A computational method for geometric optimization of enhanced heat transfer devices based upon entropy generation minimization

A computational fluid dynamics‐based optimization methodology is developed, appropriate for the geometric optimization of enhanced heat transfer devices based upon the principle of entropy generation minimization, in which the objective function is evaluated from a flow field obtained by computational simulation. A quasi‐Newton optimization procedure is employed, with computation of the objective function gradients based upon a finite difference approach. The optimization procedure is developed to be general with regard to the choice of objective function, the details of the problem under consideration, and the computational methodology employed in solving the fluid flow and heat transfer problems. A novel implementation of a Taylor series‐based procedure for the fast solution of nearby problems is presented, which is found to greatly benefit the efficiency of the present methodology. Finally, a numerical experiment is presented, illustrating the use of the present method in the geometric optimization of a practical enhanced heat transfer device on the basis of the criterion of entropy generation minimization. The optimization of the fin spacing of a simple plate fin heat sink is considered, and a comparison of the computational results with results obtained by analytical optimization based upon empirical friction factor and Nusselt number correlations is given. Copyright © 2012 John Wiley & Sons, Ltd.     

Some effects of foaming of the poly(butylene adipate‐co‐terephthalate) modified by electron radiation

Investigation of the effect of electron radiation and foaming agent on some properties of poly(butylene adipate‐co‐terephthalate) (PBAT) was the aim of the present paper. The mass flow rate, weight‐average molecular weight of irradiated PBAT as well as the morphological structure of foamed samples, their density, tensile strength, and specific strength were determined. It was found that irradiation of PBAT induces growth in weight‐average molecular weight and decrease in mass flow rate, and as a consequence of this increase in viscosity of this polymer. It was also found that foaming of irradiated PBAT causes formation of homogeneous cellular structure or structure with a clear separation of large and small cells. Simultaneously, the irradiated and foamed PBAT shows smaller density than that of non‐irradiated and foamed PBAT. Moreover, electron radiation does not influence tensile strength of the foamed PBAT; however, it increases its specific strength, although only if the content of foaming agent is 1 wt%.     

Effects of multi-Schell beams on orbital angular momentum of entangled signal photons in low-order turbulence aberration channels

We model the detection and crosstalk probability of orbital angular momentum (OAM) states of the entangled signal photon in the Kolmogorov channels of the low-order turbulence aberrations and by the Rytov approximation. The results show that lower OAM mode number of signal photons and larger sub-beam number of multi-Gaussian Schell-model pump beam, the less susceptible of the detection probability of the signal photon to spatial coherence of source and turbulence aberrations is achieved. The maximum crosstalk probability is decrease as the decreasing of the sub-beam number of multi-Gaussian Schell-model. Enlarging OAM difference value or decreasing sub-beam number of multi-Gaussian Schell-model pump beam results in a lower crosstalk probability of the OAM of entangled signal photons.     

线型光束可燃气体探测器的校准

介绍线型光束可燃气体探测器的的校准方法。对线型光束可燃气体探测器的示值误差、报警功能、响应时间、光强衰减性能和抗日光干扰性能等主要计量特性及技术指标进行校准,给出了各主要计量特性的校准条件、试验设备和具体校准方法。对两台线型光束可燃气体探测器进行了校准,其示值误差用相对误差表示分别为–5%和4%,用引用误差表示分别为–4%FS和3%FS。经验证,上述结果均未超出设定指标,响应时间等其它主要计量特性也符合方法要求。该方法校准后的计量特性及技术指标较为合理,校准方法切实可行,可以用于线型光束可燃气体探测器的校准。     

Dispersion and localisation in structured Rayleigh beams

This paper brings a comparative analysis between dynamic models of couple-stress elastic materials and structured Rayleigh beams on a Winkler foundation. Although physical phenomena have different physical origins, the underlying equations appear to be similar, and hence mathematical models have a lot in common. In the present work, our main focus is on the analysis of dispersive waves, band-gaps and localised waveforms in structured Rayleigh beams. The Rayleigh beam theory includes the effects of rotational inertia which are neglected in the Euler–Bernoulli beam theory. This makes the approach applicable to higher frequency regimes. Special attention is given to waves in pre-stressed Rayleigh beams on elastic foundations.     

A combined crossed molecular beam and quasiclassical trajectory study of the Titan-relevant N(2D) + D2O reaction

Following a recent investigation on the N(²D) + H₂O reaction [Homayoon et al., J. Phys. Chem. Lett. 5, 3508 (2014)], we report on an experimental and theoretical study of the isotopologue N(²D) + D₂O reaction. Crossed molecular beam (CMB) experiments were conducted at a collision energy of 10.3 kcal mol^–1. Quasiclassical trajectory calculations were performed on a recent potential energy surface to derive the centre-of-mass functions necessary to simulate the CMB laboratory distributions. Excellent agreement was found. The importance of the channel leading to HON/DON was confirmed. The inclusion of this channel, in addition to that leading to the isomer HNO/DNO, can affect the models considering the coupling between nitrogen and oxygen chemistry in the upper atmosphere of Titan.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

Long‐time behavior of a nonlinear viscoelastic beam equation with past history

This paper is concerned with the existence of a global attractor for the nonlinear viscoelastic beam equation with past history memory where g(u_t) is a damping like | u_t | ^ru_t and f(u) is a source term like | u | ^αu ? | u | ^βu, by considering 0 ≤ β < α and r > 0. Copyright © 2014 John Wiley & Sons, Ltd.     

Investigation of the vibrational modes of ZnO grown by MOCVD on different orientation planes

Wurtzite ZnO thin films were prepared on sapphire substrate by metal organic chemical vapor deposition (MOCVD). Raman scattering studies on different crystallographic textures were performed in the backscattering geometry, and polarization effect is investigated in different configurations and . ZnO Raman modes are investigated in each texture. In the case of ZnO thin film deposed on r‐() sapphire plane and using backscattering geometry, new Raman line was observed at 390 cm⁻¹ because this mode has not been noticed in this geometry. It is shown that the frequencies of the quasi‐phonon modes of the examined thin film are in good agreement with the theoretical values calculated within the framework of Loudon model. Copyright © 2014 John Wiley & Sons, Ltd.