脉冲高能量密度等离子体薄膜制备与材料表面改性

脉冲高能量密度等离子体是一项全新的等离子体材料表面处理和薄膜制备技术。文章主要介绍了作者近几年来在这方面的研究成果。从理论和试验上研究了脉冲高能量密度等离子体的产生机制及其物理性质，研究了脉冲等离子体与材料相互作用的基本物理现象和物理机制，诊断测量表明，脉冲等离子体具有电子温度高（10－100eV）、等离子体密度高（10^14-10^16cm^-3）、定向速度高（－10^7cm/s）、功率大（10^4W/cm^2）等特点，在制备薄膜时具有沉积速率高，薄膜与基底粘结力强，并兼有激光表面处理、电子束处理、冲击波轰击、离子注入、溅射、化学气相沉积等综合性特点，可以在室温下合成亚稳态相和其他化合物材料。在此基础上，系统地进行了脉冲等离子体薄膜制备和材料表面改性及其机理的研究，在室温下的不同材料衬底上成功的沉积了性能良好的较大颗粒立方氮化硼、碳氮化钛、氮化钛、类金刚石、氮化铝等薄膜材料，沉积薄膜和基底之间存在一个很宽的过渡层，因此导致薄膜与基底有很强的粘结力，经脉冲等离子体处理过的金属材料表面性能得到了极大改善。     

新型电感储能脉冲功率驱动源

提出了将传统单个储能电感利用传输线分隔成两部分的新型电感储能脉冲功率驱动源技术方案。理论分析表明,利用传输线电容的耦合延时作用,可有效对调制器输出脉冲波形进行整形,并且可以进一步提高能量转换效率,从而克服传统电感储能脉冲功率源输出波形质量差(类三角波波形)的缺点。基于该思想开展了实验研究,获得了电压约300 kV,电流约20 kA的电子束,并成功驱动S波段磁绝缘线振荡器获得了百MW量级的微波输出。     

微波瑞利散射法测定空气电火花激波等离子体射流的时变电子密度

大气压空气电火花激波等离子体射流的电子密度在亚微秒时间尺度上瞬变,其电子密度的测定很难.基于微波瑞利散射原理,本文测量了空气电火花冲击波流注放电等离子体射流的时变电子密度.实验结果表明:测量系统的标定参数A为1.04 × 105 V·Ω·m–2;空气流注放电等离子体射流的电子密度与等离子体射流的半径和长度有关,结合高速放电影像展示的等离子体射流的等效半径和等效长度,测定的电子密度在1020 m–3的量级,且随时间先快速增长至峰值再成指数衰减.此外,本文还探讨了等离子体射流的不同等效尺度对测定结果的影响;分析结果表明,采用时变等效半径和时变等效长度的计算结果最有效,且第1个快速波峰是由光电离的电离波导致的.     

消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。     

放电脉冲重频准分子激光器在不同应用领域的发展现状(英文)

研究了脉冲宽度为25～40 ns的放电脉冲XeCl准分子激光器的工作参数。结果显示,激光器产生的脉冲能量为0.2～0.7 J,重复频率为100 Hz,表明在泵浦功率为2.8～3.3 MW/cm3时,激光器实现了2.6%的激光效率和3.8%的本征效率。     

Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes

Graft polymerization of acrylic acid (AA) onto porous polyethersulfone (PES) membrane surfaces was developed using corona discharge in atmospheric ambience as an activation process followed by polymerization of AA in aqueous solution. The effects of the corona parameters and graft polymerization conditions on grafting yield (GY) of AA were investigated. The grafting of AA on the PES membranes was confirmed by ATR-FTIR and X-ray photoelectron spectroscopy (XPS) analysis. Porosimetry measurements indicate the average pore diameters and porosities of the modified membranes decrease with the increase of the GY. The hydrophilicity and surface wetting properties of the original and modified membranes were evaluated by observing the dynamic changes of water contact angles. It is found that the grafting of AA occurs not only on the membrane surfaces, but also on the pore walls of the cells inside the membrane. The permeability experiments of protein solution reveal that the grafting of PAA endows the modified membranes with enhanced fluxes and anti-fouling properties. The optimized GY of AA is in the range of 150-200 μg/cm². In addition, the tensile experiments show the corona discharge treatment with the power lower than 150 W yields little damage to the mechanical strength of the membranes.     

Matrix-assisted pulsed laser evaporation of polyfluorene thin films

Poly(9,9-dioctylfluorene) (PF8) thin films have been deposited by matrix-assisted pulsed laser evaporation (MAPLE) using a KrF excimer laser. The influence of the laser fluence (50-500 mJ/cm²) and the nature of the solvent (chloroform, toluene, tetrahydrofuran) on the films properties have been studied. The chemical composition of the deposited films was investigated by Fourier transform infrared (FTIR) spectroscopy and compared with the one of spin coated films. To investigate the effect of the deposition parameters on the optical properties of the films, photoluminescence (PL) measurements were performed. Poor structural and optical properties were observed for films deposited starting from chloroform solutions. When using toluene as solvent, the spectra characteristics improved with increasing laser fluence, while wide PL spectra were observed. The characteristic emission bands of the PF8 polymer were nicely detected for films deposited starting from a tetrahydrofuran (THF) solution. Moreover, in this last case, the PF8 structure is preserved at high laser fluences, too.     

Enhancement of soft X-ray emission from a pinch plasma using a rotating plasma for pre-ionization

An experimental study on the enhancement of soft X-ray emission from a pinch plasma has been carried out by using a rotating plasma for pre-ionization. The rotating plasma is produced by a pulsed J×B cross-field discharge between coaxial electrodes, and subjected to a pinch discharge. Under an optimized discharge condition, it has been observed that UV emission of 251.6 nm (Ar III) soft X-ray intensity increases with increasing applied axial magnetic field B. At 400 G, the X-ray intensity is enhanced by a factor of 3 compared to that without the rotating plasma. It is considered that this result is due to the improved characteristics of the pre-ionization rotating plasma, which influences the uniformity and stability of subsequent pinch plasma.     

常压DBD二维流体模型的FCT方法数值模拟

根据常压介质阻挡放电流体模型的物理方程,采用固定网格有限差分算法,分别用四阶和六阶相位误差FCT方法模拟求解二维流体连续方程.在均匀的初始条件下研究放电雪崩过程中电子密度的时空演化,具体分析和比较两种算法的差异.FCT方法模拟求解得出的计算结果与气体放电理论吻合较好,是一种具有较好的准确性和高精度的算法.     

Synthesis of tungsten carbide nanopowder via submerged discharge method

Tungsten carbide nanopowder was prepared via pulsed discharge of bulk tungsten and graphite rods immersed in pure ethanol. The effect of discharge parameters on the characteristics of final products was investigated. Structural and morphological characterization of nanopowder was performed by means of X-ray diffraction analysis and transmission electron microscopy. In order to determine the feasibility of using synthesized material as an electrocatalyst, tungsten carbide nanopowder was tested for hydrogen evolution. A correlation was found between morphology of nanoparticles, their phase composition and electrocatalytic activity.