High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser

Fabrication of high-resolution 3D structures with laser radiation on the surface of brittle materials has always been a challenging task. Even with femtosecond laser machining, micro-cracks and edge chipping occur. In order to evaluate processing modes optimal both in quality and productivity, we investigated high-speed (50 kHz) femtosecond laser processing of BK7 glass with the use of design of experiments and regression analysis. An automated inspection technique was developed to extract quality characteristics of test-objects. A regression model was obtained appropriate to fabricate microchannels with a predefined depth in the range of 1–30 µm with average accuracy of 5%. It was found that high quality machining modes are in the range of 0.91–2.27 µJ energy pulses, overlap of 53–62%, three and more number of passes. A material removal rate higher than 0.3 mm³/min was reached and microfluidic structures were formed based on data obtained.     

同步辐射X射线成像光束线劳厄双晶单色器设计

上海光源X射线成像光束线采用多极扭摆器(wiggler)作为辐射光源, 提出一种劳厄双弯晶单色器的设计方案. 计算结果显示, 可获得固定出口的平行单色光束, 能量调谐范围覆盖19—120keV, 在33keV时, 输出光子通量及通量密度分别为1.9×10¹³phs/s和3.8×10¹⁰phs/s/mm². 分析了劳厄晶体的聚焦及单色化性能, 计算了输出光子通量及单色器的热负载情况. 与传统的双平晶方案相比, 本设计在获得高通量和解决热负载等方面有明显的优越性, 并能有效控制热形变.     

等离子体天线色散关系和辐射场数值计算

研究了电磁波沿轴向对称柱形等离子体天线传播的特性、色散关系及辐射方向图、增益等天线参数.通过对腔体材料介电系数、内外半径、等离子体密度、碰撞频率等参数的分析，结果表明要减小波沿等离子体天线传播的衰减，应当增加等离子体密度，减小碰撞频率，增加等离子体半径，减小腔体厚度，采用介电系数较小的材料.计算了在不同参数条件下，等离子体天线的辐射方向图、增益的变化，这些结果对于等离子体天线的设计很有参考价值. 关键词： 等离子体天线 色散关系 增益 辐射方向图     

热传导方程的一类无网格方法

构造求解热传导方程的一类无网格方法,只要选择好每个节点的适当的邻点集合,便可利用节点信息顺利进行计算.作为特殊情形,也可在各种结构或非结构网格上进行计算.在矩形或均匀平行四边形网格上进行计算时具有二阶精度,当在任意的不规则四边形或三角形网格上计算时仍然是守恒的和相容的,且至少具有一阶精度.作为数值试验,将该方法用于在不规则四边形网格上及四边形与三角形混合网格上求解二维非线性抛物型方程,并在不规则四边形网格上求解二维三温辐射热传导方程,均获得了较为理想的数值结果.     

The real solution to scalar field equation in 5D black string space

After the nontrivial quantum parameters Ω _n and quantum potentials V _n obtained in our previous research, the circumstance of a real scalar wave in the bulk is studied with the similar method of Brevik and Simonsen (Gen. Rel. Grav. 33:1839, 2001). The equation of a massless scalar field is solved numerically under the boundary conditions near the inner horizon r _e and the outer horizon r _c . Unlike the usual wave function Ψ_ωl in 4D, quantum number n introduces a new functions Ψ_{ωl n} , whose potentials are higher and wider with bigger n. Using the tangent approximation, a full boundary value problem about the Schrödinger-like equation is solved. With a convenient replacement of the 5D continuous potential by square barrier, the reflection and transmission coefficients are obtained. If extra dimension does exist and is visible at the neighborhood of black holes, the unique wave function Ψ_{ωl n} may say something to it.     

Analysis of Coupling and Radiation Properties for an Improved Dielectric Waveguide Directional Coupler Utilizing a Tapering Left-Handed Slab Core

The coupling and radiation characteristics of an improved dielectric waveguide directional coupler with a tapering left-handed slab core located in the coupling region are analyzed by the staircase approximation method, which combines the building block approach and multi-mode network theory with a rigorous mode-matching procedure. Particular attentions are directed toward the radiation characteristics under different structural parameters of the coupler. Numerical results indicate that the proposed coupler is very promising by shortening the coupling length significantly while keeping the radiation loss at a low level.     

A new concept of white light generation using a nano-waveguide for the solar radiation collection use

We propose a novel system of a nano-waveguide that can be used to generate the continuous optical spectrum, i.e. white light. A system consists of two micro-ring resonators and a nano-ring resonator that can be integrated into a single system. The large bandwidth signal is generated using a soliton pulse propagating within a Kerr-type nonlinear medium, whereas the continuous bandwidth or wavelength of light signal can be performed. Results obtained have shown the potential of using such a system for white light source generation and amplification, which is discussed. The amplified pulse can be stored within a nano-waveguide, which is allowed to form the continuous spectrum after amplification. Alternatively, the low-level solar radiation can be amplified, and the bandwidth signals can also be enlarged.     

基于Vega的红外图像仿真

介绍了红外成像仿真的基本理论,讨论了利用Vega传感器模块将输入的可见目标图像生成红外图像的技术。该技术使用Creator软件进行三维几何建模和纹理映射,使用TMM软件进行红外材质建模;然后,用Mat软件进行大气衰减的计算;最后,用SensorWorks软件进行传感器特性建模,通过光电转换生成红外图像。以阿帕奇AH6直升机为例进行了红外图像仿真,结果表明,利用Vega传感器模块进行传感器建模,建模效果较好,成本低,易于工程实现。     

Discussion on the event horizon and quantum ergosphere of dynamic rotating black holes in a tunneling framework

According to the Parikh--Wilczek tunneling framework, the locations of the local horizons of dynamic rotating black holes can be worked out. The calculations show that the quantum ergosphere of the black hole is identical with the tunneling potential barrier set by particle's tunneling across the relevant horizon. Then, some discussions on the origin of the Hawking radiation will be shown.     

Evaluation and prediction of the degradation of space Si solar cells induced by a low-earth-orbit radiation environment

Space-graded silicon solar cells are evaluated by 1 MeV and 2 MeV electron-irradiation. The mean degradation of the maximum power (P_max) is presented and analyzed. The degradation at both electron energies has been correlated with the displacement damage dose (D_d). A good linearity between the electron D_d and the mean P_max degradation is obtained. The concept of D_d has also been used to predict the Si solar cell response in a low-earth-orbit (Altitude 799 km, Inclination 99^o) radiation environment, considering the shielded effect of a 120 μ m-thick silica coverglass on reducing the radiation. Compared with the on-orbit data from a Si solar array of a Chinese satellite (duration from April 2007 to July 2010), a good match can be found between the on-orbit data and the predicted results using D_d methodology, indicating the method is appropriate for evaluating the radiation damage of the solar cells, and also to provide a new technique for studying radiation effects on the optoelectronic detectors used in many high energy physics applications, where harsh radiation environments produce damage in optoelectronic device materials.