双面HIT太阳电池TCO与非晶硅界面势垒的模拟优化

采用美国滨州大学研发的AMPS-1D软件,模拟了TCO与非晶硅界面势垒对TCO/a-Si:H(p+)/a-Si:H(i)/c-Si(n) /a-Si:H(i) /a-Si:H(n+) /TCO双面HIT异质结太阳电池光伏特性的影响。结果表明太阳电池的TCO/p+前接触界面势垒（对于电子）越高,越易形成欧姆接触,且电池的短波响应增强,使电池性能变好。模拟还发现,n+ /TCO背接触界面势垒（对于电子）越低,电池性能越好。若背场重掺杂,在背接触势垒小于等于0.5ev时,电池的转换效率不会受到背接触势垒的影响;若背场低掺杂,在背接触势垒很小的情况下,也能达到与重掺杂相同的转换效率。     

楔形盒染料掺杂胆甾相液晶激光器研究

设计制作了楔形盒掺杂激光染料PM580的胆甾相液晶器件, 研究了激光辐射行为. 在楔形液晶盒中出现了一系列与楔棱平行的向错线和不同规则形状的晶畴, 胆甾相液晶形成了平面态排列. 采用固体Nd:YAG倍频532 nm 波长激光作为抽运光, 获得调谐精度约1 nm, 调谐范围约17 nm的一维波长可调谐激光器. 楔形盒中, 液晶扭曲力与取向膜表面锚定力相互平衡的过程中胆甾相液晶螺距伸张, 光子禁带位置移动, 从而调谐光子禁带边沿出射激光波长. 关键词： 胆甾相液晶 楔形盒 激光辐射     

国内CIDEP研究进展

化学诱导动态电子极化（CIDEP）是检测瞬态顺磁粒子并表征其特征的强有力的手段,对于研究光化学和光物理瞬态过程的微观机理和规律有重要意义. 本文较为详细地总结了4种常见的CIDEP机理,讨论了各种极化谱及相应的极化条件;简要介绍了国内研究小组在CIDEP理论以及在均相溶液和微复相体系中光化学过程的CIDEP研究成果.      

甲基紫掺杂聚乙烯醇薄膜材料红光多重全息存储

甲基紫掺杂聚乙烯醇薄膜材料在两束相干光照射下生成相位光栅.当改变一束相干光光程,通过监测相位光栅的一级衍射信号强度的变化,可以检测相位光栅的生长和擦除过程.在此实验基础上,讨论了甲基紫掺杂聚乙烯醇薄膜材料多重全息存储的原理与结果.     

电控发动机喷油脉宽的分析

本文介绍了利用喷油脉宽大小的变化来分析电控发动机电控系统、燃油供给等系统故障的一种方法,在汽车故障检测与诊断中有着广泛的应用。     

C波段平面异向介质设计及其后向波特性验证

提出了一种工作在C波段的新型平面结构异向介质，它除了带宽宽和损耗小外，还具有体积小、结构简单的优点，而且能够实现工作频段的平移，频率平移范围为4—20 GHz.基于电磁波由自由空间入射半无限大异向介质平板的传输和反射数据，计算出了电波在其中传播时的相速随频率的变化曲线，结果表明所讨论的异向介质确实在预想的频段上表现出后向波特性；同时利用相位观察法进一步验证了上述的后向波特性，从而肯定了异向介质的存在. 关键词： 异向介质 宽频带 小单元 后向波特性     

微加工薄膜变形镜特性分析

 借助测量微加工薄膜变形镜驱动器的面形影响函数,分析了驱动器的电压-位移函数和驱动器之间的线性叠加性;通过对连续面形变形镜拟合像差的理论分析和实验研究,建立了微加工薄膜变形镜电压解耦模型。分析了对前36阶Zernike模式的拟合残差和拟合能力,指出微加工薄膜变形镜仅可用来拟合低级像差并且有较大的拟合能力和较小的拟合残差,而不能拟合高级像差。     

基于液晶光阀的全息照相控光仪

设计了通过液晶光阀自动调整全息照相物光和参考光辐照比至最佳状态,同时能实现曝光时间自动控制的控光仪.该仪器巧妙运用液晶光阀和硅光电池器件,使测量、调整、自控一体化,从而提高拍摄优质全息图的工作效率.     

Determination of the rate of rapid lipid transfer induced by poly(ethylene glycol) using the SLM Fourier transform phase and modulation spectrofluorometer

Rate constants were determined for the transfer of the fluorescent lipid probe 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] oxy]carbonyl]-3-sn-phosphatidylcholine (DPHpPC) between large, unilamellar extrusion vesicles composed either of dipalmitoyl phosphatidylcholine (DPPC) or of DPPC mixed with a small amount (0.5 mol%) of lyso phosphatidylcholine (Lyso PC). Transfer of the lipid probe in the presence of varying concentrations of poly(ethylene glycol) (PEG) was monitored using the SLM 48000-MHF Multi-Harmonic Fourier Transform phase and modulation spectrofluorometer to collect multifrequency phase and modulation fluorescence data sets on a subsecond time scale. The unique ability of this instrument to yield accurate fluorescence lifetime data on this time scale allowed transfer to be detected in terms of a time-dependent change in the fluorescent lifetime distribution associated with the lipid-like DPHpPC probe. This probe demonstrates two short fluoresence decay times (ca. 1.1–1.4 and 4.3–4.8 ns) in a probe-rich environment but a single long lifetime (ca. 7 ns) in a probe-poor environment. A simple two-state model for initial lipid transfer was used to analyze the multifrequency data sets collected over a 4-s time frame to obtain the time rate of change of the concentrations of donor and acceptor probe populations following rapid mixing of vesicles with PEG. The ability to measure fluorescence lifetimes on this time scale has allowed us to show that the of rate of lipid transfer increased dramatically at 35% PEG in both fusing and nonfusing vesicle systems. These results are interpreted in terms of a distinct interbilayer structure associated with intimate bilayer contact induced by high and potentially fusogenic concentrations of PEG.     

Influence of milk fat globule membrane and milk protein concentrate treated by ultrasound on the structural and emulsifying stability of mimicking human fat emulsions

The primary objective of the present study was to investigate the effectiveness of ultrasonic treatment time on the particle size, molecular weight, microstructure and solubility of milk fat globule membrane (rich in phospholipid, MPL) and milk protein concentrate (MPC). The mimicking human fat emulsions were prepared using modified proteins and compound vegetable oil and the structural, emulsifying properties and encapsulation efficiency of emulsions were evaluated. After ultrasonic treatment, the cavitation caused particle size decreased and structure change of both MPL and MPC, resulting in the enhancement of protein solubility. While, there was no significant change in molecular weight. Modified proteins by ultrasonic may cause a reduction in particle size and an improvement in emulsifying stability and encapsulation efficiency of emulsions. The optimal ultrasonic time to improve functional properties of MPL emulsion and MPC emulsion were 3 min and 6 min, respectively. The emulsifying stability of MPL emulsion was superior to MPC emulsion, which indicated that MPL is more suitable as membrane material to simulate human fat. Therefore, the obtained results can provide basis for quality control of infant formula.