圆柱形充液室中4股贴壁燃气射流扩展特性的实验研究

为了探索高温高压周向均布4股贴壁燃气射流在受限空间中的扩展特性,设计了贴壁燃气射流在圆柱形充液室内扩展的实验装置,借助数字高速录像系统,观察了4股贴壁燃气射流在充液室中的扩展过程,发现由Kelvin-Helmholtz不稳定性引起的表面不规则一直存在于整个射流扩展过程;通过处理拍摄记录的射流扩展序列图,获得不同时刻射流扩展的轴向和径向位移; 对比了不同破膜喷射压力和喷孔结构参数对4股贴壁燃气射流扩展过程的影响。实验结果表明:喷孔面积越大,贴壁射流初期轴向扩展速度越大,但由于径向扩展达到交汇的时间较早,湍流掺混和干涉强烈,衰减也越快;破膜喷射压力越高,射流径向扩展到达交汇的时间越短; 破膜喷射压力从12 MPa升高到20 MPa,射流轴向扩展速度大幅增加,气液湍流掺混效应增强。     

应用杆束系统研究水泥砂浆节理面的压剪动特性

基于分离式Hopkinson压杆系统提出一套Hopkinson束杆装置,研究水泥砂浆节理面在压剪复合加载下的动态界面滑移特性。应用三根小杆作为接收杆,分别采用单杆和三杆两种入射方式,对含有节理面的水泥砂浆试件进行冲击加载。在节理面发生滑动时,由三根接收杆测试得到水泥砂浆试件不同位置滑移状态,进而得出节理面的整体滑移速度。此研究初步揭示了节理面在发生滑移时的局部滑移状态以及整体滑移状态,为节理面的动摩擦特性研究提供了较可靠的实验技术。     

石英挠性加速度计温度补偿算法

石英挠性加速度是惯性导航系统核心的惯性器件之一,其输出精度受到温度变化的影响,为了降低温度对石英挠性加速度计精度的影响,在研究石英挠性加速度计数学模型的系数随温度变化规律的基础上,设计了加速度计温度模型辨识试验方法,利用数据拟合方法建立了加速度计温度模型。应用该模型提出了石英挠性加速度温度补偿算法,针对该算法的有效性,进行了实验验证,结果表明应用该温度补偿算法,可使加速度计的测量精度提高一个数量级,补偿效果明显。该温度补偿算法可有效地应用于捷联式惯性导航系统等领域中。     

漂浮运动对风力机气动特性的影响分析Effect of floating foundation motion on the aerodynamic characteristics of the floating offshore wind turbine

海上浮式风机为蕴藏丰富的深海风能开发提供了有效的解决方案,浮式基础存在的大幅度纵荡、纵摇和艏摇运动可以改变风轮与流场间的相互作用,从而影响风力机的气动特性。基于叶素-动量理论及其修正方法,以NREL 5MW风力机为研究对象,考虑浮式基础运动对叶片不同径向位置处相对入流风速的影响,提出了风载荷的计算模型,通过编程计算获得了叶轮转矩和风力机功率,并比较了不同运动形式对风力机功率波动的影响。结果表明,纵摇对其功率特性影响最大,这为海上浮式风机的优化设计提供理论依据与数据基础。     

Experimental nibble for computational chemists: On the construction and CO2 capture by different zeolite imidazole ester framework-8 and ionic

The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO₂) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO₂ capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO₂ absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO₂ capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO₂ capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO₂ capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.     

Construction of inclusions with vanishing generalized polarization tensors by imperfect interfaces

We investigate the problem of planar conductivity inclusion with imperfect interface conditions. We assume that the inclusion is simply connected. The presence of the inclusion causes a perturbation in the incident background field. This perturbation admits a multipole expansion of which coefficients we call as the generalized polarization tensors (GPTs), extending the previous terminology for inclusions with perfect interfaces. We derive explicit matrix expressions for the GPTs in terms of the incident field, material parameters, and geometry of the inclusion. As an application, we construct GPT-vanishing structures of general shape that result in negligible perturbations for all uniform incident fields. The structure consists of a simply connected core with an imperfect interface. We provide numerical examples of GPT-vanishing structures obtained by our proposed scheme.     

Matlab在伏安特性实验中的应用

采用Matlab分别对线性电阻、发光二极管、太阳能电池的伏安特性实验数据进行曲线拟合,为理论分析与实验数据处理提供了方便。     

基于“慕课”的物理类微课程设计探索

“慕课”起步,微课程先行!鉴于目前微课程设计缺乏规范模式,本文旨在对此进行深入探讨．在微课程设计缺乏充分的理论基础支持的前提下,本文首先利用文献综述法归纳得出微课程的基本特征,据此确定微课程设计原则;其次以此原则为指导,借鉴远程开放教育的设计模式,类比探索出微课程设计的基本模式;最后将这种微课程设计模式应用于物理类课程,并结合物理类课程特点进行实证分析,成功实现了物理类微课程设计．教学实践活动进一步检验了本文构建的微课程设计模式切实可行、效果良好．     

机器视觉测量中成像系统光瞳球差对测量影响的研究

光瞳像差的存在会导致实际光瞳和理想近轴光瞳的形状和位置出现差异,从而对光学系统的成像质量产生间接的影响。由于光瞳球差会影响光瞳的位置,而在某些使用机器视觉的测量系统中,入瞳位置作为摄像机的光心,形成了机器视觉中的一种重要参数,当入瞳位置发生变化时,将会影响到测量的准确性,尤其在高精度的测量领域。介绍了光瞳像差的基础理论,以SCOTS(Software Configurable Optical Test System)光学面形测量系统为例,通过计算入瞳球差,分析了光瞳球差对相位测量偏折术测量的影响。结果表明,双高斯物镜中光瞳球差的存在,对测量结果的准确性和精度造成了影响,故在使用机器视觉进行测量的系统中,需考虑光瞳像差带来的影响。     

Preliminary study on CAD-based method of characteristics for neutron transport calculation

Our new method makes use of a CAD-based automatic modeling tool, MCAM, for geometry modeling and ray tracing of particle transport in method of characteristics （MOC）. It was found that it could considerably enhance the capability of MOC to deal with more complicated models for neutron transport calculation. In our study, the diamond-difference scheme was applied to MOC to reduce the spatial discretization errors of the fiat flux approximation. Based on MCAM and MOC, a new 2D MOC code was developed and integrated into the SuperMC system, which is a Super Multi-function Computational system for neutronics and radiation simulation. The numerical results demonstrated the feasibility and effectiveness of the new method for neutron transport calculation in MOC.