非等强度,等脉冲相关技术测量甲酚紫染料的吸收恢复时间

利用非等强度、等脉冲相关技术测量甲酚紫染料吸收恢复时间。实验结果给出了甲酚紫染料吸收恢复时间为158ps。     

甲酚紫非线性光学性质的研究

报道了甲酚紫染料的非线性光学性质的实验研究方法及其结果.利用简并四波混频技术,测量得到甲酚紫甲醇溶液(浓度为5×10~(-4)M)的三阶非线性极化率X~(3)为2.0×10~(-10)esu.此外,利用不同强度皮秒脉冲相关技术得到了甲酚紫甲醇溶液的吸收恢复时间τ_(21)为163ps.     

Thermal wave photopyroelectric characterization of advanced materials: State of the art

This article reviews the history, background, theoretical basis, development, attempts to optimize, and experimental performance of the photopyroelectric technique for the optothermal characterization of advanced materials such as semiconductors, superconductors, pure metals and alloys, quantum wells, liquid crystals, paramagnetic and ferromagnetic materials, as well as solar cells. The state of the art in the experimental processes in this field is also reviewed. This new photothermal technique can be used after a careful optimization, as a highly sensitive method for photopyroelectric spectroscopy and general thermal wave measurements. It has been shown to be a highly sensitive spectroscopic method for the nondestructive evaluation of advanced materials. This review presents the main photopyroelectric theoretical models that have been used for the extraction of some important optoelectronic properties such as the optical absorption coefficient and the nonradiative quantum efficiency spectra, as well as some thermal properties such as the thermal diffusivity, thermal conductivity, and specific heat. The applicability of the general basic theoretical model with its many special cases is also described in detail. This review demonstrates how photopyroelectric spectroscopy can be complementary to the conventional spectroscopic methods. The different experimental modes of the technique are also discussed. Moreover, some ideas concerning future perspectives of applying the technique to other scientific fields are outlined. This article does not aspire to an in-depth analysis of the experimental results in the field; rather, it focuses on the technique itself.     

江西省社会发展评价指标体系的建构及对各地市的评价

本文介绍了由本省省情构建的一套江西省社会发展评价指标体系,并用系统工程和计算机技术对全省11地市1988至1990年三年间的社会发展进行综合评述。     

张量积型Said-Ball曲面的预处理渐近迭代逼近法

为加快张量积型Said-Ball曲面渐近迭代逼近法的收敛速度,探讨了张量积型Said-Ball曲面渐近迭代逼近法的预处理技术。首先利用对角补偿约化技术构造了预处理子,然后结合矩阵Kronecker积性质,采取预处理渐近迭代逼近法求解张量积型Said-Ball曲面。为进一步降低计算量并提高算法的稳定性,利用广义极小残差法求解预处理方程,得到预处理渐近迭代逼近法的非精确求解方法。分析了预处理渐近迭代逼近法及非精确求解方法的收敛性。最后用数值实例说明预处理子能大大减小迭代矩阵的谱半径,令预处理技术及其非精确求解方法的计算效率明显提高。此外,由于对角补偿预处理子能改善配置矩阵的谱分布,因此也可用于对广义极小残差法的预处理,以改善其收敛性。     

一种标定新方法在FTIR定量分析中的应用

利用傅里叶变换红外(FTIR)光谱技术可以对气体组分的浓度进行连续的在线定量分析。在定量分析过程中,对FTIR进行标定是非常重要的环节之一,直接关系到定量分析是否可以进行和定量分析的精度。本文提出了一种新的标定方法(称之为“积分法”),以CO、HCI和水蒸气为例完成的实验结果表明：这一方法与传统方法(标气法)相比具有许多优点,准确性和稳定性都很好;尤为重要的是,对于传统方法无法解决的常温下为液态的气体物质的标定问题,利用这一新方法可以迎刃而解,而且有很好的精度。     

