Selective detection of Fe(III) ions in aqueous solution with a 1,8-diacridylnaphthalene-derived fluorosensor

The syn-isomer of 1,8-bis(4,4′-diisopropyl-9,9′-diacridyl)naphthalene, 1, has been prepared by two consecutive Pd(PPh₃)₄-catalyzed Stille cross-coupling steps. This highly congested sensor undergoes Fe(III)-selective fluorescence quenching in water/acetonitrile even in the presence of excess of other metal ions.     

The detection of oxygen in magneto-optical layers with SIMS

The detection of oxygen in magneto-optical layers is of fundamental importance for the characterization of the stability of RE-TM material. The magnetic properties are directly influenced by oxide formation. Oxygen depth profiles are carried out by using the SIMS technique. A comparison with magnetic measurements showed a clear conformity. We were able to study the oxidation behaviour of various layers at room temperature and at higher values up to 250° C for several hours. It could be shown that aluminum is a successful material for the protection of RE-films against oxidation. The difficulties of translating SIMS counting rates into concentration values were overcome by using EPMA. Specially prepared reference samples were measured by this technique and could then be used as standard samples for SIMS.     

Proton magnetic relaxation study of water orientation around I− and Li+

Proton relaxation time measurements are performed for 6m aqueous solutions of⁷LiI and⁶LiI in D₂O containing small amounts of H₂O. The measurements are done at low temperatures and yield maxima of the relaxation rate plotted against 1/T. From the maxima of the relaxation rates, proteon-I^– and proton-Li⁺ distances in the first coordination sphere of the ions are determined, and from the knowledge of the ion-water oxygen distance it is shown that for iodide a somewhat broadened H-bonded configuration is valid and that for Li⁺ the electric dipole orientation deviates from the radial direction. In order to test the reliability of the method a proton-¹²⁷I interaction study is also performed in KI solution in glycerol. The I-H distance obtained is in satisfactory agreement with that found in the aqueous system.     

Oxidation of mandelic acid derivatives catalysed by Bi(0)/O2 systems: mechanistic considerations

Mandelic acid and some aryl substituted derivatives were oxidised under molecular oxygen and a catalytic amount of Bi(0). The corresponding aldehydes and/or the carboxylic acids were obtained selectively depending on the nature of the substituent. Aldehydes and α-keto acids were oxidised under the same Bi(0)/O₂ system and α-keto acids were proposed as intermediates in the formation of benzoic acid derivatives.     

Mass spectrometer-wall probe diagnostic of Ar discharges containing SF6 and/or O2: Reactive ions in etching plasmas

Positive and negative ions of Ar/SF₆ and Ar/SF₆/O₂ plasmas (etching plasmas) and of Ar/O₂ plasmas (cleaning plasmas) in Pyrex tubes have been investigated using a mass spectrometer-wall probe diagnostic technique. The measurement of negative ions proved to be a very sensitive method for the detection of wall material. In etching plasmas with small admixtures of SF₆, oxygen was found as the only representative of wall material. At larger amounts of SF₆, silicon could be detected. In cleaning plasmas with small admixtures of O₂ applied to a previously etched Pyrex surface, fluorine was found, indicating the reversal of fluoridation by oxygenation.     

Tropaeolin OO as a Chemical Sensor for a Trace Amount of Pd(II) Ions Determination

