Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

Zustandsbarogramme — Zustandsdiagramme durch Gesamtdruckmessungen

From phasebarograms it is possible to construct phase diagrams. We show on example of the system Bi/Se/O how follow ternary sections from the total pressure measurements in equilibrium and how we can attribute the barogram of the ternary region Bi₂Se₃/Bi₂O₂Se/Se to the binary system Bi₂Se₃/Se. The knowledge of the ternary system Bi/Se/I and its coexistent pressure courses allow to followT-p-x conditions for the chemical transport of phases from this system.

     

Diamond synthesis by DC thermal plasma CVD at 1 atm

Diamond crystals and films have been success full y synthesized by DC thermal plasma jet CVD at a pressure of I atrn. A novel triple torch plasma reactor has been used to generate a convergent plasma volume to entrain the participating gases. Three coalescing plasma jets produces! by this reactor direct the dissociated and ionized gaseous species onto ( 100) silicon wafer substrates where the diamond grows. In a typical 10-min run, depending on the method of .substrate preparation, either microcrystals with sizes up to 8 m or continuous films with thicknesses of 1–2 m have been obtained. X-ray diffraction, scanning electron microscopy, and Raman spectroscopy have been used for the characterization of the crystals and of the films.     

Frequent analytical/experimental problems in lipase-mediated synthesis in solvent-free systems and how to avoid them

Compared with chemical catalysis, enzymatic catalysis is a relatively new topic. Experimental work involving lipases deserves careful attention and accurate procedures still need to be implemented. A rapid but careful survey of published data immediately demonstrates that experiments performed under similar conditions with similar reagents have led to very different results. The aim of this work is to point out the importance of accurate and systematic procedures in order to ensure the reproducibility of experimental data. We strongly believe that different results found by different labs are due to problems detected in the procedures used. Quantification of the immobilisation efficiency of lipase on several supports through UV/visible methods and sampling methods used to obtain correct enzymatic activity values are specifically analysed. After a brief review which demonstrates the big discrepancies found in the literature, original data from Candida rugosa lipase adsorption on polypropylene powder and its use in the solvent-free synthesis of ethyl oleate are introduced in order to exemplify the difficulties found in these kinds of systems. Several procedures described in the literature are assayed and the accuracy of the results obtained is carefully analysed. The aim of the whole analysis performed is that it would be useful for any powdered solid to be used as a support for a lipase in a solvent-free system for any synthesis reaction, especially for those involving a volatile reagent. Throughout this contribution, special emphasis is placed on how catalytic reaction results using enzymes (free and immobilised) are reported so as to allow comparison between published data, something which is usually difficult since very different units are used and often complementary data are not included.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

On the Temperature–Pressure Free‐Energy Landscape of Proteins

We studied the thermodynamic stability of a small monomeric protein, staphylococcal nuclease (Snase), as a function of both temperature and pressure, and expressed it as a 3D free‐energy surface on the p,T‐plane using a second‐order Taylor expansion of the Gibbs free‐energy change ΔG upon unfolding. We took advantage of a series of different techniques (small‐angle Xray scattering, Fourier‐transform infrared spectroscopy, differential thermal analysis, pressure perturbation calorimetry and densitometry) in the evaluation of the conformation of the protein and in evaluating the changes in the thermodynamic parameters upon unfolding, such as the heat capacity, enthalpy, entropy, volume, isothermal compressibility and expansivity. The calculated results of the free‐energy landscape of the protein are in good agreement with experimental data of the p,T‐stability diagram of the protein over a temperature range from 200 to 400 K and at pressures from ambient pressure to 4000 bar. The results demonstrate that combined temperature–pressure‐dependent studies can help delineate the free‐energy landscape of proteins and hence help elucidate which features and thermodynamic parameters are essential in determining the stability of the native conformational state of proteins. The approach presented may also be used for studying other systems with so‐called re‐entrant or Tamman loop‐shaped phase diagrams.     

K3MnH5, das erste salzartige Manganhydrid

K₃MnH₅, the First Salt-like Manganese Hydride K₃MnH₅ and K₃MnD₅ were synthesized by the reaction of potassium hydride (deuteride) with manganese powder under a hydrogen pressure above 3000 bar at 875 K. X-ray investigations on powdered samples and elastic neutron diffraction experiments on the deuterated compound at the time-of-flight spectrometer LAD in the temperature range 5–600 K led to the complete structure determination. The atomic arrangement is isotypic with that of Cs₃[CoCl₄]Cl (space group: 14/mcm, Z = 4). The structure of K₃MnH₅ contains isolated [MnH₄]^2?-tetrahedra and additional hydrogen ions which are exclusively coordinated by potassium cations. The magnetic susceptibilities show Curie-Weiss behaviour. At temperatures below 50 K there are obviously antiferromagnetic interactions.     

液相色谱/大气压化学电离飞行时间质谱分析氢化可的松中微量杂质

采用液相色谱/大气压化学电离飞行时间质谱测定氢化可的松对照品中微量杂 质，并采用源内碰撞诱导解离质谱进行了结构定性分析。方法简单，可靠，重现性 好。     

Analysis of nitriles at low parts per million levels by capillary gas chromatography

Two methods have been developed for the determination of trace levels of acetonitrile and propionitrile in light naphthas. One involves clean-up and preconcentration by medium pressure liquid chromatography (MPLC) in which nitriles are concentrated ten-fold while the complex hydrocarbon matris is removed. The concentrated solution is then analyzed by high resolution GC with flame ionization detection. The second method involves direct injection of samples into a capillary GC equipped with chemiluminescence nitrogen detection. The results and repeatability obtained from both methods are comparable. Preconcentration enables identification by GC-MS and simultaneous analysis of other polar species, with no need for selective detectors. Direct analysis is, on the other hand, much less time-consuming and requires less sample.     

氢化物发生石墨炉原子吸收光谱法直接测定高温镍基合金中的硒

在６ｍｏｌ／Ｌ盐酸介质和０．１％ＫＢＨ４条件下，不但能有效地发生硒的氢化物，而且５ｍｇ／ｍｌＮｉ和３ｍｇ／ｍｌＦｅ都不干扰硒的测定。利用涂钯石墨；管作为氢化物的原子化器，直接测定了高温镍基合金中的硒，特征质量为４０ｐｇ，相对标准偏差在６．１％以内，回收率在９７％－１１０％之间。