Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

静磁场中的互作用能

讨论了在激发磁场的电流保持不变时和束缚磁荷作为磁场的不变时，两种情况下磁场的相互作用能。结果与静电场类似，两种情况的互作用能中都含有相互磁化，致使物体磁化状态改变作的功。     

Possible triggering of solar activity to big earthquakes (Ms ≥ 8) in faults with near west-east strike in China

A big earthquake (Ms = 8.1) occurred at western Kunlun Mts gap on November 14, 2001. It is the biggest earthquake in China in the past 50 years and the only one with a magnitude bigger than 8 in China after Dangxiong Earthquake (M = 8) in Tibet in 1951. The big earthquake has drawn wide attention of scientists in seismological, geophysical, geological and astro-geodynamic circles. Scientists are interested in the occurrence regularity of the very big earthquakes and try to find out the fac…     

利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

磁光玻璃光纤的偏振特性及其在全光纤电流传感器中的应用

在磁光玻璃裸光纤偏振特性研究的基础上，研制磁光玻璃光纤，偏振特性及其在全光纤电流传感器中的应用。将采用模管法拉制成的磁光玻璃光纤置于亥姆霍兹线圈产生的磁场中，当线偏振光通过该光纤时，其偏振面旋转一定角度，把该角度转换成光信号的强度，然后再用仪器进行检测。通过对线偏振光偏振面在磁场中的偏振特性的测试与实验，提出用磁光玻璃光纤构成的全光纤电流传感器，可用于电流和磁场测试。     

准一维电子通道中声电电流的理论计算

表面声波在GaAs/Al _x Ga_1-x As异质结表面上沿由分裂门产生的准一维电子通道方向传 播时，在通道中诱导产生声电电流.采用WKB近似，计算了只有一个电子被量子阱俘获时的声电电流；并在此基础上，详细讨论了表面声波的频率和功率，以及门电压和源漏偏压对声电电流的影响. 关键词： 表面声波 准一维电子通道 量子阱 声电电流     

On the effect of a longitudinal magnetic field on oscillatory characteristics of a subnormal region in discharge in argon

Oscillating nature of current pulses under d.c. excitation in subnormal region with longitudinal magnetic field at pressure range 0.20 torr to 0.85 torr have been studied. The frequency, bandwidth, peak-peak voltage, cut-off current and rise time of the current pulses have been observed with pressure, average tube current and magnetic field. A study of these oscillograms in magnetic field, average tube current and pressure are presented. The probable mechanism for the generation of oscillation based on space-charge field modification with magnetic field is discussed     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。