噻虫胺分子印迹电化学传感器的制备与应用EI北大核心CSCD

以噻虫胺为模板分子,通过恒电位沉积壳聚糖,在还原氧化石墨烯(RGO)修饰的玻碳电极表面制备了可特异性识别噻虫胺的分子印迹传感器。采用交流阻抗法(EIS)、差分脉冲伏安法(DPV)和循环伏安法(CV)对传感器的电化学性能进行表征,优化了电沉积时间、洗脱圈数、孵化时间及溶液pH等实验条件。在优化条件下,以K_(3)[Fe(CN)_(6)]作为电活性探针,DPV峰电流强度与噻虫胺浓度在1.0~1000 nmol/L范围内呈良好的线性关系,检出限0.46 nmol/L。将本方法应用于实际样品中噻虫胺的含量测定,加标回收率为97.6%~103.2%。     

Disposable Electrochemical Sensor for Food Colorants Detection by Reduced Graphene Oxide and Methionine Film Modified Screen Printed Carbon Electrode

A facile synthesis of reduced graphene oxide (rGO) and methionine film modified screen printed carbon electrode (rGO-methionine/SPCE) was proposed as a disposable sensor for determination of food colorants including amaranth, tartrazine, sunset yellow, and carminic acid. The fabrication process can be achieved in only 2 steps including drop-casting of rGO and electropolymerization of poly(L-methionine) film on SPCE. Surface morphology of modified electrode was studied by scanning electron microscopy (SEM). This work showed a successfully developed novel disposable sensor for detection of all 4 dyes as food colorants. The electrochemical behavior of all 4 food colorants were investigated on modified electrodes. The rGO-methionine/SPCE significantly enhanced catalytic activity of all 4 dyes. The pH value and accumulation time were optimized to obtain optimal condition of each colorant. Differential pulse voltammetry (DPV) was used for determination, and two linear detection ranges were observed for each dye. Linear detection ranges were found from 1 to 10 and 10 to 100 µM for amaranth, 1 to 10 and 10 to 85 µM for tartrazine, 1 to 10 and 10 to 50 µM for sunset yellow, and 1 to 20 and 20 to 60 µM for carminic acid. The limit of detection (LOD) was calculated at 57, 41, 48, and 36 nM for amaranth, tartrazine, sunset yellow, and carminic acid, respectively. In addition, the modified sensor also demonstrated high tolerance to interference substances, good repeatability, and high performance for real sample analysis.     

The Effects of Hydrophobicity and Textural Properties on Hexamethyldisiloxane Adsorption in Reduced Graphene Oxide Aerogels

To expand the applications of graphene-based materials to biogas purification, a series of reduced graphene oxide aerogels (rGOAs) were prepared from industrial grade graphene oxide using a simple hydrothermal method. The influences of the hydrothermal preparation temperature on the textural properties, hydrophobicity and physisorption behavior of the rGOAs were investigated using a range of physical and spectroscopic techniques. The results showed that the rGOAs had a macro-porous three-dimensional network structure. Raising the hydrothermal treatment temperature reduced the number of oxygen-containing groups, whereas the specific surface area (S_BET), micropore volume (V_micro) and water contact angle values of the rGOAs all increased. The dynamic adsorption properties of the rGOAs towards hexamethyldisiloxane (L2) increased with increasing hydrothermal treatment temperature and the breakthrough adsorption capacity showed a significant linear association with S_BET, V_micro and contact angle. There was a significant negative association between the breakthrough time and inlet concentration of L2, and the relationship could be reliably predicted with a simple empirical formula. L2 adsorption also increased with decreasing bed temperature. Saturated rGOAs were readily regenerated by a brief heat-treatment at 100 °C. This study has demonstrated the potential of novel rGOA for applications using adsorbents to remove siloxanes from biogas.     

Bound to continuum intersubband transition optical properties in the strain reducing layer-assisted InAs quantum dot structure

In this paper, the impact of wetting layer, strain reducing layer and dot height on the electronic, linear and nonlinear optical properties of bound to continuum states transitions are investigated in a system of InAs truncated conical shaped quantum dot covered with the In_xGa_1−x As strain reducing layer. The electronic structure, containing two main states of S and wetting layer states (WL), was calculated by solving one electronic band Hamiltonian with effective-mass approximation. The results reveal that the presence of the strain reducing layer in the structure extends the quantum dot emission to longer wavelength which is reported as a red-shift of the photoluminescence (PL) peak in the experimental measurement. This study also highlights the possibility of improving the intersubband optical properties based on the significant size-dependence of the three layer dot matrix by employing the strain reducing and wetting layers. According to this simulation, relatively tall dots on the thick wetting layer introduce the optimized structure size for practical applications to meet the SRL assisted enhanced dot structure.     

