Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

In this paper,large-sized sapphire (230×210 mm,27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching,scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101～8.0×102 cm-2,in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally,the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.     

杜氏盐藻多糖的高效体积排阻色谱的保留特性及其分析方法的研究

通过对从杜氏盐藻中提取出的不同多糖级分在高效体积排阻色谱柱(Waters Ultrahydragel Linear,7.8 mm i.d.×300 mm,2根串联)上的保留特性的考察及其分离分析条件的优化,建立了高效体积排阻色谱分析盐藻多糖平均相对分子质量及其分布的方法。结果表明:流动相中盐的种类及其浓度、pH值对3种酸性多糖级分(特别是硫酸化多糖级分PD4a)的保留行为有显著影响;在柱温为45 ℃,流速为0.9 mL/min条件下,使用0.1 mol/L的NaAc水溶液作流动相基本上能消除非特异性吸附作用及分子间缔合等因素的干扰,使各多糖级分基本以非缔合状态按立体排除机制保留和分离。在优化的色谱条件下,测得的盐藻多糖5个级分的重均相对分子质量(Mw)分别为1548000,33000,67000,424000,10000;测得的硫酸化多糖级分PD4a的Mw和峰面积的相对标准偏差分别为1.7%和 0.88%(n=5)。     

液相色谱-电喷雾质谱法分析脂肪醇聚氧乙烯醚硫酸钠

采用电喷雾质谱(ESI/MS)技术建立了脂肪醇聚氧乙烯醚硫酸钠(AES)的烷基碳链分布、乙氧基分布及平均EO数、平均相对分子质量的测定方法;采用液相色谱-电喷雾质谱(LC-ESI/MS)测定了AES中的游离十二烷基硫酸钠(SDS)的含量。将本方法应用于实际样品的测定,并与核磁共振法测得的平均EO数进行比较,二者的测定结果相当吻合,从而验证了本法的可靠性。     

Development and characterization of a magnetic bead-quantum dot nanoparticles based assay capable of Escherichia coli O157:H7 quantification

The development and characterization of a magnetic bead (MB)-quantum dot (QD) nanoparticles based assay capable of quantifying pathogenic bacteria is presented here. The MB-QD assay operates by having a capturing probe DNA selectively linked to the signaling probe DNA via the target genomic DNA (gDNA) during DNA hybridization. The signaling probe DNA is labeled with fluorescent QD₅₆₅ which serves as a reporter. The capturing probe DNA is conjugated simultaneously to a MB and another QD₆₅₅, which serve as a carrier and an internal standard, respectively. Successfully captured target gDNA is separated using a magnetic field and is quantified via a spectrofluorometer. The use of QDs (i.e., QD₅₆₅/QD₆₅₅) as both a fluorescence label and an internal standard increased the sensitivity of the assay. The passivation effect and the molar ratio between QD and DNA were optimized. The MB-QD assay demonstrated a detection limit of 890 zeptomolar (i.e., 10⁻²¹ mol L⁻¹) concentration for the linear single stranded DNA (ssDNA). It also demonstrated a detection limit of 87 gene copies for double stranded DNA (dsDNA) eaeA gene extracted from pure Escherichia coli (E. coli) O157:H7 culture. Its corresponding dynamic range, sensitivity, and selectivity were also presented. Finally, the bacterial gDNA of E. coli O157:H7 was used to highlight the MB-QD assay's ability to detect below the minimum infective dose (i.e., 100 organisms) of E. coli O157:H7 in water environment.     

氢火焰离子化检测器校正因子的理论计算

根据FID检测器工作原理，提出一种相对质量校正因子的计算公式。由该公式出发可以推导出相对摩尔响应值（RMR）与化合物碳数的线性关系式和有效碳数的近似计算方法，并赋予原计算方法中的参数以明确的含意，解决了参数之间的矛盾。新方法的计算值同文献数据吻合良好。     

超高效凝胶色谱法测定聚乙二醇衍生物的分子量及其分布

采用超高效聚合物色谱(APC)技术,以单甲氧基聚乙二醇丙醛(m PEG_p ALD)为代表,测定了聚乙二醇衍生物的相对分子质量及其分布和杂质含量,优选了色谱柱和流动相,考察了样品质量浓度变化以及溶解时间等对测定结果的影响。优化后3根超高效凝胶色谱柱串联,在柱温40℃,流动相95%甲醇,流速0.5m L/min,示差折光检测条件下,对m PEG_p ALD的分子量及其分布进行测定,同时得到杂质的相对含量。结果测得m PEG_p ALD主成分的重均分子量(Mw)为19 444,分布指数(D)为1.01;杂质1的Mw为38 703,D为1.01,含量为1.31%;杂质2的Mw为61 036,D为1.00,含量为0.70%。与常规凝胶渗透色谱(GPC)相比,该方法分辨率高,分析速度快,能快速测定m PEG_p ALD的相对分子量及其分布,并能得到其纯度和杂质含量,为其工艺研发、质量控制提供了科学的依据,同时也可用于其它PEG衍生物的相对分子量及其分布和纯度的测定。     

基于相对即时密度的泡沫铝材料力学性能研究

通过对圆柱形泡沫铝试件进行静态压缩和冲击实验，考察了泡沫铝的初始密度、孔径和尺寸等因素对材料应力应变关系的影响，研究了基于相对即时密度的泡沫铝材料的塑性行为。实验所用泡沫铝试件包含四种尺寸，三种孔径及多种初始密度。实验结果表明，初始密度对泡沫铝的应力应变关系有着显著的影响，而其他因素，如孔径、试件尺寸等的影响较小。基于实验结果，提出了一种新的泡沫铝材料力学性能的描述方法，即用材料的相对即时密度与应力的关系来描述泡沫铝材料的塑性行为。该关系适用于静态和动态加载情况，只是两种情况下的参数不同。基于该方法，发现泡沫铝的塑性行为可以用单一的应力一相对即时密度关系描述，这一关系甚至不依赖于材料的初始密度，这将使泡沫铝材料塑性行为的描述大大简化。     

单桩竖向动力阻抗计算模型研究

运用土动力学和结构动力学原理,同时考虑桩周土的弱化效应和桩-土界面的相对滑移效应,利用数理方程方法分别求解单桩与桩周近场土域及远场土域的振动方程,建立了竖向荷载作用下单桩动力阻抗函数的简化计算方法,提出了一种改进的非线性动力Winkler模型,确定了模型中各物理元件的参数,进而通过对比分析验证了计算模型的合理性,从而为桩-土-上部结构耦合系统的非线性分析奠定了基础。     

Estimating Non-Gaussianity of a Quantum State by Measuring Orthogonal Quadratures

We derive the lower bounds for a non-Gaussianity measure based on quantum relative entropy (QRE). Our approach draws on the observation that the QRE-based non-Gaussianity measure of a single-mode quantum state is lower bounded by a function of the negentropies for quadrature distributions with maximum and minimum variances. We demonstrate that the lower bound can outperform the previously proposed bound by the negentropy of a quadrature distribution. Furthermore, we extend our method to establish lower bounds for the QRE-based non-Gaussianity measure of a multimode quantum state that can be measured by homodyne detection, with or without leveraging a Gaussian unitary operation. Finally, we explore how our lower bound finds application in non-Gaussian entanglement detection.     

区间数的排序方法研究

指出献^[3-5]所定义的用于区间数排序的可能度存在的不足,分别给出了刻画区间数大小比较的相对优势度的定义和模糊互补矩阵排序的一种新方法。在此基础上,给出了区间数的一种排序方法。