Synthesis,structure and dielectric properties of a novel Gd coordination polymer based on 2-（ pyridin-4-yl ）- 1H-i midazole-4,B -dicarboxylate

A new Gd coordination polymer based on 2-（pyridin-4-yl）-I H-imidazole-4,5-dicarboxylate （H3PIDC） has been synthesized under hydrothermal conditions, formulated as {[Gd3（HPIDC）3（PIDC）（H2O）4].3H2O}n （1）. The compound crystallizes in the monoclinic system, space group C2/c with a=20.951（7）, b = 9.515（3）, c = 27.483（10） A,β= 106.176（6）°, Z = 4, V= 5262（3） A3, C40 H45 Gd3 N12 O30, Dc = 2.071 g/cm3, Mr=1645.63, λ （MoKa）=0.71073A, μ=3.846mm-1, F（000）=3204, the final R=0.0390 and wR= 0.1332. Complex 1 is a two-dimensional MOF built up from T-shaped 3-connected HPIDC2 , PIDC3 and 4-connected metal nodes. Dielectric constant of complex 1 was measured at different frequencies with temperature variation.     

卤代化合物的碳—13化学位移模拟

用人工神经网络和多元回归方法对含２个碳的２１个卤代化合物的３５个化学位移进行计算机图像模拟，结果表明，人工神经网络方法优于多元回归方法，同时此种方法处理这类问题有明显的优势，波谱模拟技术在有机化合物结构解析中是非常有用的方法。     

人工神经网络法用于高效毛细管电泳分离条件优化的研究

把人工神经网络（ＡＮＮ）法应用于高效毛细管电泳（ＨＰＣＥ）分离条件的优化，给出了反向传播（ＢＰ）的ＡＮＮ模型的具体算法。用正交试验法同时考察了缓冲溶液组成、浓度、ｐＨ值和有机添加剂浓度等实验因素对ＨＰＣＥ分离合成色素和防腐剂的影响，采用误差反向传播方法建立了有效的ＡＮＮ预测模型，预测最佳分离条件，获得了满意的分离结果。     

互穿网络型二阶非线性光学极化聚合物

报导了二阶非线性光学材料含对硝基苯偶氮苯烷基胺发色基团的聚氨酯和聚丙烯酸酯的互窗网络聚合物的合成和极化工艺，考察了微观形态，用电致色变法测定了其极化膜发色基团的取向度及取向的热稳定性，其二阶非线性光学系数ｘ＾（２）可达１０＾－７ｅｓｕ量级。该互穿网络聚合物极化膜有良好的光学性质和优异的热稳定性，在１２０℃温度下序参数可长期保持稳定。     

Theoretical studies on microscopic and macroscopic nonuniformities in electric-discharge-excited XeCl lasers

The satbilit r of the pumping discharge for XeCI (Ne/Xe/HCI) lasers is investigated by using different one-dimensional models, considering both bulk discharge instabilities and filamentary ones. It is found that the bulk stability in a XeCl laser discharge can he improved, under certain conditions, due to the vihrational excitation of HCl molecules: this effect is studied by using different models for the HCl vihrational kinetics. It is established that the very short instability time found in experiments cannot he explained as a result of hulk instability of the discharge. On the other hand, a satisfactory comparison with experiments can he obtained by adding to the model a simplified microinstability which develops in the discharge.     

The influence of the amount of hardener on the tensile mechanical behavior of an epoxy system

The tensile mechanical behavior of an epoxy/amine system, with varying amounts of hardener, was evaluated. The results showed that a brittle to ductile transition occurs as the amount of hardener is increased. This behavior was associated with the change in the number of molecular segments that present mobility in the macromolecular network. The epoxy-rich formulations are brittle due to the total consumption of the functional groups on the hardener molecule. On the other hand, the amine-rich formulations showed a fracture behavior characteristic of materials with large deformation capacity. This behavior was associated with the presence of unreacted points on the hardener molecule which introduce a new mobile molecular segment in the macromolecular network formed. © 1998 John Wiley & Sons, Ltd.     

集成滤波器在谱图信号除噪中的应用

本文提出了一种由神经元网络与线性自适应滤波器组成的集成滤波器的实现方法，用于谱图信号除噪处理。     

应用改良BP网络于多组分药物定量分析

ＢＰ网络自身学习速度慢的缺点，影响了其在多组分同时定量分析中的应用，为此，本文从误差函数、传递函数和网络参数等方面应用Ｆａｈｌｌｍａｎ和Ｃａｔｅｒ等所提修改方案改了Ｂ Ｐ网络，并将其应用于甲硝唑、先锋霉素、氯纱和氨卞四组分混合药物的同时定量分析，实验证明，在不损害网络预测精度的前提下，学习速度有了较大的提高。     

Novel polyisobutylene/poly(dimethylsiloxane) bicomponent networks. I. Synthesis and characterization

The synthesis of novel polyisobutylene (PIB)/poly(dimethylsiloxane) (PDMS) bicomponent networks is described. The synthesis strategy (see Figure 1) was to prepare well-defined and -characterized allyl-tritelechelic polyisobutylenes [ϕ(PIB—C—C=C)₃] and SiH-ditelechelic poly(dimethylsiloxanes) (HSi–PDMS–SiH) and then crosslink these moieties by hydrosilation. The ϕ(PIB—C—C=C)₃ was prepared by living isobutylene polymerization followed by end-quenching with allyltrimethylsilane, whereas the HSi–PDMS–SiH was obtained by equilibrium polymerization of octamethylcyclotetrasiloxane and tetramethyldisiloxane. The detailed structures of the starting polymers were characterized by GPC and ¹H-NMR spectroscopy. A series of PIB/PDMS bicomponent networks of varying compositions and average molecular weights between crosslinks (M _c) of ∼ 20,000 g/mol were assembled. Optimum crosslinking conditions were defined in terms of H₂PtCl₆ catalyst concentration, nature of solvent, time, temperature, and stoichiometry of ∼ CH₂CH=CH₂/∼SiH groups, allowing for the convenient synthesis of well-defined model bicomponent networks. Swelling studies and elemental analysis confirm the correctness of the synthetic strategy. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1891–1899, 1998