消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。     

交变电场作用下骨表面温升的实验研究

骨具有力电性质,这一性质可促进骨组织生长。骨既是生理器官又是介电材料,在交变电场作用下,其表现行为可能有生理作用。为此,本文测量了骨悬臂梁试样在交变电场下的表面温升与顶端挠度。发现在电压70V,频率为10~70kHz的交流电场下,最大表面温升达到2~4℃,最大挠度变化为9.0~78.7μm;在频率10kHz,电压为70~175V的交流电场下,最大表面温升达到4~6℃,最大挠度变化为13.0~114.3μm。同时测量了两种经典介电材料有机玻璃和聚乙烯在交变电场下的温升与顶端挠度,最大温升低于0.5℃,但是挠度与骨试样相当,所以相对高温升是骨特有的性质。将交流电压有效值替换成相同幅值的直流电压时,最大温升也低于0.5℃,基本没有挠度变化,所以相对的高温升反映了骨的交流性质。分析后认为,骨在交变电场作用下的温升由胶原的介电损耗引起。实验数据显示,骨在交变电场下,表面温度变化与加载电压的平方成正比,且在实验加载的10~70kHz频段内,骨的介电常数随频率的变化明显。     

水硬性石灰合成及拉破坏特性试验研究

水硬性石灰在欧洲石质文物修复和加固中获得了很大成功。我国的石质文物主要是砂岩,水硬性石灰的修复效果不好。为满足我国石质文物修复和加固的需求,本文以石灰石和黏土为原料,在950℃煅烧不同时间,制备出水硬性石,对试样的成分、微观形貌、收缩率、抗拉强度和拉破坏过程等进行了研究。结果表明:(1)试样中含有水硬性成分2CaO·SiO2(C2S);煅烧8h时,成分与欧洲水硬性石灰NHL5接近;1.5CaO·SiO2·xH2O(C-S-H)和CaCO3的含量随龄期的增加逐渐增加。(2)龄期1~3d,收缩率较小;龄期4~6d,收缩率以线性规律增加;7d以后,收缩率趋于稳定。(3)局部变形区随拉应力的增加而变大,邻近局部变形区逐渐合并,形成面积更大的应变局部化带;载荷超过峰值后,产生微裂隙;随载荷进一步增加,微裂隙扩展,贯穿整个试件,发展成宏观裂隙,使试件破坏。(4)抗拉强度随龄期的增加而增加,水硬性石灰中C-S-H、CaCO3等相互交织,构成空间致密体,使试件力学强度提高。合成的水硬性石灰物理力学性能与欧洲水硬性石灰NHL5相近,并且成分均匀、可控,在石质文物修复和加固工程中具有良好应用前景。     

通过Painlevé分析从低维模型中寻找高维可积模型

将Painlevé方法推广到更一般的形式, 可以从给定的低维可积模型中得到无穷多个新的可积模型. 新的可积模型与原模型相比都是较高维的, 它们保持保角不变性和Painlevé性质. 本文主要以KdV、NLS和KP方程为例, 运用WTC法、截断展开、领头项分析等方法, 给出了(3+1)维可积模型的具体形式.     

压气机悬臂静叶流场非定常数值模拟

以现代高压压气机一排悬臂静叶与一排转叶组成的典型级为研究对象,采用非定常数值模拟方法,分析了非定常与定常数值模拟计算得出的级特性线以及峰值效率点气动参数在展向分布的差异,并对悬臂静叶内部流场结构进行了详细分析,结果表明:当悬臂静叶的轮毂设计间隙为2.5%叶高时,非定常计算的综合喘振裕度比定常大5.85%;在峰值效率点工况下,悬臂静叶总压损失和转子效率的非定常影响范围在10%以内,转叶进口相对气流角沿展向分布的影响在0.5°以内。悬臂静叶根部10%叶高以下区域出现了明显的泄漏流动,3.4%叶高压力系数变化最大,轮毂泄漏流起始于20%弦长附近,发展到70%弦长位置时泄漏损失最大,随后逐渐减弱.     

Determination of structure parameters in strong-field ionization models of atoms

The Ammosov–Delone–Krainov (ADK) and Perelomov–Popov–Terent’ev (PPT) ionization models were widely used in strong-field physics and attosecond science due to their many attractive advantages such as simpler analytical formula, less computational demands, and satisfied accuracy of ionization rate. Based on the density-functional theory, we systematically determine accurate structure parameters of 25 atoms, 24 positive ions and 13 negative ions and tabulate for future applications. The wave function with correct asymptotic behavior is obtained by solving the time-independent Schrödinger equation with B-spline basis sets and the accurate structure parameters are extracted from this wave function in the asymptotic region. The accuracies of structure parameters are carefully examined by comparing the ionization probabilities (or yields) calculated by PPT and ADK models with those of solving the three-dimensional time-dependent Schrödinger equation and the experimental data.     

Dynamics of strong-field double ionization of H_2 in co-rotating two-color circularly polarized laser fields

Double ionization of H_2 in a co-rotating two-color circularly polarized(TCCP) laser field is theoretically investigated. By changing the ratio of electric field peak amplitudes of the TCCP laser pulses, the double ionization probability as a function of the laser intensity shows a clear knee structure, which is suppressed significantly in the case of the atom. Due to the large spatial range of the electronic initial distribution, with the analysis of classical trajectories of ionized electrons, it is found that the ionization of the electron in the farther distance increases the probability of recollision. Furthermore, the yield of nonsequential double ionization created by the recollision can be enhanced by controlling the amplitude ratio of the TCCP laser field.     

基于L1正则化的随机梁式结构静力损伤识别方法

提出了一种结合摄动法和L1正则化方法的随机梁式结构静力损伤识别方法。考虑初始模型误差和测量误差的影响,建立了关于随机损伤指数的控制方程,并将摄动法和L1正则化方法相结合,对随机损伤指数的控制方程进行求解,进而从概率的角度对结构的损伤进行识别。损伤试验结果表明,和传统的最小二乘求解法相比,本文方法能够更为准确地识别多处局部损伤的位置及大小,对实际结构损伤检测具有较好的参考价值。     

Recent Advances in Spatial Self-Phase Modulation with 2D Materials and its Applications

In recent years, spatial self-phase modulation (SSPM) with two-dimensional (2D) materials has attracted the attention of many researchers as an emerging and ubiquitous nonlinear optical effect. In this review, the state of the art of 2D material-based SSPM is summarized. SSPM measures or tunes the nonlinearity of 2D materials, and it is also an effective approach to study the band structure of 2D materials. Several modified forms of SSPM, such as high-order, white-light-excited, vector field excited, and optically nonlinearly enhanced SSPM are also presented. Subsequently, the physical origin of the SSPM formation mechanism is compared and analyzed. Furthermore, the applications of SSPM with 2D materials, including passive photonic devices, generation of Bessel beams, and identifying the mode of the orbital angular momentum, are listed. Finally, several urgent problems of the SSPM with 2D materials, potential applications, and prospects for future development are presented.     

Integrable boundary conditions for the B_2 model

New integrable B_2 model with off-diagonal boundary reflections is proposed. The general solutions of the reflection matrix for the B_2 model are obtained by using the fusion technique. Wefind that the reflection matrix has 7 free boundary parameters, which are used to describe the degree of freedom of boundary couplings, without breaking the integrability of the system. The new quantization conditions will induce the novel structure of the energy spectrum and the boundary states. The corresponding boundary effects can be studied based on the results in this paper. Meanwhile, the reflection matrix of high rank models associated with Bnalgebra can also be obtained by using the method suggested in this paper.