新型锂离子电池正极材料LiMPO_4(M=Fe,Mn)的谱学和电化学研究

采用固相反应与液相反应,合成了新型锂离子电池正极材料LiMPO4(M=Fe,Mn)。粉末X光衍射表明材料均为纯相。对材料的显微拉曼光谱和红外光谱进行了研究和指认。循环伏安研究表明,含锂磷酸盐是一类有潜力的锂离子电池正极材料。     

纳米碳管的电化学贮锂性能

用透射电镜、高分辨透射电镜、X射线衍射和拉曼光谱表征了用催化热解法制备的纳米碳管的结构,研究了纳米碳管的电化学嵌脱锂性能。以纳米级铁粉为催化剂热解乙炔气得到的纳米碳管石墨化程度较低,结构中存在褶皱的石墨层、乱层石墨和微孔等缺陷,具有国交高的贮锂容量,初始容量为640mAh/g,但循环稳定性较差。而以纳米级氧化铁粉为催化剂热解乙烯得到的纳米碳管结构比较规则,循环稳定性较好,但贮锂容量较低,初始容量为282mAh/g。讨论了纳米碳管的结构对其温度特性和不同电流密度下的充放电容易的影响。     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity.Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-acoess and hazardous.In addition.optical fiber dosimeters are immune to electrical and radio-frequency interference.In this paper,a novel remote optical fiber radiation dosimeter is described.The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL.The measuring range of the dosimeter is from 0.1 to 100 Gy.The equipment is relatively simple and small in size,and has low power consumption.This device is suitable for measuring the space radiation dose and also can be used in high radiation dose condition and other dangerous radiation occasions.     

一种可用于离面位移测量的光路的优化设计

为了实现对复杂三维物体表面轮廓、小空间内物体的纵向位移或振动等测量，有必要研制高分辨力、非接触的光学检测系统。由于激光多普勒技术具有动态响应快、线性度好、非接触、测量精度高等特点而优先被用于复杂三维物体离面位移的测量。但是物体表面散射光的多普勒信号非常微弱，因此解决信号的强度、信噪比则是实现测量的关键。研究了激光多普勒技术及散射光相位的无规变化的统计规律，设计出一种空间分辨力很高的参考光路，将它用于固体离面位移测量效果很好，其相对误差为0．3％。     

分子束外延生长赝配高电子迁移率超高速微结构功能材料里深中心识别

应用深能级瞬态谱(DLTS)技术研究分子束外延(MBE)生长的highelectronmobilitytransistors(HEMT)和Pseudomorphichighelectronmobilitytransistors(PHEMT)结构深中心行为.样品的DLTS谱表明,在HEMT和PHEMT结构的nAlGaAs层里存在着较大浓度(1015-1017cm-3)和俘获截面(10-16cm2)的近禁带中部电子陷阱.它们可能与AlGaAs层的氧含量有关.同时还观察到PHEMT结构晶格不匹配的AlGaAsInGaAsGaAs系统在AlGaAs里产生的应力引起DX中心(与硅有关)能级位置的有序移动.其移动量可作为应力大小的一个判据,表明DLTS技术是定性识别此应力的可靠和简便的工具. 关键词： 分子束外延生长 高电子迁移率超高速微结构功能材料 深中心     

Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.     

Detection of delamination defects in CFRP materials using ultrasonic signal processing

In this paper, signal processing techniques are tested for their ability to resolve echoes associated with delaminations in carbon fiber-reinforced polymer multi-layered composite materials (CFRP) detected by ultrasonic methods. These methods include split spectrum processing (SSP) and the expectation-maximization (EM) algorithm. A simulation study on defect detection was performed, and results were validated experimentally on CFRP with and without delamination defects taken from aircraft. Comparison of the methods for their ability to resolve echoes are made.     

Multi-scale homogenization-based modeling of semi-crystalline polymers

This paper presents a finite-strain, multi-scale constitutive model for semi-crystalline polymers, accounting explicitly for the current state and evolution of the underlying crystallographic, lamellar and morphological texture. Specifically, a semi-crystalline polymer is modeled as a two-scale composite, assumed to be, at the larger length scale, an aggregate of randomly distributed grains that, at the smaller length scale, are made up of alternating layers of an amorphous and a crystalline phase. The model incorporates finite elasticity for the amorphous phase and crystallographic hardening for the crystalline phase. The instantaneous effective response of this composite is determined by means of multi-scale homogenization methods, consisting in the use of a “linear comparison composite” (LCC) with the same internal structure as the actual nonlinear composite, with local properties that are optimally chosen via suitably designed variational principles. The effective properties of the resulting two-scale LCC are obtained through a “sequential” homogenization procedure, involving the exact solution for the effective behavior of the lamellar grains and a self-consistent estimate for the aggregate. The latter results are also used to establish evolution laws for the appropriate internal variables in the material. The predictions of the model for the macroscopic response and texture evolution in high-density polyethylene are confronted with available experimental results and compared with those of earlier models.     

光频段双层手征结构光学特性及负折射率研究

设计了一种工作在光波段的新型四重对称的双层手征结构,通过数值模拟得到透射系数和反射系数,反演计算了结构的圆二色性、旋光角、手征参数和折射率。结果表明该结构在谐振波长附近具有很强的旋光性,并且在椭偏度为零时,即透射光变成完全线偏振光时,旋光角达到了55°;在一定波段内可以实现左旋圆偏振光(LCP)和右旋圆偏振光(RCP)的负折射率,且不需要介电常数和磁导率同时为负,更重要的是,实现负折射率的左旋圆偏振光(LCP)具有较宽的频带,不局限于谐振波长附近,在椭偏度为零时,折射率也为负。考虑到具体的实验制作,对加衬底的手征结构进行了数值模拟,结果表明谐振波长向长波长方向产生了偏移,完全线性偏振光的旋光角仍然有40°。     

高质量等曲率物参光像面数字全息显微系统

对等曲率物参光像面数字全息显微成像系统进行研究,分析了光路配置方法,推导了系统的点扩散函数,并由此指出了决定系统成像分辨率的因素及系统的成像特点,最后讨论了再现像光场一次位相畸变校正的方法.结果表明,等曲率物参光像面数字全息具有最大的信息容量;该系统的成像分辨率取决于显微物镜的数值孔径和CCD的像元大小,与CCD的光敏面尺寸无关;物体各点中通过显微物镜的所有频率成分均能被系统完全记录与再现,样品被照亮区域的大小对记录条件和再现像质没有影响;等曲率物参光像面数字全息系统是一种优化的全息记录与再现系统,利用该系统可以实现高质量成像.实验结果验证了理论分析的正确性.