H2,CO,CH4多元爆炸性混合气体支链爆炸阻尼效应

对多元爆炸性混合气体爆炸的阻尼效应,进行了比较系统的研究,实验表明：“惰性气体”N2,CO2与水蒸汽对多元混合气体支链爆炸具有一定的抑制作用;甲烷与石油液化气对含H2易爆混合气体支链爆炸具有明显的阻尼效应．这对指导支链燃烧与支链爆炸的实践,关于工业尾气与废气的安全回收,有关爆炸性混合气体的置换技术的改进,以及工业与矿井混合气体爆炸事故的预防,具有重要的现实意义与理论价值．     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

Approximate Atomic Green Functions

In atomic and many-particle physics, Green functions often occur as propagators to formally represent the (integration over the) complete spectrum of the underlying Hamiltonian. However, while these functions are very crucial to describing many second- and higher-order perturbation processes, they have hardly been considered and classified for complex atoms. Here, we show how relativistic (many-electron) Green functions can be approximated and systematically improved for few- and many-electron atoms and ions. The representation of these functions is based on classes of virtual excitations, or so-called excitation schemes, with regard to given bound-state reference configurations, and by applying a multi-configuration Dirac-Hartree-Fock expansion of all atomic states involved. A first implementation of these approximate Green functions has been realized in the framework of Jac, the Jena Atomic Calculator, and will facilitate the study of various multi-photon and/or multiple electron (emission) processes.     

电磁轴承系统的刚度阻尼特性分析

分析了电磁轴承系统的刚度阻尼特性与系统结构参数及其控制器频响特性之间的关系。给出了系统控制电流的相位对系统稳定性和刚度阻尼特性的影响。提出了电磁轴承系统的复阻尼概念，以及部分刚度阻尼特性指标的实际意义和计算方法。     

具有分支电路的可控压电阻尼减振技术

对近10年来国内外关于具有分支电路的可控压电阻尼减振技术研究的进展进行了较为详细的评述和讨论.文中首先说明了具有分支电路的压电阻尼减振技术的基本原理和基本形式,然后较为全面的评述不同形式基本分支电路压电阻尼系统的基本特点和研究进展,在讨论了以基本分支电路压电阻尼系统为基础的各种具有可控特性的分支电路压电阻尼系统(包括半主动的和主动-被动杂交的分支电路压电阻尼系统)的研究与发展之后,说明了这种技术在实际工程中的应用,最后建议了今后应深入研究的问题.      

On damping coefficient due to phase transformation

The damping coefficient of capillary waves due to the evaporation-condensation process at the interface of the two phases of a fluid is evaluated. To highlight the mechanism of the effect of heat and mass transfer across the interface between regions of liquid and vapor, potential flow of incompressible fluids are assumed. Thus other mechanisms of damping are neglected. To fascilitate the analysis, the method of multiple-scale is employed in the analysis, even though the problem is linear.     

非稳态弹流润滑状态下滚动体-滚道摩擦副的动力特性研究

针对滚动体-滚道摩擦副,建立了点接触非稳态弹流润滑数学模型,利用FFT技术和半解析算法数值求解了接触体在自由振动过程中油膜压力和膜厚的变化,同时结合有阻尼系统的自由振动模型,给出了预测点接触摩擦副动力特性的方法,在较宽的载荷和速度范围内分析了接触副的等效刚度系数和阻尼系数的变化.结果表明：根据接触副的实际工作载荷和速度所确定的无量纲自然频率来进行非稳态弹流的计算所得到的膜厚结果更接近实验值;在接触体的振动过程中油膜的压力和厚度在平衡位置附近上下波动,且由于润滑油膜的作用接触体的振动幅值逐渐减小;刚度系数随载荷参数的增加而增加,随速度参数的增加而减小,而阻尼系数的变化规律较复杂,在不同的载荷和速度范围内呈现出不同的变化趋势.     

Dynamic modeling and simulation of deploying process for space solar power satellite receiver

To reveal some dynamic properties of the deploying process for the solar power satellite via an arbitrarily large phased array (SPS-ALPHA) solar receiver, the symplectic Runge-Kuttamethod is used to simulate the simplified model with the consideration of the Rayleigh damping effect. The system containing the Rayleigh damping can be separated and transformed into the equivalent nondamping system formally to insure the application condition of the symplectic Runge-Kutta method©First, the Lagrange equation with the Rayleigh damping governing the motion of the system is derived via the variational principle. Then, with some reasonable assumptions on the relations among the damping, mass, and stiffness matrices, the Rayleigh damping system is equivalently converted into the nondamping system formally, so that the symplectic Runge-Kutta method can be used to simulate the deploying process for the solar receiver. Finally, some numerical results of the symplectic Runge-Kutta method for the dynamic properties of the solar receiver are reported. The numerical results show that the proposed simplified model is valid for the deploying process for the SPS-ALPHA solar receiver, and the symplectic Runge-Kutta method can preserve the displacement constraints of the system well with excellent long-time numerical stability.     

分块法研究圆柱绕流升阻力

 使用新的分块耦合方法，分别对单圆柱和串列双圆柱绕流进行了数值 模拟. 对于单圆柱绕流，低$Re$下计算所得到的定常涡尺寸与实验非常接近. 对于 串列双圆柱绕流，研究分析了改变双圆柱中心间距对上下游圆柱的升阻力系数和脉动频率所 产生的影响，计算结果与实验非常吻合，为进一步研究涡致振动提供了依据.     

复合纤维增强混凝土阻尼测试装置开发与试验研究

纤维与聚合物的掺入可以明显改善混凝土材料的阻尼性能。本文首先给出了正弦交变激励下粘弹性材料三点弯曲梁阻尼特性关系,其次首次自主开发了大尺寸材料的阻尼性能测试装置,然后利用开发的装置在频率(0.5~2.0Hz)条件下测定了6种不同配比复合纤维增强阻尼混凝土的损耗因子与储存模量,最后对纤维的阻尼增强机理进行了初步探讨。试验结果表明:复合纤维增强阻尼混凝土与素混凝土相比,提高了混凝土的损耗因子80%~200%。主要原因是聚合物分子在外力作用下的内耗增加了普通混凝土的阻尼能力,而纤维的阻尼增强机理在于纤维的掺入增加了纤维与水泥基材的界面摩擦力。