Measurement of D(d,p) T Reaction Cross Sections in Sm Metal in Low Energy Region (10≤Ed≤20keV)

To study the screening effect of nuclear reactions in metallic environments, the thick target yields, the cross sections and the experimental S(E) factors of the D(d,p)T reaction have been measured on deuterons implanted in Sm metal at 133.2K for beam energies ranging from 10 to 20keV. The thick target yields of protons emitted in the D(d,p) T reaction are measured and compared with those data extrapolated from cross sections and stopping power data at higher energies. The screening potential in Sm metal at 133.2K is deduced tobe 520±56eV. As compared with the value achieved in the gas target, thecalculated screening potential values are much larger. This screening potential cannot be simply interpreted only by the electron screening. Energy dependences of the cross section σ(E) and the experimental S(E) factor for D(d,p)T reaction in Sm metal at 133.2K are obtained, respectively.     

Stimulated Brillouin scattering in magnetized diffusive semiconductor plasmas

Using the hydrodynamical model and following the coupled mode approach, detailed analytical investigation of stimulated Brillouin scattering is performed in an electrostrictive semiconductor. The total induced current density including diffusion current density and the effective Brillouin susceptibility are obtained under off-resonant laser irradiation. The analysis deals with the qualitative behaviour of the Brillouin gain and transmitted intensity with respect to excess doping concentration and magnetic field. Efforts are directed towards optimizing the doping level and magnetic field to achieve maximum Brillouin gain at pump intensities far below the optical damage threshold level. It is found that by immersing a moderately doped semiconductor in a sufficiently strong magnetic field in transverse direction, one can achieve resonant enhancement of Brillouin gain provided the generated acoustic mode lies in the dispersionless regime.     

Qβ measurements of 158, 159Pm , 159, 161Sm , 160-165Eu , 163Gd and 166Tb using a total absorption BGO detector

Q _β values of the neutron-rich isotopes of ^160-165Eu and ¹⁶³Gd were measured for the first time using a total absorption bismuth germanate (BGO) detector, and previously obtained data on ^{158, 159}Pm , ^{159, 161}Sm and ¹⁶⁶Tb were re-analyzed. These radioactive sources were prepared by an on-line mass separator (Tokai-ISOL) following the ²³⁸U (p,f reaction. The deduced Q _β values are the following: 6085(80)keV for ¹⁵⁸Pm , 3805(65)keV for ¹⁵⁹Sm , 5460(140)keV for ¹⁵⁹Pm , 4705(60)keV for ¹⁶⁰Eu , 5065(130)keV for ¹⁶¹Sm , 3705(60)keV for ¹⁶¹Eu , 5575(60)keV for ¹⁶²Eu , 4690(70)keV for ¹⁶³Eu , 3170(70)keV for ¹⁶³Gd , 6430(70)keV for ¹⁶⁴Eu , 5800(120)keV for ¹⁶⁵Eu , and 4695(70)keV for ¹⁶⁶Tb . Moreover, the deduced mass excesses and two-neutron separation energies ( S _2n values) were compared with those of the atomic mass evaluations and theoretical predictions.     

Structural,magnetic and electrical properties of Co1−xZnxFe2O4 synthesized by co-precipitation method

Nanoparticles of Co_1−xZn_xFe₂O₄ with stoichiometric proportion (x) varying from 0.0 to 0.6 were prepared by the chemical co-precipitation method. The samples were sintered at 600 °C for 2 h and were characterized by X-ray diffraction (XRD), low field AC magnetic susceptibility, DC electrical resistivity and dielectric constant measurements. From the analysis of XRD patterns, the nanocrystalline ferrite had been obtained at pH=12.5–13 and reaction time of 45 min. The particle size was calculated from the most intense peak (3 1 1) using the Scherrer formula. The size of precipitated particles lies within the range 12–16 nm, obtained at reaction temperature of 70 °C. The Curie temperature was obtained from AC magnetic susceptibility measurements in the range 77–850 K. It is observed that Curie temperature decreases with the increase of Zn concentration. DC electrical resistivity measurements were carried out by two-probe method from 370 to 580 K. Temperature-dependent DC electrical resistivity decreases with increase in temperature ensuring the semiconductor nature of the samples. DC electrical resistivity results are discussed in terms of polaron hopping model. Activation energy calculated from the DC electrical resistivity versus temperature for all the samples ranges from 0.658 to 0.849 eV. The drift mobility increases by increasing temperature due to decrease in DC electrical resisitivity. The dielectric constants are studied as a function of frequency in the range 100 Hz–1 MHz at room temperature. The dielectric constant decreases with increasing frequency for all the samples and follow the Maxwell–Wagner's interfacial polarization.     

