Effects of metal irises on the guided-mode properties in asymmetrical slab waveguides

The diffraction phenomenon caused by metal transverse irises placed into an asymmetrical slab waveguide is examined by using the integral equation method. We concentrate on the possibility of controlling the radiation characteristics of the structure by changing the irises positions and the slab waveguide asymmetry. The aperture electric-field distribution is expressed in terms of a finite series of Chebyshev polynomials. The dominant TE guided-mode reflection and transmission coefficients, the near-field distribution and the far-field radiation pattern are calculated, while numerical results are presented for several cases of asymmetrical slab waveguides and different irises’ positions.     

Compact multimode interference coupler with tapered waveguide geometry

In this paper, a novel MMI coupler, based on general interference, with tapered waveguide geometry has been proposed for reduction of coupling length. The coupling characteristics and power imbalance of the proposed structure are compared with conventional MMI structures by using a mathematical model based on sinusoidal modes. It is seen that the beat length for tapered MMI coupler with angle of taper ∼1.05° is reduced by ∼24% of that of conventional MMI coupler and the coupling characteristics obtained with the mathematical model, match well with those obtained by more sophisticated BPM computer aided design software. The power imbalance for tapered 3 dB MMI coupler is more sensitive to the wavelength than that for conventional 3 dB MMI coupler and variation of power imbalance with fabrication tolerance for both the MMI coupler is almost same.     

基于表面等等离波子的新型Y分支波导

新型高效的纳米光波导器件的研制纳米集成光学的核心技术之一。Y分支波导作为最基本的分光和光路连接元件是纳米光学器件设计与制备的基础。运用时域有限差分(FDTD)法,模拟计算了基于表面等等离波子(SPP)的纳米Y分支波导的传输特性。结果表明,该新型Y分支波导在光通信波段可以实现大角度的分光功能,且在180°分支情况下,传输效率仍高达92.8%以上。另外,该波导还具有导波性能良好、对分叉处间隙缺陷大小不敏感及制作容差较大和器件尺寸在纳米量级等特点。对该新型光波导器件的研究为未来纳米集成光学器件的研制和应用有一定的指导意义。     

Optical and Electrical Properties of Ferroelectric SBN Thin Films Prepared by Sol-Gel Process

Strontium barium niobate thin films were prepared by sol-gel method on various substrates using an improved process, two-step heating process. The two-step heating process applies an additive heat-treatment before crystallization for enhancement of the densification and the nucleation of films. Also, highly c-axis oriented SBN thin films with various compositions were obtained on MgO(100) and Pt(100)/MgO(100) substrates. Their optical and electrical properties such as optical propagation loss, refractive index, P-E hysteresis, and dielectric constant, were characterized as a function of the film composition.     

Modeling of waveguide UV-induced Bragg gratings with arbitrary apodization function: Tools for designing high-performance related devices

We present a semi-analytical modeling suitable for the investigation of the spectral characteristics of UV-waveguide Bragg gratings (UV-WBGs) having arbitrary apodization function and extending both in the film layer and in the overlayer. The modeling is based on a proper combination of coupled mode theory and transfer matrix formalism and provides a powerful tool for designing and simulation of complex UV-grating based structures. The results of a detailed investigation of UV-WBGs in doped silica based channel optical waveguides are presented and critical issues for upgrading the performances of related device are discussed. Validation of the modeling is provided by means of an extensive comparison between theoretical and experimental results relevant to UV-WBGs realized in phosphorous (P)- and boron (B)-doped silica based waveguides.     

Coaxial waveguide gyro-peniotron

A coaxial waveguide gyro-peniotron with largeorbit beam is proposed. The linear thoery of 3-D model is given to describe this device. The influences of the beam radius and beam current on the normalized growth rate are discussed in terms of numerical analysis.     

脊形波导中导模传输与损耗的分析与计算

本文运用有效折射率法把脊形波导化成等效二维平板波导后,再运用微分法求出弱吸收情况下波导模的吸收损耗,其方法简便,精确度高.     

Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides

Successful demonstration of selective area doping of planar glass samples for monolithic integration of optically passive and active devices on a single chip is presented. Salt solution of erbium was delivered onto pre-sintered germano-silicate samples via a syringe. The samples were then consolidated to form dense glass layers containing regions doped with rare earth. Erbium tri-chloride solution, 0.1 M, was used during the solution doping phase, with the resulting erbium atomic percentage ranging from more than 0.1-0.4%, increasing linearly with the number of drips applied.     

Analysis for Transmission Characteristics of Closed Trapezoidal-Groove Waveguide with Boundary Element Method

In this paper, the cut-off and dispersion characteristics of a new kind of closed trapezoidal-groove waveguide that has more advantages than open groove waveguides are analyzed with the help of the boundary element method, the relationship between cut-off wavelengths and variations of guide's relative sizes is discussed in detail. The calculated results are in good agreement with those in the relevant reference. So, the obtained conclusions are very important in theoretical studies and actual applications of closed trapezoidal-groove waveguides for millimeter and submillimeter waves.     

Crosstalks of two-waveguide and three-waveguide directional couplers

Crosstalks of two-waveguide and three-waveguide directional couplers are analyzed mathematically based on the relationship between the coupled mode and the normal mode. Numerical techniques such as the finite-difference method and the beam propagation method are employed to confirm the validity of the derived expressions. The calculation results show that two-waveguide directional coupler is superior to any type of three-waveguide couplers from the practical viewpoint of the crosstalk and the coupling length.