RAP晶体积分衍射效率的实验研究

以北京同步辐射装置的4B7中能束线为光源,对RAP（邻苯二甲酸氢銣）晶体的积分衍射效率进行了实验标定.结果显示:晶体在不同能量段都得到了完整的衍射峰,扭摆曲线的光滑性和对称性较好,在偏离布喇格角以后衍射效率都迅速下降到本底量级.在2.1~5.8 keV范围内,晶体的积分衍射效率在1×10－4rad左右.     

Auq+(q=53-47)激光等离子体的辐射复合速率系数

辐射复合过程在超组态碰撞辐射(SCROLL)模型中真实模拟非局域热动力学平衡(non-LTE)高Z材料Au激光等离子体M带谱5f-3d跃迁中各种复杂离子的电离态特性是一个主要过程.基于准相对论多组态Hartree-Fock理论和扭曲波近似,采用组态平均的方法,从头计算了金M带类铁金离子-类锗金离子的辐射复合速率系数,计算过程中包含了大量的单激发和双激发态,结果表明高Z元素由于自电离能级的广泛分布和复杂的级联效应,致使高Z元素的辐射复合系数不同于低Z元素的,其计算结果可用来模拟Au的激光等离子体M带5f-3d跃迁的平均电离度和电荷态分布及能级布居数.     

Discrete-ordinate radiative transfer in a stratified medium with first-order rotational Raman scattering

Rotational Raman scattering (RRS) by air molecules in the Earth's atmosphere is predominantly responsible for the Ring effect: Fraunhofer and absorption-feature filling-in observed in UV/visible backscatter spectra. Accurate determination of RRS effects requires detailed radiative transfer (RT) treatment. In this paper, we demonstrate that the discrete-ordinate RT equations may be solved analytically in a multi-layer multiple scattering atmosphere in the presence of RRS treated as a first-order perturbation. Based on this solution, we develop a generic pseudo-spherical RT model LIDORT-RRS for the determination of backscatter radiances with RRS included; the model will generate output at arbitrary viewing geometry and optical thickness. Model comparisons with measured RRS filling-in effects from OMI observations show very good agreement. We examine telluric RRS filling-in effects for satellite-view backscatter radiances in a spectral range covering the ozone Huggins absorption bands. The model is also used to investigate calcium H and K Fraunhofer filling-in through cloud layers in the atmosphere.     

Total dielectronic recombination rate coefficient for Co-like tungsten

Ab initio calculation of the total dielectronic recombination (DR) rate coefficient from the ground state 3s²3p⁶3d⁹(J=5/2) of Co-like tungsten is performed employing the relativistic distorted-wave approximation with configuration-interaction. The DR contributions mainly come from complex series 3d⁸4ln′l′. The complex series 3p⁵3d¹⁰n′l′, 3p⁵3d⁹4ln′l′ and 3d⁸5ln′l′ also contribute significantly to the total DR rates at relatively high electron temperatures. The l′ and n′ dependences of the partial rate coefficient are investigated. The inclusion of decays into autoionizing levels followed by radiative cascades (DAC) enlarges the total DR rate coefficients by a factor of about 10%. The level-by-level extrapolation method is developed to include DAC effects. The total DR rate coefficients are fitted to an empirical formula. It is shown that at temperatures above 2.5 keV the Burgess-Merts (BM) semiempirical formula can provide DR results with an accuracy of about 15%, whereas at electron temperatures below 100 eV it underestimates the DR rate coefficients by up to a few orders of magnitude and its temperature dependence is completely inadequate. The comparison of the results for Ni-like and Co-like tungsten shows that these two sets of DR rate coefficients are very close in magnitude at relatively high electron temperatures.     

Measurement of Optical Constants of CVD-Diamond for Short-Wavelength Far-Infrared Lasers

A diagnostic system using short-wavelength far-infrared (FIR) lasers (40–70 m in wavelength) is now being developed for high density and large volume plasmas. In the wavelength region, a CVD-diamond is the excellent materials for optical windows of the laser and the plasma vessel and beam splitters of a multichannel interferometer. To design these optical elements, the optical constants (refractive index n, absorption coefficient and transmissivity T) of the CVD-diamond have been measured precisely by using FIR lasers of 48-, 57- and 71-m in wavelength. As an example, the result for 57.1511 m light is n = 2.383(1) ± 0.002, = 0.19 ± 0.05 cm^-1 and T = 97.5 ± 1.5% at 1.023 mm in thickness.     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

热压工艺参数对n型和p型Bi2Te3基赝三元热电材料电学性能的影响

通过熔炼/研磨/热压方法制备了n型和p型赝三元Bi₂Te₃基的热压合 金样品，测量了由不同工艺参数(热压温度、热压压力)制备的样品Seebeck系数和电导率.分析了热压参数对热电性能产生的影响.特别是发现了增加热压压力和热压温度会使n型和p型热压样品的Seebeck系数和电导率都有所提高，这与单晶和取向晶体材料的Seebeck系数和电导率变化趋势相反的规律显然不同，其结果对热压样品的电学性能提高有积极的影响. 关键词： 热电材料 热压 Seebeck系数 工艺参数     

电子与离子碰撞过程中辐射复合截面的相对论理论研究

在相对论理论框架下,研究了自由电子与离子碰撞的辐射复合过程.在分析影响单电子体系(类H+离子及碱金属离子)辐射复合截面主要因素的基础上,总结出了辐射复合截面在不同情况下的变化规律.     

有机场致发光中能带模型与分子理论的讨论

在有机场致发光中,能带模型及分子理论从20世纪就存在尖锐的矛盾。在分层优化方案中,经SiO₂加速后的电子能量可以到达10eV,这足以激发发光材料发光,将分层优化方案应用到有机场致发光材料中。发现了固态阴极射线发光(SSCL),经过对它的交叉证明、普适性的验证,肯定了固态阴极射线的发光确实是在发光二极管,无机及有机场致发光之外的一种完全新型的电场诱导的发光。SSCL的特征是在它的光谱中出现短波发光峰,实验证明长波发光峰的减弱是由于电场离化效应。研究了这种效应出现的电压阈值并和SSCL的短波峰出现的电压相比,发现短波峰的出现是在激子的电场离化之后,从而找出了电子处于局域态与扩展态的分水岭,解释了在有机场致发光中能带模型和分子理论并不矛盾,只是适用的条件不同。激子的离化是随电场强度而渐进的变化,因此会有一个两种过程并存的范围。     

雾化喷射冷却的机理及模型研究

雾化喷射冷却的换热机理十分复杂,目前其研究还很不成熟。本文从喷射雾滴的特性参数出发,以被冷却表面上形成的喷射液膜为对象,考虑了冷却液体向环境的散热,建立质量、能量守恒方程,得到半经验半解析的雾化喷射换热模型。其中,本文提出真换热系数和显换热系数的概念,认为显换热系数受空间散热影响,而真换热系数只与喷雾动量有关。最后设计了雾化喷射局部换热实验,对模型进行检验,结果表明,该模型能够较好地符合实验所得的换热系数及加热面表面温度沿喷射半径的分布趋势。