Magnetic and electrical properties of bulk BaTiO3+MgFe2O4 composite

BaTiO₃+MgFe₂O₄ material system was synthesized by hybrid chemical process using chlorides and nitrates of barium, titanium, iron, and magnesium. Magnetic properties of the composite samples measured as a function of annealing conditions indicated soft magnetic behavior. Saturation specific magnetization from 8 21 emu/g was observed for samples annealed at temperature between 950 and 1150 °C. Variation of specific saturation magnetization with respect to annealing temperature was related with the distribution of Fe cations in the tetrahedral and octahedral sites of MgFe₂O₄. Electrical properties of the samples annealed at different temperatures were measured to analyze the coexistence of ferroelectric phase. Dielectric constant varying from 15 to 200 with respect to frequency was observed for samples annealed from 950 to 1150 °C.     

Hard magnetic properties of anisotropic Sm-Fe-N magnets produced by compression shearing method

Anisotropic Sm-Fe-N bulk magnets were produced by the compression shearing method using a hardened steel plate and a tungsten-carbide (WC) plate. It was found that the magnets retained the original Sm₂Fe₁₇N₃ phase structure without any appreciable decomposition of the Sm₂Fe₁₇N₃ phase. The anisotropic Sm-Fe-N bulk magnet produced using a WC plate had a higher density and higher crystallographic alignment of the Sm₂Fe₁₇N₃ phase than that produced using a hardened steel plate, and exhibited high maximum energy products of 228 kJ/m³ with a high coercivity of 0.88 MA/m.     

Improvement of the magnetic properties of barium hexaferrite nanopowders using modified co-precipitation method

Barium hexaferrite BaFe₁₂O₁₉ powders have been synthesized using the modified co-precipitation method. Modification was performed via the ultrasonication of the precipitated precursors at room temperature for 1 h and the additions of the 2% KNO₃, surface active agents and oxalic acid. The results revealed that single phase magnetic barium hexaferrite was formed at a low annealing temperature of 800 °C for 2 h with the Fe³⁺/Ba²⁺ molar ratio 8. The microstructure of the powders appeared as a homogeneous hexagonal platelet-like structure using 2% KNO₃ as the crystal modifier. A saturation magnetization (60.4 emu/g) was achieved for the BaFe₁₂O₁₉ phase formed at 1000 °C for 2 h with Fe³⁺/Ba²⁺ molar ratio 8 using 5 M NaOH solution at pH 10 in the presence of 2% KNO₃. Moreover, the saturation magnetization was 52.2 emu/g for the precipitated precursor at Fe³⁺/Ba²⁺ molar ratio 12 in was achieved for the precipitated precursor ultrasonicated for 1 h and then annealed at 1200 °C for 2 h. Coercivities from 956.9 to 4558 Oe were obtained at different synthesis conditions.     

Structures, stabilities and magnetic properties of FeCon−1 (n≤16) clusters

Under GGA, size dependence of the geometrical structures, stabilities and magnetic properties of FeCo_n−1 clusters (n≤16) have been investigated together with the Co_n clusters for comparison using DFT within the PAW method implemented in VASP. The replaced Fe atom is favorable to occupy the surface position except for FeCo₁₃. The peaks appeared at n=6, 9 and 11 for FeCo_n−1 clusters and at n=6, 9 and 12 for Co_n clusters on the size dependence of second difference of total energy imply that these clusters possess relatively higher stability. The magnetic moment is strongly correlated with the effective hybridization, which is closely related to the average bond length 〈d〉 and average coordination number 〈n_c〉. A small change in the total charge of Fe atom in FeCo_n−1 clusters will lead to a relative large reverse change in the total magnetic moment of Fe atom.     

Synthesis of nanocrystalline Co-Ni alloys by precursor approach and studies on their magnetic properties

Nanocrystalline Co-Ni alloys with different compositions were prepared by polyol reduction of mixed cobalt nickel hydroxides. The precursors (mixed cobalt nickel hydroxides) were prepared by co-precipitation. Powder X-ray diffraction analysis indicated the formation of fcc phase in the alloys and their crystallite size in the range 17-25 nm. Scanning electron microscopy and transmission electron microscopy studies revealed the morphology of the particles as being close to spherical, and the energy dispersive X-ray analysis showed the stoichiometry of the alloys. The magnetization as a function of field and temperature of the alloys, measured using a superconducting quantum interference device, showed superparamagnetic behavior with negligible coercivity and remanence values.     

