Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Efficient Synthesis of Nitroflavones by Cyclodehydrogenation of 2′-Hydroxychalcones and by the Baker-Venkataraman Method

Summary. Several nitroflavone derivatives were synthesized by cyclodehydrogenation of 2′-hydroxychalcones and by the Baker-Venkataraman approach, starting from 2′-hydroxyacetophenones and benzoic acid derivatives. Nitroflavones synthesised by the first synthetic approach were obtained in better global yields than those obtained by the later method. The structures of all new compounds were elucidated by microanalyses, 1D and 2D NMR, IR, and mass spectroscopic measurements.     

Electrocatalytic activity of ordered intermetallic PtSb for methanol electro-oxidation

Ordered intermetallic PtSb had been synthesized by arc-melted and then sintering treatment. The electro-oxidation of liquid methanol on PtSb was investigated at room temperature by cyclic voltammetry and chronoamperometry. The results are compared to those at a polycrystalline platinum electrode surface. It was found that PtSb intermetallic was catalytically more active than pure platinum according to the onset potential and current density. X-ray diffraction (XRD) and XPS technologies had been used to investigate the crystal structure and electron effect.     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.     

1,3-diallyl-5-[ω-(diphenylphosphino)alkyl] isocyanurates in reactions of complex formation with palladium(ii) dichloride

The reactions of phosphine derivatives of diallyl isocyanurates with palladium(ii) dichloride lead to the formation of complexes, whose structure, composition, and stability depend on the length of the methylene chain between the isocyanurate and diphenylphosphine fragments in the ligand. 1,3-Diallyl-5-[5′-(diphenylphosphino)pentyl and 10′-(diphenyl-phosphino)decyl] isocyanurates with PdCl₂ form monomeric L₂PdCl₂ trans-complexes in which P atoms of the ligands participate in coordination with the metal. 1,3-Diallyl-5-[2′-(diphenylphosphino)ethyl] isocyanurate with PdCl₂ forms a dimeric (LPdCl₂)₂ complex, which decomposes in a solution to the monomer including solvent molecule into the coordination sphere of the metal. The reactions of 1,3-diallyl-5-[4′-(diphenylphosphino)butyl] isocyanurate and 1,3-diallyl-5-[6′-(diphenylphosphino)hexyl] isocyanurate with PdCl₂ give monomeric chelate LPdCl₂ complexes in which one of the allyl groups of the isocyanurate cycle participates in coordination with the central ion along with the phosphorus atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1859–1865, September, 1998.     

成像光谱技术中机上实时数据压缩方法研究

根据成像光谱仪的特点用一系列串行的一维压缩实现二维图像压缩.提出了在机上对原始数据从光谱方向进行实时压缩的“二真值线性预测方法”.该法可做到压缩/复原后光谱特征信息不丢失.实验表明,对大多数光谱数据在1%的重建精度下,至少可获得2:1的压缩比.从总体而言,压缩后原始数据率可降低3～4倍.文中还对压缩数据的编码和误差进行了讨论.     

XPS investigations of ink‐jet printed paper

Different ink‐jet printed paper materials were investigated using X‐ray photoelectron spectroscopy (XPS) yielding the elemental composition of the near‐surface region of the papers. We found significant differences with respect to the detected elements and their atomic concentrations in the different inks studied here. Two different groups of inks could be identified by means of a lower ratio of the O and C atomic concentrations and lower concentrations in specific trace elements like Mg, Na and Si. High‐resolution spectra of C 1s and O 1s core levels allowed a detailed determination of the chemical state of the respective elements. On the basis of a detailed deconvolution of these XPS signals, significant differences between all the investigated ink‐jet printed papers were found, thereby allowing their discrimination. The applicability of the measurements and, more generally, the XPS technique for forensic investigations of paper are discussed. Copyright © 2007 John Wiley & Sons, Ltd.