温差电现象的进一步讨论

一般认为温差电动势与温差及导体的材料有关，与温度梯度无关。本文通过实验和理论两个方面证明了温差电动势与温度梯度也有关系。     

A Uniqueness Result for a Model for Mixtures in the Absence of External Forces and Interaction Momentum

We consider a continuum model describing steady flows of a miscible mixture of two fluids. The densities ϱ _i of the fluids and their velocity fields u ⁽ⁱ⁾ are prescribed at infinity: ϱ _i |_∞ = ϱ _i∞ > 0, u ⁽ⁱ⁾|∞ = 0. Neglecting the convective terms, we have proved earlier that weak solutions to such a reduced system exist. Here we establish a uniqueness type result: in the absence of the external forces and interaction terms, there is only one such solution, namely ϱ _i ≡ ϱ _i∞, u ⁽ⁱ⁾ ≡ 0, i = 1, 2. This work was supported by the SFB 611 at the University of Bonn and the European HYKE network (contract no. HPRN-CT-2002-00282). The third author was also supported by the project CSF 201/03/0934, and by MSM 0021620839.     

用力敏传感器测量液体表面张力系数

从力敏传感器测力的原理出发，总结了用力敏传感器测量液体表面张力系数实验的诸多优点，并阐述了这个实验的现实意义．     

气轨上简谐振子运动规律的探讨

本文探讨了空气粘滞阻力诸因素对气轨上简谐振子运动规律的影响，澄清了一些模糊认识，提出了减小影响的最直接有效的方法。     

Melting behavior of lamellae of isotactic polypropylene studied using hot-stage atomic force microscopy

The α- and β-form lamellae of isotactic polypropylene were developed at different temperatures. The melting behaviors of the lamellae were observed in real time at elevated temperatures using a hot-stage atomic force microscopy. The melting behavior of the α-form lamellae was determined by the lamellar defects. For the α-form lamellae developed at different undercoolings, the larger the undercoolings, the relatively higher amount of defect in the lamellae was observed. The lamellae with defects were melted into lamellar segments, and recrystallization took place during the heating process. The β-form lamellae had lower thermal stability, and they melted firstly and separately from that of α-form.     

Connections Between the Riemann and the Lorentz Force Laws

It is known that for the magnetic force due to a closed circuit, the Weber force law can be identical to the Lorentz force law. In this investigation it is shown that for both the electric and the magnetic force of the quasi-static case, the Riemann force law can be identical to the Lorentz force law, while the former is based on a potential energy depending on a relative speed and is in accord with Newton's law of action and reaction.     

Selection of response measurement locations to improve inverse force determination

The forces obtained by inverse methods are prone to errors. These arise due to a combination of errors in the measurements and high condition numbers in the matrix of transfer functions to be inverted. Ill-conditioning of the frequency response function matrix causes measurement errors to be magnified significantly. When the condition numbers are small, the measurement errors simply propagate without much amplification. Due to modal behaviour of the structure, the condition numbers can vary significantly over the frequency range and with the spatial location of the response measurements. The spatial variation can be quite considerable across the structure. The potential for using this characteristic to improve force determination is explored in this paper as an alternative to matrix regularization methods. The aim is to reduce error magnification in inverse methods by an ‘optimal’ spatial distribution of response locations. A method is proposed which is based on the minimization of the average condition number across the frequency range. If many possible locations are available, however, this can involve excessive calculation. An approximate method is therefore proposed which results in consistently good location selection for use in inverse force determination but involves much less computational effort. The error reduction in reconstructed forces is found to be significant in numerical simulations on a simply supported plate and in validation experiments.     

Do epoxy–amine networks become inhomogeneous at the nanometric scale?

Epoxy–amine networks are known to be homogeneous. However, using new analysis tools that allow the observation scale to be reduced to a nanometric level, some authors have stated the opposite. In this work, the network morphology has been studied with atomic force microscopy in the tapping mode as a function of the hardener nature and the stoichiometry of the reactive blend. A very homogeneous epoxy network topography, similar to that of an amorphous thermoplastic, has been obtained. For comparison, a truly heterogeneous network topography, like that of unsaturated thermosets cured by free‐radical mechanisms, has been imaged. For the observation of surfaces on a scale smaller than a nanometer, caution must be taken:(1) the tips must be freshly cleaned so that distortion on the image is prevented and (2) the surfaces must be very flat so that the phase contrast is not influenced significantly by differences in the sample topography. This works gives guidelines on using atomic force microscopy in the tapping mode for epoxy–amine network characterization and discusses epoxy–amine network homogeneity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2422–2432, 2003     

轻核中中子间的对相互作用和中子晕

选择Skyme势E作为两核子间唯象相互作用,在Hartree-Fock理论中结合粒子数守恒方法处理同类核子间的对相互作用,计算了Li和Be的丰中子同位素的结构,计算表明中子间的对相互作用和双中子晕之间存在紧密的联系.     

X-ray reflectivity study on gold films during sputter deposition

We performed in-situ X-ray reflectivity measurements of gold films during sputter deposition on polished silicon substrates. The measurements were performed at several substrate temperatures and under two argon pressures. The gold surfaces were also examined by scanning tunneling microscopy after deposition to obtain their real-space topographic images. These images were used to complement the X-ray reflectivity measurements in determining the effect of argon pressure on the gold surface and its height-height difference functions. An approximation for height-height difference functions was employed to analyze the X-ray reflectivity data. The measured interface width during growth followed a simple power law, consistent with recent theoretical results of dynamic scaling behavior. The scaling exponents, however, do not agree well with predictions based on some models in 2 + 1 dimensions.