Critical bond lengths and their role in spontaneous magnetostriction of R2Fe17CX (R=Y,Nd, Gd,Tb, Er)

High-energy high-flux synchrotron X-rays have been used to study the spontaneous magnetostriction of R₂Fe₁₇ (R=Y, Nd, Gd, Tb, Er) and their carbides in the temperature range 10–1100 K. Addition of interstitial carbon greatly increases both the Curie temperatures (T_C) and the spontaneous magnetostrain of the compounds, while reduces the anisotropy of the magnetostrain by expanding the distances between rare-earth and neighboring Fe sites. The increase of T_C with carbon is due to the increased spatial separation of the Fe hexagon layers. On the basal plane, the Fe hexagons are squeezed and the contribution of Fe sublattice to spontaneous magnetostriction is attenuated, while that of rare-earth sublattice is enhanced. The average bond magnetostrain around Fe sites are in linear relation with their hyperfine field intensities.     

Multiresolution information measures applied to speech recognition

Considerable advances in automatic speech recognition have been made in the last decades, thanks specially to the use of hidden Markov models. In the field of speech signal analysis, different techniques have been developed. However, deterioration in the performance of the speech recognizers has been observed when they are trained with clean signal and tested with noisy signals. This is still an open problem in this field. Continuous multiresolution entropy has been shown to be robust to additive noise in applications to different physiological signals. In previous works we have included Shannon and Tsallis entropies, and their corresponding divergences, in different speech analysis and recognition systems. In this paper we present an extension of the continuous multiresolution entropy to different divergences and we propose them as new dimensions for the pre-processing stage of a speech recognition system. This approach takes into account information about changes in the dynamics of speech signal at different scales. The methods proposed here are tested with speech signals corrupted with babble and white noise. Their performance is compared with classical mel cepstral parametrization. The results suggest that these continuous multiresolution entropy related measures provide valuable information to the speech recognition system and that they could be considered to be included as an extra component in the pre-processing stage.     

Field emitters with low turn on electric field based on carbon fibers

Field emitters of vertical carbon fibers on a silicon substrate are fabricated by catalytic chemical vapor deposition. After an ageing process of 150 min, field emission measurement of the fibers is carried out in a vacuum chamber with a base pressure of 5.0 × 10⁻⁴ Pa. The experimental results display that field emission performance of the carbon fibers depends strongly on the vacuum level during the experiments. After the field emission measurement, damage to the carbon fiber field emitters is observed from the scanning electron microscopic images.     

Field emission from nano-patterned amorphous carbon

Electron emission from nano-patterned amorphous carbon is realized in this paper. The patterned carbon consists of islands with size of tens of nanometers, and is formed by etching uniform carbon film in oxygen plasma using a bismuth island-like film as the mask. Uniform and stable electron emission is reproducibly obtained, and the emission efficiency is above 2% at an anode voltage of 3 kV. Small carbon particles between large islands are supposed to be necessary for stable electron emission.     

Exchange coupled magnetic nanocomposites of Sm(Co1−xFex)5 / Fe3O4 with core/shell structure

Magnetic nanocomposites of Sm(Co_1−xFe_x)₅/Fe₃O₄ (x≈0.1) with the core/shell type structure were successfully fabricated using a two-step polyol process, where as-prepared SmCo_5(1−x) nanoparticles were used as seeds for the ferrite coating. The core/shell composites are quite stable in air and show a typical hysteric behavior of single component, yielding an enhanced coercivity of 2.2 kOe with a saturated magnetization of 130 emu/g at 5 T. The magnetization data clearly reveal the presence of effective exchange coupling between the hard-magnetic Sm(Co_1−xFe_x)₅ core and soft-magnetic Fe₃O₄ shell, suggestive of a single-phase structure rather than a distinctive two-phase one.     

Inconsistency of the judgment matrix in the AHP method and the decision maker’s knowledge

In this paper, we propose a method for a quantitative estimation of the decision maker’s knowledge in the context of the Analytic Hierarchy Process (AHP) in cases where the judgment matrix is inconsistent. We show that the matrix of deviation from the transitivity condition corresponds to the rate matrix for transaction costs in the financial market. For the quantitative estimation of the decision maker’s professionalism, we apply the Ising model and thermodynamics tools.