diterpenoid profile in Scutellaria barbata. This might accelerate and simplify target constituent profiling from traditional Chinese medicine (TCM) extracts.     

High Hydrostatic Pressure to Increase the Biosynthesis and Extraction of Phenolic Compounds in Food: A Review

Phenolic compounds from fruits and vegetables have shown antioxidant, anticancer, anti-inflammatory, among other beneficial properties for human health. All these benefits have motivated multiple studies about preserving, extracting, and even increasing the concentration of these compounds in foods. A diverse group of vegetable products treated with High Hydrostatic Pressure (HHP) at different pressure and time have shown higher phenolic content than their untreated counterparts. The increments have been associated with an improvement in their extraction from cellular tissues and even with the activation of the biosynthetic pathway for their production. The application of HHP from 500 to 600 MPa, has been shown to cause cell wall disruption facilitating the release of phenolic compounds from cell compartments. HPP treatments ranging from 15 to 100 MPa during 10–20 min at room temperature have produced changes in phenolic biosynthesis with increments up to 155%. This review analyzes the use of HHP as a method to increase the phenolic content in vegetable systems. Phenolic content changes are associated with either an immediate stress response, with a consequent improvement in their extraction from cellular tissues, or a late stress response that activates the biosynthetic pathways of phenolics in plants.     

Therapeutic Potential of Highly Selective A3 Adenosine Receptor Ligands in the Central and Peripheral Nervous System

Ligands of the G_i protein-coupled adenosine A₃ receptor (A₃R) are receiving increasing interest as attractive therapeutic tools for the treatment of a number of pathological conditions of the central and peripheral nervous systems (CNS and PNS, respectively). Their safe pharmacological profiles emerging from clinical trials on different pathologies (e.g., rheumatoid arthritis, psoriasis and fatty liver diseases) confer a realistic translational potential to these compounds, thus encouraging the investigation of highly selective agonists and antagonists of A₃R. The present review summarizes information on the effect of latest-generation A₃R ligands, not yet available in commerce, obtained by using different in vitro and in vivo models of various PNS- or CNS-related disorders. This review places particular focus on brain ischemia insults and colitis, where the prototypical A₃R agonist, Cl-IB-MECA, and antagonist, MRS1523, have been used in research studies as reference compounds to explore the effects of latest-generation ligands on this receptor. The advantages and weaknesses of these compounds in terms of therapeutic potential are discussed.     

Covalent Organic Frameworks for Chemical and Biological Sensing

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with polygonal porosity and highly ordered structures. The most prominent feature of the COFs is their excellent crystallinity and highly ordered modifiable one-dimensional pores. Since the first report of them in 2005, COFs with various structures were successfully synthesized and their applications in a wide range of fields including gas storage, pollution removal, catalysis, and optoelectronics explored. In the meantime, COFs also exhibited good performance in chemical and biological sensing, because their highly ordered modifiable pores allowed the selective adsorption of the analytes, and the interaction between the analytes and the COFs’ skeletons may lead to a detectable change in the optical or electrical properties of the COFs. In this review, we firstly demonstrate the basic principles of COFs-based chemical and biological sensing, then briefly summarize the applications of COFs in sensing some substances of practical value, including some gases, ions, organic compounds, and biomolecules. Finally, we discuss the trends and the challenges of COFs-based chemical and biological sensing.     

Indole-based distinctive chemosensors for ‘naked-eye’ detection of CN and HSO4−, associated with hydrogen-bonded complex and their DFT study

Colorimetric detection of anions (HSO₄^? and CN^?) was achieved via analyte triggered colour changing of the dipodal and tripodal sensors in CH₃CN–H₂O (1:1). The sensors exhibited very sharp visual colour changes and fluorescence quenching–enhancing effect upon addition of the HSO₄^? and CN^?. The large downfield shift of the NH proton signals in ¹H-NMR complexation studies and quantum chemical DFT calculations proved the formation of hydrogen-bonded complexes where no proton transfer mechanism was found.     

