Orientation-reversing involutions on handlebodies

The observation that the quotient orbifold of an orientation- reversing involution on a 3-dimensional handlebody has the structure of a compression body leads to a strong classification theorem, and general structure theorems. The structure theorems decompose the action along invariant discs into actions on handlebodies which preserve the -fibers of some -bundle structure. As applications, various results of R. Nelson are proved without restrictive hypotheses.

     

New dynamic axial compression columns with means for monitoring floating adapter position. Column design and utilisation in low pressure LC on soft packings

Summary The design of new dynamic, axial-compression columns with a system for continous packed bed adjustment and monitoring of the floating adapter position is described. The columns are meant for liquid chromatography at low pressures (up to 8 bar) in aqueous and organic media with stationary phases of all types. The columns have adapter position pickups for continuous automatic monitoring of the bed height (original “swellographic” monitoring). The column described with gas pressurisation was tested with soft Sephadex G-10 and G-25. In spite of the reduction in external porosity there was no dramatic increase in back-pressure. The column proved to provide long-term stability of the packed bed and improvement in resolution. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

弛豫理论对离子交换毛细管电色谱中峰压缩现象的研究

 在毛细管电色谱中,由于溶质在输运过程中所具有的电性质,常会产生一些特殊的现象。这些现象,如离子交换毛细管电色谱中产生超高柱效峰的现象,已经不能用一般的色谱理论加以解释。基于弛豫理论所建立的基本模型,在考虑溶质在两相中皆有可能发生正、反向迁移的情况下,得到了流出曲线一阶原点矩和二阶中心矩的理论表达式,并通过对溶质在两相中电扩散速率与电泳速率、电渗流速率关系的分析结果证实:溶质在固定相表面的电扩散行为可以使其保留变弱,出峰加快;而这种电扩散导致的超常柱效峰的出现具有不稳定性,只有在多方面因素综合影响匹配的情况下才可能出现。     

Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression

The brittle carbonate rock taken from the Tarim Oilfield is tested in laboratory under uniaxial compression. The acoustic emission (AE) is used to monitor the microcracking activity in rock during the experiment. Moreover, the 3D tomograms of carbonate rock after uniaxial compression are obtained by using CT imaging technology, which indicates that microcracks mutually interconnect and eventually form macroscopic fractures after failure. The PFC2D is used to model the behavior of brittle rock including microcracks propagation. The stress–strain curve and cracks distribution in rock model are obtained from the PFC simulation. The numerical results agree with the experimental test well.     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

Wrinkle morphologies with two distinct wavelengths

Wrinkles with two distinct wavelengths formed sequentially on the same surface are investigated. A series of aligned wrinkles are formed through local strain application on a partially crosslinked elastomer. After the formation of these primary wrinkles, the elastomer is fully crosslinked, and a mechanical compressive strain is applied to the sample orthogonal to the primary wrinkles. This mechanical strain results in smaller secondary wrinkles superimposed on the larger primary aligned wrinkles. Resulting biaxial morphologies suggest that the primary pattern directs the formation of the smaller wrinkles. The modulus mismatch of the substrate on primary and secondary wrinkle formation dictates the ratio between the two resulting wavelengths, as well as the specific biaxial morphologies, ranging from zigzag ridges to ellipsoidal bumps or corn‐on‐the‐cob structures to the classic herringbone. The sequential strain wrinkling process has the potential to be used on an industrial scale for the facile formation of surface topography with two discrete, tunable lateral dimensions over large surface areas. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

Effects of graded porous structure on local strain distribution under compression in silicone rubber

Silicone rubber samples with gradually changing pore sizes within the range of 70–610 μm are produced using an improved spacer method. The samples are scanned using an X‐ray computed tomography to evaluate their graded structure as compared to uniform rubber. A compressive test reveals that graded porous silicone rubber has characteristic stress–strain curves whose slope changes within a specific strain range depending on the porous structure. Analysis results of local strain based on a digital image correlation of the graded porous silicone rubber under compression demonstrate that the characteristic stress–strain properties are caused by shifts in the main deformation region in the graded structure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1033–1042