Revelation of ESIPT mechanism for the novel fluorescent system HNIBT in toluene and methanol solvents: A TDDFT study

In this work, we devote to explore excited‐state intramolecular proton transfer (ESIPT) behavior for a novel fluorescent molecule naphthalimide‐based 2‐(2‐hydroxyphenyl)‐benzothiazole (HNIBT) [New J. Chem. 2019, 43, 9152.] in toluene and methanol (MeOH) solvents. Exploring weak interactions, stable HNIBT‐enol, and HNIBT‐MeOH‐enol complex can be found in S₀ state via TDDFT/B3LYP/6‐311+G(d,p) level. Given photoexcitation, intramolecular hydrogen bond O1? H2···N3 of HNIBT‐enol and HNIBT‐MeOH‐enol is dramatically enhanced, which offers impetus for facilitates ESIPT reaction. After repeated comparisons, we verify the unavailability of intermolecular hydrogen bonding effects between HNIBT‐enol and MeOH molecules. In view of excitation, HOMO (π) → LUMO (π*) transition and the changes of electronical densities indeed impulse ESIPT tendency. Via constructing potential energy curves (PECs), for both HNIBT‐enol and HNIBT‐MeOH‐enol complex, the ESIPT could only occur along with intramolecular hydrogen bond O1? H2···N3. Through comparison, the potential barrier falls from 4.124 kcal/mol (HNIBT‐enol) to 2.132 kcal/mol (HNIBT‐MeOH‐enol). Therefore, we confirm that the ESIPT of the HNIBT system happens more easily in the MeOH solvent compared with the toluene solvent.     

纳米银/二维石墨相氮化碳/还原氧化石墨烯复合材料的制备及其光催化降解抗生素

为优化石墨相氮化碳(g-C₃N₄)光催化剂的结构,改善其对污染物的降解性能,本文以三聚氰胺为前驱体,通过高温煅烧和热氧化剥离制备了二维石墨相氮化碳(2D-C₃N₄),并用光还原法一步合成纳米银/二维石墨相氮化碳/还原氧化石墨烯(Ag/2D-C₃N₄/rGO)复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)、X射线光电子能谱(XPS)、氮气吸附脱附等温曲线(BET)等对材料进行表征。 以头孢曲松钠为目标污染物,探究pH值、催化剂用量、头孢曲松钠初始浓度等因素对催化剂的吸附、降解性能的影响,并探究降解反应机理。 当pH=6.0,催化剂用量为0.3 g/L,头孢曲松钠初始浓度为10.0 mg/L时,复合材料对头孢曲松钠的降解率可达到89.1%。 催化剂的稳定性较强,具有实际应用价值,可用于处理含头孢类抗生素的废水。     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

Automatic kinetic model generation and selection based on concentration versus time curves

The goal of the paper is to automatize the construction and parameterization of kinetic reaction mechanisms that can describe a set of experimentally measured concentration versus time curves. Using the framework and theorems of formal reaction kinetics, first, we build a set of possible mechanisms with a given number of measured and unmeasured (real or fictitious) species and reaction steps that fulfill some chemically reasonable requirements. Then we fit all the corresponding mass-action kinetic models and offer the best one to the chemist to help explain the underlying chemical phenomenon or to use it for predictions. We demonstrate the use of the method via two simple examples: on an artificial, simulated set of data and on a small real-life data set. The method can also be used to do a kind of lumping to generate a model that can reproduce the simulation results of a detailed mechanism with less species and thereby can largely accelerate spatially inhomogeneous simulations.     

AN EXPLICIT FINITE VOLUME SPATIAL MARCHING METHOD FOR REDUCED NAVIER–STOKES EQUATIONS

This paper develops a spatial marching method for high-speed flows based on a finite volume approach. The method employs the reduced Navier– Stokes equations and a pressure splitting in the streamwise direction based on the Vigneron strategy. For marching from an upstream station to one downstream the modified five-level Runge–Kutta integration scheme due to Jameson and Schmidt is used. In addition, for shock handling and for good convergence properties the method employs a matrix form of the artificial dissipation terms, which has been shown to improve the accuracy of predictions. To achieve a fast rate of convergence, a local time-stepping concept is used. The method retains the time derivative in the governing equations and the solution at every spatial station is obtained in an iterative manner. The developed method is validated against two test cases: (a) supersonic flow past a flat plate; and (b) hypersonic flow past a compression corner involving a strong viscous–inviscid interaction. The computed wall pressure and wall heat transfer coefficients exhibit good general agreement with previous computations by other investigators and with experiments.     

基于特征正交分解的一类瞬态非线性热传导问题的新型快速分析方法

提出了一种基于特征正交分解(POD)和有限元法的瞬态非线性热传导问题的模型降阶快速分析方法, 建立了导热系数随温度变化的一类瞬态非线性热传导问题有限元格式的POD降阶模型. 在隐式时间推进方法的基础上有效结合单元预转换方法和多级线性化方法发展了一种加速求解瞬态非线性热传导降阶模型的新型计算方法,并通过二维和三维算例验证了该方法的准确性和高效性. 研究结果表明: (1)降阶模型解的均方根误差在经过初始时段轻微的脉动后稳定于0.01%以下, 而其计算效率比有限元全阶模型提高2$\sim $3个数量级, 并且自由度数量(DOFs)愈大提高的幅度也愈加显著; (2)新型算法解决了常规算法在计算非线性降阶模型时加速性能差的问题, 即使是在DOFs比较小的时候也能够明显提高计算效率; (3)常数边界条件下得到的POD模态可以用来建立相同求解域在各种复杂时变边界条件下的瞬态非线性热传导降阶模型, 并对其传热过程和温度场进行快速准确的分析与预测, 具有很好的工程应用价值.