钢板-混凝土组合加固钢筋混凝土梁的非线性有限元分析

以10根采用钢板-混凝土组合加固技术加固的钢筋混凝土梁的试验为基础,建立了钢板-混凝土组合加固钢筋混凝土梁的非线性有限元模型.沿用了钢板-混凝土组合梁有限元分析中栓钉的荷载-滑移曲线及断裂模型,提出了新老混凝土界面的剪切-滑移模型,可以较好地模拟界面受力性能.采用有限元软件ABAQUS,模拟了一次加固、不同损伤加固及持载加固等加载情况下加固构件受力全过程和受弯破坏以及新老混凝土剥离破坏等破坏形态下加固试件的受力性能.在验证了有限元模型的准确性后,分析了钢板厚度、加固部分高度及长度等参数对加固构件承载能力及刚度的影响.最后提出了几点对钢板-混凝土组合加固RC梁的设计建议.     

A direct relationship between bending waves and transition conditions of floating plates

Ocean waves travel deep into ice fields in the polar regions, both affecting the formation of sea-ice and causing its break-up. Recently, it has been shown that a relatively simple linear water and bending wave theory can predict the decay rate of the wave energy travelling through fractured ice sheets and floes at the geophysically important wave periods of 6–15 s. That work used simple free-edge conditions. A possible improvement to the current model is to better represent the effective connection due to partially frozen cracks that occur in practice. The Wiener–Hopf technique gives explicit formulae for the velocity potential and surface deflection, expressed as series expansions over the modes of the elastic plate floating on water of finite depth, with the coefficients in the expansion given as functions of four constants. These constants are determined by a system of four linear equations, represented by a 4-by-4 matrix and a four-element vector. The elements of the matrix are given as explicit functions of relationship between edge conditions. General connections between ice sheets may be interpreted as a vertical and a rotational spring providing transition conditions for the shear force and the bending moment. The reflection and the transmission of waves can then be simply calculated as direct functions of the connection conditions. Conversely, reflected and transmitted waves allow complete characterization of the effective connection conditions at a material discontinuity.     

System of set-valued mixed quasi-variational-like inclusionsinvolving H-η-monotone operators in Banach spaces

A new system of the set-valued mixed quasi-variational-like inclusions （SSMQVLI） involving H-η-monotone operators is studied in general Banach spaces without uniform smoothness. By using the resolvent operator technique of H-η-monotone operators, a new iterative algorithm for finding approximate solutions to SSMQVLI is proposed. It is shown that the iterative sequences generated by the algorithm converge strongly to the exact solution of SSMQVLI under appropriate assumptions. These obtained new results have extended and improved previous results.     

应用数字散斑相关技术研究缺口根部高温疲劳变形

应用数字散斑相关技术研究了耐热合金试件在450°环境中缺口根部的弹塑性变形及其与疲劳循环次数的相关性。疲劳试验在单边带缺口的拉伸板状试件上进行。试件由耐热合金GH4169材料制成,试件表面预先通过离子溅射法制作了离散的金粒散斑图。试验采用逐级循环加载和疲劳循环加载交替的方式进行。首先进行逐级循环加载,将最大载荷Pmax平均分成8级,由0逐级加载至最大载荷,再由最大载荷逐级卸载至0;同时由图像系统半自动地、连续同步地采集系列散斑图。然后按0→Pmax→0加载方式,连续进行250次疲劳循环加载。逐级循环加载和疲劳循环加载不断交替,直至疲劳断裂。利用数字散斑相关技术计算出缺口根部的弹塑性应变,进而求出缺口根部应变、名义迟滞回线面积及斜率与疲劳循环次擞的相关性。试验结果对于耐热合金材料的疲劳寿命研究很有意义。     

光纤位移干涉仪在爆轰加载飞片速度测量中的应用

利用光学多普勒效应和外差方法搭建了一台光纤位移干涉仪。装置采用光通信行业中已经发展成熟的器件,主要由带尾纤的半导体激光器、三端口环形器、光纤探头、宽带探测器以及宽带高采样率示波器等构成。整个装置结构简单,价格便宜,采用了信号光和参考光同轴结构,实现了任意反射面的速度测量,克服了偏振模式色散的影响,能够实现长量程测量,量程达到20 mm。利用该装置进行了爆轰加载下飞片速度测量,测量最高速度达到1 300 m/s,工作距离达到20 mm,同时利用VISAR对飞片速度进行了对比测量,结果表明用两种不同方法所测得的速度曲线吻合很好。     

Conjugated turbulent heat transfer with axial conduction in wall and convection boundary conditions in a parallel-plate channel

The steady-state conjugated turbulent heat transfer with axial conduction in the wall and convection boundary conditions is solved with the generalized integral transform technique for the flow of Newtonian fluid in parallel-plate duct. A lumped wall model that neglects transverse temperature gradients in the solid but that takes into account the axial heat conduction along the wall is adopted. Highly accurate results are presented for the fluid bulk and wall temperatures and Nusselt number. The effects of the conjugation parameter, Biot number, and the dimensionless channel length on Nusselt number and fluid bulk and wall temperatures are systematically investigated.     

云纹干涉制栅新技术

本文介绍了两种新的光栅复制技术,它们具有快速、高质量、低成本、操作简单、使用方便、不需特殊仪器等特点.该技术从我国一般力学实验室条件出发,解决了试件栅制作困难,其中漆栅方法可极大地缩短云纹干涉方法的实验周期,该技术也为光栅测试技术的广泛应用提供了方便.     

转动盘一片系的循环对称模综

本文考察在任意恒定转速下叶片/轮盘系的固有模态分析,计及叶片预扭所引起的大变形效应.把群论算法用于子结构技术,通过联立迭代求出叶片/轮盘系在离心场中的平衡位置和应力分布,进而确定初应力刚度矩阵、大变形刚度矩阵,以及相应的动频模态.由于本方法考虑了叶片大变形的影响,且可消去子结构间的全体内连自由度。从而在确保精度的前提下,显著地压缩了计算的规模.实践证明本文提出的子结构联立迭代法有很好的收敛性,它使计算量有巨大的节省.     

关于湍流拟序结构的思考

本文在简要地回顾了30多年来湍流拟序结构研究的进展之后,评述了目前拟序结构研究的动态。笔者强调准确的湍流场数据库建立的重要性,它是定量描述和研究拟序结构的基础。笔者评述了关于拟序结构目前流行的几种观点和方法,认为应当把研究拟序结构的动力学作为我们研究的目标。笔者深信准确掌握拟序结构的动力学规律,对于预测和控制湍流将有极大的推动。      

容量矩阵法在涡方法中的应用

本文将容量矩阵技术与快速Fourier变换相结合求解非矩形域的Poisson方程,再与格子涡方法相结合,发展了一套求解复杂外形的快速涡方法。作为算例,计算了有厚度平板和楔形体的分离流动,得到了满意的结果。特别是在垂直平板绕流中,模拟出了由于剪切层不稳定性引起的小涡结构。