Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Radiation formation of polymeric nanogels

An alternative method of synthesis of polymeric nanogels is proposed, based not on polymerization, but on intramolecular crosslinking of polymer chains, initiated by pulse irradiation in dilute aqueous solutions. Kinetic data show that for many water-soluble polymers irradiation under these conditions result in intramolecular crosslinking. Preliminary product studies on poly(vinyl alcohol) indicate that in fact internally crosslinked macromolecules can be obtained by this technique.     

Radioresistance studies in Methylobacterium spp.

Methylobacterium extorquen was isolated and was found as one of the most resistant microorganisms in the original bioburden of ophthalmic cotton dressings to be submitted to γ radiation sterilization. Radiation survival curves were simultaneously performed in phosphate buffer and in test-pieces on two isolates, one obtained before irradiation (wild strain) and the other after irradiation at 20 kGy (rad strain), as well as on three type strains of Methylobacterium spp. (M. extorquens^T, M. radiotolerans^T and M. fujisawaense^T). The radiation resistance was compared using D_values. To analyze the effect of non linearity on radioresistance other measures were applied, such as intercept point, fraction of surviving cells at a selected dose and area. The ranking of strains with these approaches showed to be different, pointing out the need of an integrated measure of radioresistance. Therefore, an index of relative survival (IRS) is proposed.     

LC polyimides. XXXVI. Poly(ester imide)s derived from N,N′‐Bis(4‐hydroxyphenyl)biphenyl‐3,3′,4,4′‐tetracarboxylic diimide and aliphatic dicarboxylic acids

A new mesogenic monomer was prepared from biphenyl‐3,3′,4,4′‐tetracarboxylic dianhydride and 4‐aminophenol followed by the acylation of OH groups with propionic anhydride. This diphenol propionate was polycondensed by transesterification with decane‐1,10‐dicarboxylic acid, dodecane‐1,12‐dicarboxylic acid, and eicosane‐1,20‐dicarboxylic acid or with equimolar mixtures of two dicarboxylic acids. The resulting poly(ester imide)s were characterized by elemental analyses, ¹H NMR spectra, inherent viscosities, DSC measurements, optical microscopy, and X‐ray measurements with synchrotron radiation at variable temperatures. An enantiotropic smectic A phase in the molten state and a crystalline smectic E (or H) phase in the solid state were found in all cases. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3019–3027, 2000     

Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol

A well‐known limitation in the fabrication of metal‐graphene composite has been the use of surfactants that strongly adsorb on the surface and reduce the performance of the catalyst. We demonstrate here a novel one‐pot synthesis of gold nanoparticles by laser ablation of gold strip and in‐situ decoration on graphene substrate. Not only the impregnation of nanoparticles was linker free, but also the synthesis by itself was surfactant‐free. The composite materials were well characterized morphologically and functionally using electron microscopy, X‐ray and electron diffraction, Raman spectroscopy, Zeta potential, electrochemical measurements and UV‐Visible spectroscopic techniques. This linker‐free gold‐graphene based composite has been employed for catalytic applications pertaining to electrooxidation. We have explored the use of this composite as a binder‐free electrode in electrocatalytic oxidation of methanol and ethanol in alkaline medium. Additionally, the onset potential for ethanol oxidation was found to be more negative, ?100 mV, an indication of its promising application in direct ethanol fuel cells.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Macrocyclic ZnII and CuII complexes as guests of the hybrid composites based on the layered MnPS3 phase. Comparison of spectroscopic properties

A family of macrocyclic complexes [M₂LⁿCl₂] have been synthesized and characterized (M: Cu^II or Zn^II; Lⁿ: macrocyclic ligand derived from 2-hydroxy-5-methyl-1,3-benzenedicarbaldehyde and different aliphatic diamines and o-phenylenediamine). The influence of the aromaticity of the ligand and the metal center on the spectroscopic properties of the complexes (absorption and emission) has been studied. Making use of the weak interactions between hydrated potassium ions and the layers of the K_0.4Mn_0.8PS₃ precursor, the obtained macrocyclic complexes have been intercalated in the interlamellar space by a microwave assisted cationic exchange reaction. The optical properties of the obtained hybrid materials are reported. The absorption edge, recorded by solid state reflectance spectroscopy for Cu^II and the Zn^II macrocycle-based composites, is 1.67–1.76 eV, both shifted to lower energy compared with that of the pristine MnPS₃.     

基于相关因素的遥感影像辐射质量度量模型研究

目前遥感影像辐射质量评价多以目视判读为主,具有很强的主观性。针对如何客观、全面地评价遥感影像辐射质量这一问题,本文研究了一种利用质量相关因素来评价遥感影像辐射质量的度量模型。该模型提取遥感影像的四个因素指标,即亮度、清晰度、信息量和纹理特征,采用相关分析法计算各个因素指标的权值。对于清晰度指标,通过改进梯度函数,研究了新的清晰度提取方法。实验证明,对于多种不同类型的遥感影像,本模型所得的评价结果可较好地符合人眼的视觉感受。该遥感影像辐射质量度量模型能够客观、定量地分析遥感影像辐射质量,同时与主观评价具有一致性。     

激光剥蚀电感耦合等离子体质谱法测定纯铝及铝丝中铁、硅、铜、锰、镁、钛、锌、铬和镍

采用激光剥蚀电感耦合等离子体质谱法测定纯铝及铝丝中铁、硅、铜、锰、镁、钛、锌、铬和镍的含量。采用低功率等离子体,以27Al为内标。样品直径为0.5~3 mm时,直径粗细与元素的信号不相关。所有元素的分馏因子在0.94~1.13之间时,可以认为没有分馏效应;纯铝和铝合金的基体效应不明显,铸铝会影响基体效应。测定了块状和丝状标准物质,测定值与认定值基本吻合,纯铝板的测定值与直读光谱法测定结果相一致。受背景干扰的影响,测定值的相对标准偏差(n=5)在2.9%~32%之间。