用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

束晕-混沌的复杂性理论与控制方法及其应用前景

本文系统论述涉及强流加速器等强流离子束装置中产生的束晕-混沌的复杂性理论与控制方法及其应用前景。强流离子束在核材料生产与增殖、洁净核能、放射性废物嬗变、放射性药物生产、重离子聚变、高能物理、核科学与工程、国防与民用工业和医疗等许多方面都有极其重要的应用潜力和诱人的发展前景。尤其是，近年来强流加速器驱动的放射性洁净核能系统是国内外关注的热门课题，因为它比常规核电更安全、更干净、更便宜。但是，强流离子束形成的束晕-混沌的复杂性现象已引起了国内外广泛关注，需要加以抑制、控制和消除这类现象，解决这一难题已经成为强流离子束应用中的关键问题之一。目前不仅必须深入研究这类束晕-混沌的复杂特性及其产生的物理机制，而且需要研究如何实现对束晕-混沌的有效控制，并寻求和发展其新理论、新方法和新技术。这就向强流离子束物理和非线性-复杂性科学及其技术提出了一系列极富挑战性的新课题。本文结合国内外的研究概况，根据我们多年来的研究成果，特别是我们首创性地提出了一些束晕-混沌的有效控制方法，它们包括：非线性反馈控制法，小波反馈控制法，变结构控制法，延迟反馈控制法，参数自适应控制法等，进行重点的介绍。对上述课题当前的主要进展及相关问题进行系统的总结和比较全面综述的评论。最后，指出该领域今后的研究方向，以推动这个崭新领域的深入研究和应用发展。     

Variational Derivative for Buckling Loads of Beams and Frames

The finite-difference method is a numerical technique for obtaining approximate solutions to differential equations. The main objective of the present study is to give a new aspect to the finite-difference method by using a variational derivative. By applying this formulation, accurate values of the buckling loads of beams and frames with various end supports are obtained. The performance of this formulation is verified by comparison with numerical examples in the literature __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 7, pp. 139–144, July 2005.     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

电子束驱动的回旋激射不稳定性

对弱相对论性电子束驱动的回旋激射(maser)不稳定性的一般理论作了详细讨论.对在获得增长率实用表达式过程中若干解析表达式的推导与细节做了仔细的补充讨论和说明，还增加了增长率的近似表达式，并由此得到了回旋激射不稳定性主要特征的解析分析以及与精确计算的比较，使整个理论有一个完整的描述.侧重解析讨论，也提供了部分一般性的数值计算结果. 关键词： 回旋激射不稳定性 弱相对论性电子束 增长率     

Sorption Behaviour of Molybdenum on Different Antimonates Ion Exchangers

Various antimonate compounds are well known as important inorganic ion exchangers, since they resist radiation and chemical degradation and also exhibit selectivities towards different cations. Ceric, silicon, titanium and ferric antimonates were prepared as inorganic ion exchangers. Characterization of these materials has been described using different techniques, including thermal analysis, surface area measurements, X-ray diffraction and IR-spectroscopy. In batch distribution experiments the influence of HNO₃ molarity and Mo concentration for Mo sorption on different matrices is described in terms of their retention capacities and distribution coefficients.The selectivities of these exchangers towards molybdenum are in the order: CeSb > SiSb > FeSb > TiSb.     

Highlights and Prospects of Hyperspherical Approach in Few-Body Quantum-Mechanical Systems

The binding energy of excitonium negative ion for ground ¹S-state in bulk conductors: Ge, Si, CdSe and for green and yellow lines of Cu₂O in hyperspherical coordinate method are found. Angular and radial correlations between electrons are taken into account by the channel functions, which are the eigen-functions of operator on the surface of sphere in six-dimensional sphere. The calculation of energies have been done using the adiabatic and Born-Oppenheimer approximations. In Born-Oppenheimer approximation is enough to give a binding energy with only 1.2% error, in adiabatic approximation this error drops to 0.7 %.     

类铍离子低激发态等电子系列的能量、精细结构和超精细结构

采用多组态相互作用方法及Rayleigh-Ritz 变分方法，并考虑相对论修正和质量极化效应，获得了类铍离子等电子系列（Z=4-10）低激发态1s²2p2p ¹D^e和1s²2p3p ³P^e的相对论能量。同时还计算了精细结构和超精细结构。计算结果与其他理论和实验符合的很好。     

非晶金刚石膜的性能及其应用

非品金刚石薄膜具有超高硬度等一系列优异的特殊性能，为工程界孜孜追求的材料表面镀膜。用百纳科技公司研发制造的过滤阴极真空电弧离子镀膜机镀制的非晶金刚石薄膜，SP^3金刚石结构量≥80％，硬度高，膜／基结合力高，摩擦系数小，耐磨损，耐腐蚀，透光率高，在电子，机械，光学，生物医学上有广泛应用前景。我们已在视窗玻璃，丝锥，模具，硬质合金刀头等产品上成功应用。     

Cu~+、Ag~+、Au~+与乙硫醇的气相化学反应

利用激光溅射 分子束的技术 ,结合反射飞行时间质谱计 ,研究了Cu+、Ag+、Au+与乙硫醇的气相化学反应。结果显示这三种金属离子与 (CH3 CH2 SH) n 反应形成一系列团簇离子M+(CH3 CH2 SH) n,且团簇离子尺寸不一样。Ag+、Au+与乙硫醇的反应还生成了 (CH3 CH2 SH) +n ,由此推测Cu+、Ag+、Au+与乙硫醇团簇的反应存在两种通道 ,一种通道是生成M+(CH3 CH2 SH) n,另一种是生成 (CH3 CH2 SH) +n 。Cu+、Au+与乙硫醇的反应还生成了M+(H2 S) (M =Cu、Au) ,但是实验中没有观察到Ag+(H2 S) ,理论计算表明Ag+(H2 S)很不稳定。另外 ,分析产物离子M+(CH3 CH2 SH) n 的强度发现 ,n =1～ 2之间存在明显的强度突变现象