暗中空光束角动量与中性原子的相互作用及其应用

综述了暗中空光束自旋与轨道角动量的一些性质及其与中性原子之间的相互作用,并简单介绍了暗中空光束及其角动量在原子光学和玻色_爱因斯坦凝聚(BEC)以及各种原子光学器件研制方面的应用.     

SHI induced modification in CR-39 polycarbonate by positron annihilation lifetime studies

CR-39 is a polycarbonate widely used as SSNTD for recording nuclear charged particles and in other applications. Latent ion tracks produced in the polymers due to the damage produced by the passage of Swift Heavy Ions contain amorphous material with highest degree of disorder, changing the free volume properties which have strong correlation with the macroscopic properties of the material. Positron annihilation lifetime spectroscopy (PALS) provides direct information about the dimension, content and hole size distribution of free volume in polymers. The effect of irradiation of ⁴⁰Ar (14.9 MeV/n) ions on CR-39 polycarbonate by Positron Annihilation Lifetime Spectroscopy (PALS) is reported here. PALS provides a non-destructive and non-interfering probe, having high detection efficiency for free volume hole properties. From o-Ps lifetime mean free volume hole radius and average free volume of the micro-voids have been calculated. PAL measurement shows an increase in free volume on irradiation.     

应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

Collective bounce-off phenomenon in139La+Ag(Br) reaction at 1.1 A GeV energy

Out of a total statistics of 896¹³⁹La+Ag(Br) interactions, 128 interactions having multiplicity of target fragments (Z⩾1)⩾8 and projectile fragments (Z⩾2)⩾4 have been selected. They correspond to quasi-peripheral interactions. Azimuthal angle correlation between sources of target fragments (TFs) and projectile fragments (PFs) shows the existence of bounce-off effect. Using data of La+Ag(Br) and⁸⁴Kr+Ag(Br) reactions it is shown that individual helium [Z=2, PFs] and heavier fragment [Z⩾3, PFs] show different emission characteristics. Further, a two prong correlation functionT(Φ _ij ) plotted for heavier fragments and helium fragments separately, indicates the possibility of existence of different physical conditions. This observation is supported by the different momentum widths of helium fragments and heavier fragments. From the momentum width data of Kr+Ag(Br) reactions normalized density comes out to be ≈4.7. Using quasi-elastic kinematics for the bounce-off nuclei, the excitation energy has been computed from the experimental data of flow angles. The strength of bounce-off seems to decrease with the increase of excitation energy or temperature.     

利用光热偏转技术实施光学薄膜弱吸收的多波长测量

介绍了光热表面形变光束偏转技术用于测量光学薄膜弱吸收的基本原理,简述多波长吸收测量装置的建立和测试过程,最后给出简单的测量实例.     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

Optical design of a toroidal grating monochromator based beam line on Indus-1

In this paper, we discuss the detailed optical design of a beam line that is under construction on the synchrotron radiation source, Indus-1. Toroidal mirrors are used as pre-and post- focusing elements and a toroidal grating monochromator as a dispersing element. Using three interchangeable gratings, this monochromator will give, at a moderate resolution, a good throughput on the sample in the wavelength range 40 to 1000 Å. Effect of various parameters and their optimization on the resolution and throughput characteristics have been studied by ray tracing calculations, and presented.     

高斯光束照射下的圆盘夫琅禾费衍射

推导了高斯光束照射圆孔或圆盘的衍射场普遍表达式，计算了半波带数接近于零的情况下上述衍射场的数据，进而分析了圆盘衍射场在艾里斑中增加一个暗环的原因。