自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

光互联网的抗毁性设计研究

由于互联网层叠模型中多层都存在重复的保护与恢复机制，致使互联网的实现极其复杂，造成网络传输效率较低，而且拥塞。随着密集波分复用（DWDM）的广泛使用和网络底层性能的大幅度提高，已经不需要再对网络中多层进行重复保护与恢复。在此基础上，采用了未来光互联网3层 (应用层、IP层和光互联层) 协议模型，并对其中的光互联层的保护进行了深入的研究，提出了部分共享备用路径保护(P-SPP)方法。此模型能充分利用IP层电子的灵活恢复机制与光互联层的快速保护与恢复机制，提高光互联网的传输性能，以适应目前高速发展的互联网对传输带宽的要求。     

三代像增强器用微通道板的改进与发展

简要说明了三代像增强器的特点，分析了微通道板的离子反馈形成机理，给出有效抑制离子反馈对光阴极造成伤害的2种方法，即一种是减少和清除微通道板的吸附气体，另一种是阻止反馈离子反馈到光阴极上。介绍了国外最新的三代像增强器，以及使用优化改进的高性能微通道板显著减薄甚至彻底去除微通道板离子反馈膜的方法，该方法能维持砷化镓光阴极足够长的工作寿命，还介绍了最新发展的体导电微通道板和硅微通道板。指出高可靠性无膜选通砷化镓像增强器技术的实现，不仅需要微通道板在抑制离子反馈方面取得突破，还需要砷化镓光阴极在耐受离子反馈能力上进一步提高，同时还要结合和拓展选通电源的应用。     

一类非线性方程解的存在和唯一性及在图像中的应用

本文我们给出一个修正的非线性扩散方程模型，与Cotte Lions和Morel的模型相比该模型有许多实质上的优点。主要的想法是把原来去噪声部分：卷积Gauss过程替代为解一个有界区域上的线性抛物方程问题，因此避开了对初始数值如何全平面延拓的问题。我们从数学上的证明该问题解的存在性和适定性，同时给出对矩形域情况的解的级数形式。最后我们给基于本模型的数值计算差分模型，并且给出几个具体图像在该模型下处理结果。     

Vector-Orthogonality and Lanczos-Type Methods

A method for solving a linear system is defined. It is a Lanczos-type method, but it uses formal vector orthogonality instead of scalar orthogonality. Moreover, the dimension of vector orthogonality may vary which gives a large freedom in leading the algorithm, and controlling the numerical problems. The ideas of truncated and restarted methods are revisited. The obtained residuals are exactly orthogonal to a space of increasing dimension. Some experiments are done, the problem of finding automaticaly good directions of projection remains partly open.     

The origin of the formation of cavities in galvanized coatings

The role of water‐soluble corrosion products on galvanized wires was examined. The samples used were industrial hot‐dip galvanized wires, which were exposed to the open air under all weather conditions for a relatively short time (6 and 12 months), in an urban environment close to the sea. The samples were studied by different methods, i.e. scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and optical microscopy (OM). Several phases were detected because of the galvanization procedure and the steel substrate. Furthermore, phases which were formed as a result of the reaction of zinc with the atmosphere were also detected. These were oxides like ZnO, carbonates like ZnCO₃ and hydrated Zn and Fe sulfates. Their presence influences the corrosion resistance of the wires, which finally, strongly depends on the solubility of the wires in water. The SO₄^2? compounds especially are very soluble and consequently are easily removed from the coating surface, leading to its degradation by the formation of cavities. In any case, their presence, even after a short period of exposure, implies that the coating is highly affected by the atmosphere of the modern city. Copyright © 2006 John Wiley & Sons, Ltd.     

A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy

An apparatus has been designed and implemented to measure the elastic tensile properties (Young's modulus and tensile strength) of surface micromachined polysilicon specimens. The tensile specimens are “dog-bone” shaped ending in a large “paddle” for convenient electrostatic or, in the improved apparatus, ultraviolet (UV) light curable adhesive gripping deposited with electrostatically controlled manipulation. The typical test section of the specimens is 400 μm long with 2 μm×50 μm cross section. The new device supports a nanomechanics method developed in our laboratory to acquire surface topologies of deforming specimens by means of Atomic Force Microscopy (AFM) to determine (fields of) strains via Digital Image Correlation (DIC). With this tool, high strength or non-linearly behaving materials can be tested under different environmental conditions by measuring the strains directly on the surface of the film with nanometer resolution.     

书籍扫描图像畸变参数自动计算方法的研究

为实现书籍扫描图像的畸变自动校正,提出用多项式来描述各像素的理论灰度g(zi)与页面上对应点到扫描仪工作平面距离zi二者之间的关系。为确立该多项式,在畸变参数已知条件下扫描一幅图像,根据已知畸变参数求出zi,即可按最小二乘法原理由各像素灰度的实际值求出多项式的各个系数。实验证明,采用4阶多项式已能满足一般要求,并求出了各系数。对任意扫描图像,自动计算畸变参数的方法为:首先利用扫描图像上页边空白处各像素的灰度,对畸变参数进行估计,并求出zi的估计值;然后代入所确立的多项式,可求得g(zi);通过调整各畸变参数的估计值,直到g(zi)与gi最为接近,即得最佳畸变参数。用于图像校正实验,获得了较好的校正效果,最大误差由不校正时的41%下降到了6.9%。这使得无需用户测量并输入有关畸变参数即可进行自动校正。     

On a nonlinear multigrid algorithm with primal relaxation for the image total variation minimisation

Digital image restoration has drawn much attention in the recent years and a lot of research has been done on effective variational partial differential equation models and their theoretical studies. However there remains an urgent need to develop fast and robust iterative solvers, as the underlying problem sizes are large. This paper proposes a fast multigrid method using primal relaxations. The basic primal relaxation is known to get stuck at a ‘local’ non-stationary minimum of the solution, which is usually believed to be ‘non-smooth’. Our idea is to utilize coarse level corrections, overcoming the deadlock of a basic primal relaxation scheme. A further refinement is to allow non-regular coarse levels to correct the solution, which helps to improve the multilevel method. Numerical experiments on both 1D and 2D images are presented.     

多元线性回归应用于近代物理实验

本文介绍非线性方程转化直线性方程和多元线性回归法来分析近代物理实验中塞曼效应分裂干涉圆环多处选点测量的处理过程。