光参量啁啾脉冲放大增益特性研究

 通过对非线性三波耦合方程组进行数值求解，研究了光参量放大的增益特性及饱和放大特性。给出了泵浦光、信号光参数对参量增益的影响及其与晶体饱和长度的关系。且OPA具有传统CPA系统所不具有的优点，将有可能取代传统的CPA系统而作为超短超强激光系统的新型前端。     

Chip-calorimeter for small samples

A method for measuring heat capacities of small samples using a chip-calorimeter and a heat pulse technique is described. The theoretical background to calculate the heat transport properties and the heat capacity of the sample from the pulse response function is given. Problems and potentials of the method are discussed. An example is given.     

On the limit cycles of a quintic planar vector field

This paper concerns the number and distributions of limit cycles in a Z_2-equivariant quintic planar vector field.25 limit cycles are found in this special planar polynomial system and four different configurations of these limit cycles are also given by using the methods of the bifurcation theory and the qualitative analysis of the differential equation.It can be concluded that H(5)≥25=5~2, where H(5)is the Hilbert number for quintic polynomial systems.The results obtained are useful to study the weakened 16th Hilbert problem.     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

群色散光纤中高强度光脉冲传输与压缩的研究

考虑非线性四阶折射率,推导了光脉冲在群色散单模光纤中传输的非线性方程,并得到孤子型解析解.同时指出在Sech型光纤脉冲压缩实验中,光强度的阈值.     

单模光纤中皮秒啁啾脉冲压缩

对单模光纤正群速色散区秒啁啾脉冲的非线性传进行了近似的解析分析和定量的数值计算。结果表明，负啁啾脉冲在传输过程中能得到有效压缩。压缩比与脉冲初始峰值功率和初始啁啾程度有关。初始峰值功率一定的脉冲，其压缩比随初始啁啾程度的增大面大，初始啁啾程度一定的脉冲，压缩比随初始峰值功率的增大而减小，表明自相位调制效应导致脉冲压缩效果变差。计算结果还表明，在脉冲时域宽度得到压缩的同时，光谱宽度也能得到同步压缩。     

利用CARS方法研究超短脉冲激光的脉冲宽度

在理论上提出了利用两光束CARS/CSRS方法测量超短脉冲激光的三阶相关函数。实验上在几种样品中测量了CARS/CSRS的时间特性,得到了泵浦光脉冲,SCDL输出光脉冲以及受激喇曼散射光脉冲的宽度。     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

The construction of infinite families of any k-tight optimal and singular k-tight optimal directed double loop networks

The double loop network(DLN)is a circulant digraph with n nodes and outdegree 2.It is an important topological structure of computer interconnection networks and has been widely used in the designing of local area networks and distributed systems.Given the number n of nodes,how to construct a DLN which has minimum diameter?This problem has attracted great attention.A related and longtime unsolved problem is:for any given non-negative integer k,is there an infinite family of k-tight optimal DLN?In this paper,two main results are obtained:(1)for any k≥0,the infinite families of k-tight optimal DLN can be constructed,where the number n(k,e,c)of their nodes is a polynomial of degree 2 in e with integral coefficients containing a parameter c.(2)for any k≥0, an infinite family of singular k-tight optimal DLN can be constructed.     

Capacity augmentation of a supply chain for a short lifecycle product: A system dynamics framework

For an innovative product characterized by short product lifecycle and high demand uncertainty, investment in capacity buildup has to be done cautiously. Otherwise either the product’s market diffusion is impeded or the manufacturer is left with unutilized capacity. Using the right information for making capacity augmentation decisions is critical in facing this challenge. In this paper, we propose a method for identifying critical information flows using the system dynamics model of a two-echelon supply chain. The fundamental premise of system dynamics methodology is that (system) structure determines (its) behavior. Using loop dominance analysis method we study the feedback loop structure of the supply chain system. The outcome is a set of dominant loops that determine the dynamics of capacity growth. It is revealed that the delivery delay information has little effect while the loop that connects retail sales with production order affects the dynamics significantly. Modifying this loop yields appropriate capacity augmentation decisions resulting in higher performance. What-if analyses bring out effects of modifying other structural elements. In conclusion, we claim that the information feedback based methodology is general enough to be useful in designing decision support systems for capacity augmentation. The limitations of the model are also discussed and possible extensions identified.