从电动力学到量子电动力学：纳米光电子器件

纳米尺度下的光电器件的研制与米、毫米、微米尺度下电子器件或光学器件的研制在基本原理与制造技术上有本质的不同。必须采用量子电动力学和介观物理作为基本原理。在量子电动力学中,光子与电子可以相互转化,光子也可以储存在“空腔”中。光一电转换或光一电一光的转换甚至可以在远小于一个光波的尺度内实现（如100nm以下）。基于大量最新现象发现的启示与推动,产生了一种全新的光予技术：纳米光子技术。在这种全新的纳光子技术中,人们将光子电子的输运与转化联合起来进行考虑,非线性光学获得了长足的发展。微电子技术和概念被大量地推广应用于纳光子技术开发。创新型元件如集成激光器、30dB光放大器、效率为30％的1．55μm滤波器等层出不穷地涌现。纳米技术的研发为信息储存、输运和处理开辟了新的天地。进入21世纪,纳米光子技术研究日新月异。在摩尔经验规律的指导下,不断发展的微电子工业的制造精度已进入100nm领域。大规模应用纳米电子、纳米光子技术的时代已经来临。一些新型的光通讯线路已开始应用纳米光子器件。对公众而言,用于照明的LED只是一个应用实例。报告将结合法国国家纳米研究平台的研发成果来阐述纳米光子学的原理和纳米光子器件发展的趋势。     

GPS/LEO掩星正则变换反演方法

利用无线电全息方法, 如正则变换方法或全谱反演方法, 可以有效地解决大气多路径条件下GPS掩星信号的反演问题. 本文采用正则变换方法反演掩星资料, 模拟仿真反演结果显示正则变换方法可以准确地反演包含大气多路径效应的信号. 在模拟信号的相位中加入不同程度的高斯相位噪声后, 正则变换方法的反演结果会受到不同程度的影响. 用正则变换方法对2007年第71天至73天共约4500个COSMIC数据进行处理. 将其折射率反演结果和atmPrf资料 (利用全谱反演方法计算得到) 一起, 与对应的ECMWF 分析场资料进行统计比较, 结果表明: 在5 km以下, 正则变换方法计算的折射率的相对误差的平均值普遍大于atmPrf资料. 其原因可能为: 正则变换方法将信号从LEO轨迹后传播至辅助屏, 造成孔径缩小, 精度下降. 同时也讨论了信号截断对低对流层中反演精度和掩星个数的影响. 关键词： 无线电掩星 大气多路径 多相位屏技术 正则变换方法     

Effect of Surfactant Type and Concentration on Surfactant Migration,Surface Tension,and Adhesion of Latex Films

The effect of surfactant type and concentration on the migration behavior of surfactant in a latex film was investigated. Two types of surfactant, including an anionic (sodium lauryl sulfate, SLS) and a non-ionic (nonylphenol ethoxylate, average number of ethylene oxide units = 40, NP-40) surfactant, were used in an emulsion polymerization of methyl methacrylate butyl acrylate copolymer (MMA–BA). The total amount of surfactant was varied in three levels, i.e., 1.5, 3, and 4.5 wt%, and the surfactants were used both pure and in a mixture state. The surfactant migration to the film–air (F–A) and film–substrate (F–S) interfaces of the latex films was determined by using an attenuated total reflection-Fourier transform infrared (ATR-FTIR) method. In addition, the adhesion of the latex films to glass substrates was measured by a pull-off test. The results showed that the migration of anionic surfactant to the interfaces was greater than the non-ionic one. It was also found that the use of non-ionic surfactant along with anionic surfactant could decrease the migration of the anionic surfactant to the interfaces.     

Ti扩散铌酸锂光波导特性的热固定技术

在Ti扩散铌酸锂光波导中,因光致折变效应而导致光波导特性漂移.在光波相干性的导波光学器件中,光致折变效应的影响尤为严重.本文报道了稳定光致折变效应的热固定技术实验结果;并提出在光波导特性的热固定过程中,不是H~+离子起主导作用这一看法.