Unusual current‐voltage characteristics of single crystalline and bicrystalline La0.7Ca0.3MnO3 films

The current‐voltage characteristics of single crystalline and bicrystalline La_0.7Ca_0.3MnO₃ films were measured and analyzed. Several epitaxial films, as well as 45° [001]‐tilt grain boundaries, display current‐voltage characteristics which are asymmetric with respect to polarity reversal of the bias current. One epitaxial film has a polarity dependent resistance of ～340kΩ and of ～670kΩ in forward and in reverse direction, respectively.     

多束速调管的增益带宽

 研究了M个束、N个共振腔的多束速调管(MBK)的增益和带宽，得到了描述小信号增益和带宽与器件结构参数和电子束参数关系的公式，给出了在不同参数下增益随频率的变化曲线。分析了多腔对增益，多束对带宽的影响。计算结果表明：多腔可以提高增益；多束可以降低Q值，从而可以增中带宽，带宽增加工了3.6%，还可以提高增益；对于MBK，频率交叉调谐对增加带宽不如频率调谐好；空间电荷波只对增益有影响，对带宽没有影响。最后，预估一种L带多束速调管的增益带宽为8.1%。     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

数字全息技术的原理和应用

数字全息是随着现代计算机和CCD技术发展而产生的一种新的全息成像技术．文章主要介绍数字全息技术的基本原理，数字全息重建中的主要方法以及数字全息技术以其独特的优点在各个领域中的应用．     

Effect of a Shock Pulse on a Floating Ice Sheet

The vibrations of a viscoelastic plate lying on an elastic liquid base subjected to pulse loading have been studied theoretically and experimentally. The effect of the variable depth of the reservoir, plate thickness, and strain relaxation time on the value of the plate vibration amplitude and the length and curvature of the flexural gravity wave profile are analyzed. Good agreement of theoretical and experimental results is obtained.     

A simple model for high fluence ultra-short pulsed laser metal ablation

The ultra-short laser metal ablation is a very complex process, the complete simulation of which requires applications of complicated hydrodynamics or molecular dynamics models, which, however, are often time-consuming and difficult to apply. For many practical applications, where the laser ablation depth is the main concern, a simplified model that is easy to apply but at the same time can also provide reasonably accurate predictions of ablation depth is very desirable. Such a model has been developed and presented in this paper, which has been found to be applicable for laser pulse duration up to 10 ps based on comparisons of model predictions with experimental measurements.     

托卡马克能量约束及自举电流效应的初步考虑

基于Lee等人的离子温度梯度模导致的反常热能输运系数,本文研究了辅助加热托卡马克等离子体的能量约束行为,并对自举电流的效应作了初步考虑。结果表明,计算得到的能量约束时间随等离子体电流I_p和托卡马克大半径R增大而增长,随注入功率P_t、环向场B_t以及等离子体小半径α的增大而缩短。这些结果与Kaye-Goldston的经验约束定标具有相同的趋势。自举电流的存在总是导致能量约束时间的增加,当自举电流与总电流的比值γ较小时,能量约束时间的增加率约为γ/2。此外,自举电流将造成锯齿反转半径的减小。     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

The VC dimension of k‐uniform random hypergraphs

A set of vertices is shattered in a hypergraph if any of its subsets is obtained as the intersection of an edge with the set. The VC dimension is the size of the largest shattered subset. Under the binomial model of k‐uniform random hypergraphs, the threshold function for the VC dimension to be larger than a given integer is obtained. The same is done for the testing dimension, which is the largest integer d such that all sets of cardinality d are shattered. © 2006 Wiley Periodicals, Inc. Random Struct. Alg., 2007     

A competitive algorithm in searching for many edges in a hypergraph

We give a competitive algorithm to identify all d defective edges in a hypergraph with d unknown. Damaschke did the d=1 case for 2-graphs, Triesch extended the d=1 case to r-graphs, and Johann did the general d case for 2-graphs. So ours is the first attempt to solve the searching for defective edges problem in its full generality. Further, all the above three papers assumed d known. We give a competitive algorithm where d is unknown.