Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Visible and near-IR luminescence via energy transfer in rare earth doped mesoporous titania thin films with nanocrystalline walls

Selected photoluminescence in the wavelength range of 600-1540 nm is generated by energy transfer from a light-gathering mesostructured host lattice to an appropriate rare earth ion. The mesoporous titania thin films, which have a well-ordered pore structure and two-phase walls made of amorphous titania and TiO₂ nanocrystallites, were doped with up to 8 mol% lanthanide ions, and the ordered structure of the material was preserved. Exciting the titania in its band gap results in energy transfer and it is possible to observe photoluminescence from the crystal field states of the rare earth ions. This process is successful for certain rare earth ions (Sm³⁺, Eu³⁺, Yb³⁺, Nd³⁺, Er³⁺) and not for others (Tb³⁺, Tm³⁺). A mechanism has been proposed to explain this phenomenon, which involves energy transfer through surface states on titania nanocrystals to matching electronic states on the rare earth ions.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Dielectric properties of beryllia ceramics in the near-millimeter wavelength range

We report the refractive indices and absorption coefficients for four beryllia (BeO) ceramic samples. These dielectric properties have been measured over the range from 4 to 18 cm^–1 by use of a Michelson interferometer. The index n, follows the linear relationship n=0.6517 cm³/g×+0.7130 with density, , over the range 2.8<<3.0 g/cm³.     

The effect of ionizing radiation on microbiological decontamination of medical herbs and biologically active compounds

Several thousand tons of medical herbs are produced annually by pharmaceutical industry in Poland. This product should be of highest quality and microbial purity. Recently, chemical methods of decontamination are recognized as less safe, thus irradiation technique was chosen to replace them in use. In the Institute of Nuclear Chemistry and Technology the national program on the application of irradiation to the decontamination of medical herbs is in progress now. The purpose of the program is to elaborate, on the basis of research work, the facility standards and technological instructions indispensable for the practice of radiation technology.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

The photoluminescence of Co-Al-layered double hydroxide

We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH).It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated.Its excitation spectrum shows a maximum peak near the wavelength 370nm,the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue.This new optical property will be expected to extend the potential applications of LDHs in optical materials field.     

Spectral studies on VO ions in potassium thiourea bromide single crystals using EPR and optical absorption spectroscopy

Electron paramagnetic resonance (EPR) studies have been carried out on VO²⁺ ions doped in single crystals of ferroelectric material, potassium thiourea bromide (PTB) at room temperature and in the temperature range 103–343 K on X-band MW frequency. An isotropic octet spectrum characteristic of VO²⁺ ion was obtained due to the fast re-orientation of the VO²⁺ in PTB lattice, which exhibits glassy nature at certain range around room temperature. The temperature dependant EPR spectra of VO²⁺ ions in this host lattice has been attributed to the occurrence of multiple phase transitions due to the combined environment effects of KBr and thiourea materials in the single crystal. From the optical absorption spectrum, the crystal field splitting parameter Dq, tetragonal parameters Ds and Dt have been evaluated and discussed.     

Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins

Highly protein-resistant, self-assembled monolayers (SAMs) of dendritic polyglycerols (PGs) on gold can easily be obtained by simple chemical modification of these readily available polymers with a surface-active disulfide linker group. Several disulfide-functionalized PGs were synthesized by N,N'-dicyclohexylcarbodiimide-mediated ester coupling of thioctic acid. Monolayers of the disulfide-functionalized PG derivatives spontaneously form on a semitransparent gold surface and effectively prevent the adsorption of proteins, as demonstrated by surface plasmon resonance (SPR) kinetic measurements. A structure-activity relationship relating the polymer architecture to its ability to effectuate protein resistance has been derived from results of different surface characterization techniques (SPR, attenuated total reflectance infrared (ATR-IR), and contact-angle measurements). Dendritic PGs combine the characteristic structural features of several highly protein-resistant surfaces: a highly flexible aliphatic polyether, hydrophilic surface groups, and a highly branched architecture. PG monolayers are as protein resistant as poly(ethylene glycol) (PEG) SAMs and are significantly better than dextran-coated surfaces, which are currently used as the background for SPR spectroscopy. Due to the higher thermal and oxidative stability of the bulk PG as compared to the PEG and the easy accessibility of these materials, dendritic polyglycerols are novel and promising candidates as surface coatings for biomedical applications.     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.