Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

嵌套病例对照研究中的两步估计方法（英）

本文讨论嵌套病例对照研究中相对危险率的估计问题，引入了相对危险率的两步估计，并在一般嵌套病例对照抽样的假设下讨论了相对危险率的两步估计的相合性问题，最后给出了几个例子。     

正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.     

原子力显微术轻敲模式中探针样品接触过程及相位衬度研究

借助简单的有阻尼受迫振子模型，研究了原子力显微术轻敲模式中探针与样品接触时间t_c、样品的表面形变D_z和相位衬度对探针设置高度z_c及样品杨氏模量E_s的依赖关系.结果发现,t_c与D_z均随E_s及z_c的增大而减小，同时探针与样品作用过程伴随很小的能量耗散.对轻敲过程中相移量φ的研究表明，E_s较大的样品有较小的φ，且φ随 关键词： 原子力显微术 轻敲模式 相位衬度     

资源共享方式若干问题的研讨

社会公用服务系统和工程技术系统，存在共同的资源共享问题。本文通过典例就资源共享方式的若干问题加以探究：讨论广义的多用户系统中人工资源共享方式的分类；阐述常用的共享方式的特点、优缺点；分析系统时间性能及其改进与共享方式的关系等。文章还提出在系统工程范畴里，应对社会公用服务和工程技术两类系统的资源共享方式予以综合研究，并相互借鉴和移植。     

Reaction Mechanism Investigation Using Vibrational Mode Analysis for the Multichannel Reaction of CH_3O+CO

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｍｅｔｈｏｘｙｒａｄｉｃａｌ (ＣＨ3Ｏ)ｉｓａｎｉｍｐｏｒｔａｎｔｉｎｔｅｒ ｍｅｄｉａｔｅｉｎｔｈｅｐｈｏｔｏｃｈｅｍｉｃａｌｏｘｉｄａｔｉｏｎｏｆｈｙｄｒｏｃａｒｂｏｎｓｉｎｔｈｅａｔｍｏｓｐｈｅｒｅ ,1 3ａｎｄｐｌａｙｓａｓｉｇｎｉｆｉｃａｎｔｒｏｌｅｉｎｔｒａｎｓ ｆｏｒｍｉｎｇｎｉｔｒｉｃｏｘｉｄｅｔｏｎｉｔｒｏｇｅｎｄｉｏｘｉｄｅ .4 Ｓｉｍｉｌａｒｌｙ ,ｔｈｅｒｅａｃｔｉｏｎｍｅｃｈａｎｉｓｍｓｏｆｈｙｄｒｏｘｙｌａｎｄｃａｒｂｏｎｍｏｎｏｘｉｄｅ5,6ａｎｄｏ…     

分离变量法与等腰直角三角形波导的边值问题

根据叠加原理，讨论等腰直角三角形波导边值问题的IE波解和TM波解，纠正有关文献中的错误解法，指出分离变量法的适用条件。     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

负关联噪声驱动下单模激光的定态分析

研究了负关联的加法和乘法高斯白噪声驱动下单模激光损失模型的定态情况。文中推导了负关联情况下，定态时的激光场幅的几率分布，光强的平均值，光强的协方差以及光强的偏斜率。并和文献〔１，２〕中正关联时的定态分析作了比较，发现了有意义的新现象。