Influence of Sm-substitution on structure and electromagnetic properties of Ba3−xSmxCo2Fe24O41 powders

Sm-substituted barium hexaferrites, Ba_3−xSm_xCo₂Fe₂₄O₄₁ (x=0-0.25), were prepared by a conventional ceramic sintering method. The microstructure, complex permittivity, complex permeability and static magnetic properties of the samples were studied using powder X-ray diffraction, field emission scanning electron microscopy, vector network analyzer and vibrating sample magnetometry. The results reveal that by introducing a relatively small amount of Sm³⁺ instead of Ba²⁺ an important modification of both structure and high-frequency electromagnetic properties can be obtained. Doping of Sm³⁺ suppressed the grain growth and gave rise to a decrease of the grain size. As the Sm content increases, the static magnetic properties continuously increase. The real part and imaginary part of complex permittivity initially increase with Sm content, and then decreases when x>0.10. The imaginary part of complex permeability decreases after Sm³⁺ is doped. There is no obvious change in the real part of the complex permeability for different Sm contents. The reasons are discussed using electromagnetic theory.     

Monte Carlo simulation of magnetic phase transitions in Mn-doped ZnO

The magnetic properties of Mn-doped ZnO semiconductor have been investigated using the Monte Carlo method within the Ising model. The temperature dependences of the spontaneous magnetization, specific heat and magnetic susceptibility have been constructed for different concentrations of magnetic dopant Mn and different carrier concentrations. The exact values of Mn concentration and carrier concentration at which high temperature transition occurs are determined. An alternative for the explanation of some controversies concerning the existence and the nature of magnetism in Mn diluted in ZnO systems is given. Other features are also studied.     

Effect of Fe substitution on multiferroic hexagonal YMnO3

Polycrystalline YMn_1−xFe_xO₃ (x=0.02-0.20) powders were synthesized by means of modified citrate method. Powder X-ray diffraction gives evidence that all the samples are single phase and exhibit hexagonal structure with P6₃cm space group as observed for YMnO₃. The solubility limit of Fe was determined as about 6 wt.%. Cell parameter values were found to increase with Fe content, since Fe³⁺ and Mn³⁺ have the same ionic radii. This can be attributed to the increase of the tilting of MnO₅ bipyramid and the buckling of Y atoms. In addition, ⁵⁷Fe Mössbauer spectrometry provides evidence of two Fe³⁺ sites attributed to two different nearest atomic neighbours. Magnetic properties reveal a paramagnetic-to-antiferromagnetic transition, a possible increase of the magnetic anisotropy, and a competition between ferromagnetic and antiferromagnetic interactions.     

Electromagnetic properties and microwave absorption properties of BaTiO3-carbonyl iron composite in S and C bands

BaTiO₃ powders are prepared by sol-gel method. The carbonyl iron powder is prepared via thermal decomposition of iron pentacarbonyl. Then BaTiO₃-carbonyl iron composite with different mixture ratios was prepared using the as-prepared material. The structure, morphology, and properties of the composites are characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, scanning electron microscopy (SEM), and a network analyzer. The complex permittivity and reflection loss of the composites have been measured at different microwave frequencies in S- and C-bands employing vector network analyzer model PNA 3629D vector. The effect of the mass ratio of BaTiO₃/carbonyl iron on the microwave loss properties of the composites is investigated. A possible microwave absorbing mechanism of BaTiO₃-carbonyl iron composite has been proposed. The BaTiO₃-carbonyl iron composite can find applications in suppression of electromagnetic interference, and reduction of radar signature.     

Effect of pH value on the structural and magnetic properties of nanocrystalline strontium hexaferrite thin films

Strontium hexaferrite SrFe₁₂O₁₉ thin films have been synthesized at different pH, adjusted by NH₄OH, on the Si (1 0 0) substrate using a spin coating sol-gel process. Fourier transform infrared spectroscopy analysis and theoretical calculations were conducted for determination and controlling metal citrates in solution precursors. X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer were applied to evaluate the composition, microstructure, crystallite size and magnetic properties of the SrFe₁₂O₁₉ thin films. Using the solution with pH 7, the approximately single phase strontium hexaferrite thin films with optimum physical properties can be obtained at calcination temperature of 800 °C. The SrFe₁₂O₁₉ thin films derived from the solution with pH 7 after calcination at 800 °C exhibited crystallite size of 42 nm and magnetic properties of M_s=267 emu/cm³ (at 10 kOe), M_r=134 emu/cm³ and H_c=4290 Oe.