基于变结构理论的中制导律设计方法研究

对于采用复合制导的空地导弹,中末制导交接班问题是影响命中概率的关键因素。针对这一问题,采用变结构理论设计中制导律。首先建立滑模面,保证滑模面上速度矢量与视线重合,且零化视线角速率,然后设计到达函数,使到达条件得到满足,可以保证交班时刻导弹可靠捕获目标,并为末制导提供最优初始条件。建立了导弹六自由度数学模型和目标捕获模型,进行全系统数字仿真,实验结果表明：在中末制导交接时刻,弹目视线与导弹速度矢量基本重合,误差为0.12°,视线角速度为-0.02°/s,在±20°视场下满足捕获需求,并且为末制导提供最优初始条件。该方法可以满足中末制导交接班要求,具有较强鲁棒性,且中制导段弹道平滑,需用过载小。     

Ultraviolet light absorber with low surface energy: synthesis and characterization

Novel fluorine-containing ultraviolet absorbers (FBPs) with low surface energy were successfully synthesized based on 2,4-dihydroxy benzophenone (BP-1), and their structures were characterized by ¹H NMR, ¹³C NMR, FTIR, and HRMS. UV absorption of FBPs was studied in 10⁻⁴ M dichloromethane (CH₂Cl₂), which demonstrated the superior UV absorption capability of FBPs (ca. ?=1.7×10⁴ to 2.2×10⁴ at λ_max) over the matrix (?=1.7×10⁴ at λ_max). Quantum chemistry calculation was performed to investigate the stable structure and UV electronic absorption bands of FBPs. The surface chemistry information of high-chlorinated polyethylene (HCPE) coating films embedded with ultraviolet absorbers (UVAs) was given by X-ray photoelectron spectroscopy (XPS) and contact angle measurement. The results show that the surface enrichment capability of FBPs is remarkably better than traditional UVAs (including BP-1, BP-3, BP-12) because of the low surface energy properties of FBPs.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Self‐Regulation in Flow‐Induced Structure Formation of Polypropylene

Flow‐induced structure formation is investigated with in situ wide‐angle X‐ray diffraction with high acquisition rate (30 Hz) using isotactic polypropylene in a piston‐driven slit flow with high wall shear rates (up to ≈900 s⁻¹). We focus on crystallization within the shear layers that form in the high shear rate regions near the walls. Remarkably, the kinetics of the crystallization process show no dependence on either flow rate or flow time; the crystallization progresses identically regardless. Stronger or longer flows only increase the thickness of the layers. A conceptual model is proposed to explain the phenomenon. Above a certain threshold, the number of shish‐kebabs formed affects the rheology such that further structure formation is halted. The critical amount is reached already within 0.1 s under the current flow conditions. The change in rheology is hypothesized to be a consequence of the “hairy” nature of shish. Our results have large implications for process modelling, since they suggest that for injection molding type flows, crystallization kinetics can be considered independent of deformation history.

     

Contact angle hysteresis

In thermodynamic equilibrium, the contact angle is related by Young's equation to the interfacial energies. Unfortunately, it is practically impossible to measure the equilibrium contact angle. When for example placing a drop on a surface its contact angle can assume any value between the advancing Θ_a and receding Θ_r contact angles, depending on how the drop is placed. Θ_a − Θ_r is called contact angle hysteresis. Contact angle hysteresis is essential for our daily life because it provides friction to drops. Many applications, such as coating, painting, flotation, would not be possible without contact angle hysteresis. Contact angle hysteresis is caused by the nanoscopic structure of the surfaces. Here, we review our current understanding of contact angle hysteresis with a focus on water as the liquid. We describe appropriate methods to measure it, discuss the causes of contact angle hysteresis, and describe the preparation of surfaces with low contact angle hysteresis.     

Recent progress in experiments for sessile droplet wetting on structured surfaces

Wetting of a sessile droplet on structured or patterned surface can be found in a broad range of applications. The researchers have been promoted to keep working on the topic. The review is on the basis of the recent experimental advances on the sessile droplet wetting on the hydrophobic, hydrophilic, or combined hydrophobic and hydrophilic surfaces under isothermal conditions, and on heating or cooling substrates having nonisothermal conditions. More attention has been paid on the wetting configuration between the sessile droplet and the structured substrate; the research gap has been discussed on identifying the three-phase line shape. Further, the three-dimensional measurement for the sessile droplets on the patterned surfaces with focusing more on the contact line of sessile droplets might reveal new physical insights. This review targets at building a holistic overview on the sessile droplet wetting behaviors on the structured substrate in the past 2 years.     

Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

Nanostructured TiO₂ films were deposited onto Indium Tin Oxide (ITO) and glass substrates by dc reactive magnetron sputtering at different substrate inclination angles. The structural and optical properties of the deposited films were studied by X-ray diffraction, scanning electron microscopy and UV–Vis spectrophotometer, respectively. Dye-sensitized solar cells (DSSC) were assembled using these TiO₂ films as photoelectrodes and the effect of the substrate inclination angle in the preparing process of TiO₂ films on the DSSC conversion efficiency was studied.     

光学观测中太阳夹角的分析与计算

对影响光学观测效果的太阳夹角计算方法进行了研究。首先给出了太阳夹角的定义及计算公式。然后重点研究了太阳视位置的计算方法,比较了几种赤纬角计算方法,给出了一种改进的时角计算方法,实现了高精度的太阳视位置计算,并对其计算精度进行了分析。最后提出了在实际光学观测应用中的太阳夹角计算算法。实验表明,太阳视位置计算精度比传统数值近似方法高一个数量级,能够满足光学观测中太阳光照分析的需要。     

相控阵雷达导引头便携测试方法及误差角波动机理分析

相控阵雷达导引头组成复杂、测试指标多、数据量大,通常需要在符合远场条件的微波暗室内测试。本文介绍了一种相控阵雷达导引头便携测试方法及测试系统的组成,分析了便携测试机理、便携屏蔽装置设计原理,解释了该便携测试系统中相控阵雷达导引头角跟踪参数测试时偶尔引起的误差角波动现象。该测试方法简便、快捷、实用、成本低,较好的解决了外场或环境试验中产品测试的需求。本文所述相控阵雷达导引头便携测试方法和相关分析结论有较高的实用价值。     

基于大功率LED扩展光源的均匀光斑光辐射模拟器设计

基于边缘光线原理和光学扩展量守恒思想,结合复合抛物面聚光器和轴对称自由曲面透镜,设计并研制了大功率发光二极管扩展光源的反射/折射准直器.运用Tracepro软件对系统进行光束追迹模拟仿真和实验,研制出均匀光斑的光辐射模拟器.模拟器输出发散角为±12°光束,测量距离出射面50cm处光屏的光斑,在尺寸为14cm×14cm的光照范围内,测得光斑水平方向中心线上的光度均匀度优于4.1%,竖直方向中心线上的光度均匀度优于3.8%.