Elastomeric Properties of Polysiloxane Networks. Bimodal Elastomers that are Spatially Inhomogeneous and Others that are Very Broadly Multimodal

End‐linking poly(dimethylsiloxane) was used to prepare bimodal elastomers networks so as to have inhomogeneous nanostructures, and also to prepare others having very broadly multimodal chain‐length distributions. Macroscopic phase separation, probably high crosslink density clusters, was observed to occur in some of the bimodal networks. The mechanical properties in simple extension and in equilibrium swelling were measured. The bimodal elastomers that were not obviously inhomogeneous showed very good mechanical properties, but the macroscopically phase‐separated networks, and the broadly multimodal network were weak. Analysis of the Mooney‐Rivlin profiles suggests that the reinforcing mechanism could have a structural component in addition to that from the limited extensibilities of the short chains. The mechanical properties and the extents of swelling support the cluster conjecture, in accord with previous morphological studies on spatially‐inhomogeneous polysiloxane elastomers.     

Density Functional Theory Study on the Adsorption of Dioxygen on Small Pt-Pd Clusters

1 INTRODUCTION The bimetallic nanoclusters are of standing inte- rest since they can exhibit catalytic, electronic and optical properties distinct from those of corre- sponding pure nanoclusters[1～4]. Palladium and pla- tinum, well known for their catalytic properties, are often used as the catalyst in different fuel cells[5～8]. Several experimental results illustrate that for the oxygen reduction reaction (ORR), which is one of the primary reactions taking place in many fuel cells and…     

ADSORPTION ISOTHERMS AND POTENTIAL DISTRIBUTIONS OF NITROGEN ON VARIOUS ACTIVATED CARBONS

The adsorption isotherms of four activated carbons (Norit RB1, Chemviron BPL, Monolit, and Ambersorb-572) have been examined by nitrogen adsorption at 77.5 K. A method for adsorption potential distribution calculation has been proposed based on the adsorption isotherms. This distribution provides information about possible changes in the Gibbs free energy caused by the energetic and geometrical heterogeneities of an activated carbon as well as by the adsorbate-related entropic effects. The general character of the adsorption potential distribution is clearly visible by its simple relation to the micropore and mesopore distribution.     

A study of the copolymerization of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate

The free radical copolymerizations of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate have been investigated at 50°C. The compositions of polymers prepared at low conversions have been determined using ¹³C-NMR, and the glass transition temperatures determined by DSC. The copolymerizations were found to be best described by a terminal model with reactivity ratios of r_H = 1.79 and r_T = 0.76. The triad fraction sequence distributions have been calculated based on the terminal model and the calculated reactivity ratios. The glass transitions have been fitted to the Gordon–Taylor equation. The best value of the Gordon–Taylor constant was found to be k_H = 1.42 ± 0.2, indicating nonideal mixing of the two monomer components in the copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3730–3737, 1999     

Statistical analysis of computational docking of large compound data bases to distinct protein binding sites

The results of 16 docking simulations with rigid receptor sites and flexible ligands (∼60,000 compounds in each case) are statistically analyzed and compared. Different combinations of binding sites, scoring functions, and compound collections are used in these calculations. The docking scores are not randomly distributed over the scoring range; they follow Gaussian distributions (regardless of the binding sites), scoring functions, or screened compounds. If the docking sites are small, the Gaussian distributions are positively skewed. Peaks of the Gaussian distributions are populated with compounds having similar scores but different sizes and binding modes. These findings have implications for compound selection via computational docking. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1634–1643, 1999     

Microwave and RF surface wave sustained discharges as plasma sources for plasma chemistry and plasma processing

The surface wave produced plasma belongs to a class of RF and microwave induced plasmas. It results from the propagation of an electromagnetic wave which uses the plasma column it sustains and the plasma tube as its sole propagating media. This type of plasma offers several advantages compared to the positive column plasma of dc discharges or to other RF and microwave produced plasmas. Surface wave plasmas require no internal electrodes, and they can be applied over an extremely broad range of wave frequencies (27 MHz to 10 GHz demonstrated) and gas pressures (about 10^–4 Torr to a few times the atmospheric pressures). Using the surface wave plasma technique, a large variety of plasma column diameters have been created (0.5–150 mm demonstrated) and no limitation on plasma column length (column up to 6 m long demonstrated) has been found. The surface wave produced plasma is used in elemental analysis and to sustain emission in lasing media. This article is intended as a guide for potential users of surface wave plasmas in the field of plasma processing and plasma chemistry.     

THE RELATION OF SEQUENCE DISTRIBUTIONS OF S-SBR TO ITS MOLECULAR WEIGHT DISTRIBUTIONS

The relationship between sequence distributions and molecular weight distributions of S-SBR, obtained from styrene and butadiene anionic copolymerization at various conversions with THF/Li~+ as an initiator has been studied by ~(13)C-NMR,GPC. The results showed that the molecular weight distributions of the copolymer couldbe correlated sophisticatedly to the binary sequcne distributions or the monomer unit distributions of the copolymer in a corrected Poisson's distribution from.     

基于机器学习的直接电离质谱爆炸物检测方法

直接电离质谱系统在现场快速检测中的应用日益广泛,主要用于爆炸物、毒品、食品添加剂等的检测.然而,直接电离质谱系统中质谱信号波动大且同一浓度样品峰强呈现对数正态分布,严重影响了检出限附近低浓度样品的检测准确性.该研究将乙酰水杨酸(115个样品)作为爆炸物模拟物,利用介质阻挡放电离子源与质谱系统,研究了基于机器学习的直接电...     

Concentration profiles and breakthrough curves in non-linear chromatography

The treatment of the non-linear isotherm in chromatography by one of the authors [1] is extended to other cases of practical interest. The original paper dealt with the case of an initially thin zone resulting in a Poisson distribution the asymmetry of which is a function of the plate number and the non-linearity constant. The present work shows that the same relations apply to initially thick zones and to the cases of washing and deposition leading to simple relations for breakthrough curves. For significantly non-linear isotherms other quasi-Gaussian distributions can give a better fit.     

On a Comparative Study on Some Trigonometric Classes of Distributions by the Analysis of Practical Data Sets

The aim of this paper is twofold. Firstly, we elaborate and investigate a new trigonometric class of distribution, called the type II Tan-G class. Secondly, we perform a practical comparative evaluation of certain trigonometric classes; the Sin-G, Cos-G, Tan-G classes and the new one, with each other and with their common baseline distribution. More specifically, the usefulness and flexibility of these trigonometric classes are demonstrated through twelve practical data sets, by using the Weibull distribution as baseline. Among the data sets, two of them concern the Covid-19 pandemic in France from March to June 2020. As main results, it is shown that the related trigonometric models can outperform the former Weibull model in various cases and that the proposed type II Tan Weibull model can be, in certain situations, the best of them. The main lines of the code written in the \textsf{R} software language are provided.