Dependence of Colloidal Forces Between Bitumen and Silica on the Chain Lengths of Ammonium Surfactants

Effects of ammonium surfactants with different hydrocarbon chain lengths (C8, C12, C16, and C18) on the colloidal forces between bitumen and silica were studied by atomic force microscopy. The results showed that the chain length of the ammonium surfactants had a significant impact on both the long-range interaction and adhesion forces. With the addition of surfactants with relative short chains of C8 and C12 in the solutions, the long-range repulsive force decreased or even became strong attractive force, while it became repulsive again in solutions of surfactants with long chains of C16 and C18. It was further observed that addition of Ca²⁺ in various surfactants solutions would either depress or enhance the colloidal interactions based on the surfactant chain lengths. It was believed that variation of the interaction behaviors resulted from the mono-layer or bilayer adsorption of various surfactant molecules on the negatively charged surfaces of bitumen and silica, which affected the surface wettability and the surface charge characteristics and then greatly changed the colloidal interactions. The findings indicated that, to have a high bitumen recovery and good froth quality, the surfactant type and concentration of the di-valent metal ions in the oil sand processing slurry must be well considered.     

Study on the electroreduction process of oxygen to superoxide ion by using acetylene black powder microelectrode

In this paper, the powder microelectrode technique was employed in studying the voltametric response of the O₂/₂⁻ couple, which demonstrated a nearly reversible redox process at an acetylene black powder microelectrode in N,N-dimethylformamide (DMF). A well-developed steady state current plateau for the electrochemical reduction of oxygen was obtained in this system. The electron transfer number (n) and heterogeneous electron transfer rate constant k _s were measured by steady-state voltametric response, and the results were 1.08, 3.4 × 10⁻³ cm s⁻¹, respectively. Additionally, the scavenging activity of O₂⁻ with biological antioxidant (ascorbic acid) was evaluated by cyclic voltammetry; IC₅₀ came to 5 × 10⁻⁴ mol/l. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1040–1044. The text was submitted by the authors in English.     

Measurement of dissolved oxygen during red wines tank aging with chips and micro-oxygenation

Nowadays, micro-oxygenation is a very important technique used in aging wines in order to improve their characteristics. The techniques of wine tank aging imply the use of small doses of oxygen and the addition of wood pieces of oak to the wine. Considering the low dissolved oxygen (DO) levels used by micro-oxygenation technique it is necessary to choose the appropriate measurement principle to apply the precise oxygen dosage in wine at any time, in order to assure its correct assimilation. This knowledge will allow the oenologist to control and run the wine aging correctly.This work is a thorough revision of DO measurement main technologies applied to oenology. It describes the strengths and weaknesses of each of them, and draws a comparison of their workings in wine measurement. Both, the traditional systems by electrochemical probes, and the newest photoluminescence-based probes have been used. These probes adapted to red wines ageing study are then compared.This paper also details the first results of the dissolved oxygen content evolution in red wines during a traditional and alternative tank aging. Samples have been treated by three different ageing systems: oak barrels, stainless-steel tanks with small oak wood pieces (chips) and with bigger oak pieces (staves) with low micro-oxygenation levels. French and American oak barrels manufactured by the same cooperage have been used.     

Equilibria effects in the dynamic ion-exchange separation of metal ions

Summary Equilibria occurring during the dynamic ion exchange separation of metal ions were examined, and their effect on the chromatography of the metal ions was evaluated. Bonded reversed-phase silica, pure organic reversed phase, and silica columns were used to differentiate between the role of silica and the reverse phase. The results show that system peaks had the most important influence on the applicability of dynamic exchangers to quantitative metal ion determinations. The response of system peaks to sample composition (pH, ionic strength, matrix effects) was complicated and could not be predicted easily. Equilibria effects that can cause analytical errors were identified and recommendations for elimination of such errors are given.Dedicated to Professor S. R. Lipsky on the occasion of his 60th birthday.     

钽硫原子簇的形成及激光裂解的初步研究

报导用激光直接溅射的方法产生了大量的钽硫原子团簇离子Ta_nS_m~+(n≤9, m≤30),并用串级飞行时间质谱仪研究了所产生团簇离子的组成及紫外激光裂解规律。实验发现, 最稳定的团簇正离子往往具有Ta_nS_(2n+7)~+(n=1,2,…9)的组成, 相应的负离子具有, Ta_nS_(2n+3)~-(n=1,2,…9)的组成。各种团簇正离子的激光裂解的主要通道是连续的S_2消除过程, 且对于n=3,4,5的团簇, 主要光解产物还有Ta_3S_4~+或Ta_4S_6~+离子。据此推测出Ta_nS_m~+团簇离子的可能结构为在Ta原子周围有6个左右的S原子配位。Ta原子之间不存在直接的化学键,而较大团簇可能是以Ta_3S_4或Ta_4S_6为核心的结构。