The selective determination of metals in waste solutions is a very important aspect of the industry and environmental protection. Knowledge of the contents and composition of the waste can contribute to design an efficient process separation and recovery of valuable metals. The problematic issue is primarily the correct determination of metals with similar properties such as palladium and platinum. Thus this paper focuses on the development of a selective method that enables Pd(II) determination in the presence of Pt(IV) ions using the azo-dye tropaeolin OO (TR). For this purpose, the process of the metalorganic complex formation and Pd(II) ions determination were studied by using UV–Vis spectrophotometry under different conditions: solvents (water and B-R buffer), pH (2.09–6.09), temperature (20–60 °C), anions and cations concentrations. The formed metalorganic complex between Pd and tropaeolin OO allows for distinguishing Pd(II) ions from both platinum complexes, i.e. Pt(II), Pt(IV). Moreover, the proposed method can be applied to solutions containing both chloride and chlorate ions. The obtained characteristic spectrum with two maxima allows the determination of palladium even in the presence of other cations (Na, K, Mg, Zn, Co, Ni, Al) and changed concentrations of Pt(IV) ions. Furthermore, the developed spectrophotometric method for the Pd(II) ions determination using tropaeolin OO is characterized by high selectivity towards palladium ions.     

A New Supramolecular Tetraruthenated Cobalt (II) Porphyrazine Displaying Outstanding Electrocatalytical Performance in Oxygen Evolution Reaction

A new supramolecular electrocatalyst for Oxygen Evolution Reaction (OER) was synthesized from a central multibridging cobalt tetrapyridylporphyrazine (CoTPyPz) species by attaching four [Ru(bpy)₂Cl]⁺ groups. Both CoTPyPz and the tetraruthenated cobalt porphyrazine species, TRuCoTPyPz, form very homogenous molecular films just by dropcasting their methanol solutions onto GCE electrodes. Such films exhibited low overpotentials for O₂ evolution, e.g., 560 e 340 mV, respectively, displaying high stability, typically exceeding 15 h. The kinetic parameters obtained from the Tafel plots showed that the peripheral complexes are very important for the electrocatalytic activity. Hyperspectral Raman images taken along the electrochemical process demonstrated that the cobalt center is the primary active catalyst site, but its performance is enhanced by the ruthenium complexes, which act as electron-donating groups, in the supramolecular system.     

Biological Risk Assessment of Three Dental Composite Materials following Gas Plasma Exposure

Gas plasma is an approved technology that generates a plethora of reactive oxygen species, which are actively applied for chronic wound healing. Its particular antimicrobial action has spurred interest in other medical fields, such as periodontitis in dentistry. Recent work has indicated the possibility of performing gas plasma-mediated biofilm removal on teeth. Teeth frequently contain restoration materials for filling cavities, e.g., resin-based composites. However, it is unknown if such materials are altered upon gas plasma exposure. To this end, we generated a new in-house workflow for three commonly used resin-based composites following gas plasma treatment and incubated the material with human HaCaT keratinocytes in vitro. Cytotoxicity was investigated by metabolic activity analysis, flow cytometry, and quantitative high-content fluorescence imaging. The inflammatory consequences were assessed using quantitative analysis of 13 different chemokines and cytokines in the culture supernatants. Hydrogen peroxide served as the control condition. A modest but significant cytotoxic effect was observed in the metabolic activity and viability after plasma treatment for all three composites. This was only partially treatment time-dependent and the composites alone affected the cells to some extent, as evident by differential secretion profiles of VEGF, for example. Gas plasma composite modification markedly elevated the secretion of IL6, IL8, IL18, and CCL2, with the latter showing the highest correlation with treatment time (Pearson’s r > 0.95). Cell culture media incubated with gas plasma-treated composite chips and added to cells thereafter could not replicate the effects, pointing to the potential that surface modifications elicited the findings. In conclusion, our data suggest that gas plasma treatment modifies composite material surfaces to a certain extent, leading to measurable but overall modest biological effects.     

预脉冲对相对论磁控管工作性能的影响分析

在阐述预脉冲产生的基础上,分析了预脉冲带来的一系列影响,包括工和电压波形变化,提前生成等离子体,以及预脉冲阶段放大竞争模式等,这些影响与相对论磁控管起振工作频率相联系,从而直接造成了相对论磁控管的基本性能参数,如脉宽、工作频率及输出功率等变化。结合具体实验,对比了有、无预脉冲条件下相对论磁控管工作性能的差异,对预脉冲的影响因素与相对论磁控管性能之间的联系进行了详细的分析。