频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

绿色环保化学机械抛光液的研究进展

原子级加工制造是实现半导体晶圆原子尺度超光滑表面的有效途径.作为大尺寸高精密功能材料的原子级表面制造的重要加工手段之一,化学机械抛光(chemical mechanical polishing,CMP)凭借化学腐蚀和机械磨削的耦合协同作用,成为实现先进材料或器件超光滑无损伤表面平坦化加工的关键技术,在航空、航天、微电子等众多领域得到了广泛应用.然而,为了实现原子层级超滑表面的制备,CMP工艺中常采用的化学腐蚀和机械磨削方法需要使用具有强烈腐蚀性和高毒性的危险化学品,对生态系统产生了不可逆转的危害.因此,本文以绿色环保高性能抛光液作为对象,对加工原子量级表面所采用的化学添加剂进行分类总结,详尽分析在CMP过程中化学添加剂对材料表面性质调制的作用机理,为在原子级尺度下改善表面性质提供可参考的依据.最后,提出了CMP抛光液在原子级加工研究中面临的挑战,并对未来抛光液发展方向作出了展望,这对原子尺度表面精度的进一步提升具有深远的现实意义.     

基于轴角转换器的一种高精度动态测角系统

设计了一种基于轴角转换器AD2S80的高精度感应同步器动态测角系统，分析了测角误差产生原因，提出了误差调整和补偿措施。通过实例数据表明：用谐波分析的方法对测角误差进行了调整与补偿，从而可大幅度提高测角精度。     

Counter-current chromatographic separation of nucleic acid constituents with a hydrophilic solvent system

Nucleic acid constituents such as nucleobases, nucleosides and nucleotides were separated by counter-current chromatography using type J coil planet centrifuge. The separation was performed with a hydrophilic solvent system composed of 1-propanol/800 mM potassium phosphate buffer (pH 7.4) (1:1, v/v) by eluting the lower aqueous phase at a flow-rate of 0.5 ml/min. Eight selected nucleic acid constituents (4.0 mg, 0.5 mg of each), uridine monophosphate (UMP), adenosine monophosphate (AMP), deoxyadenosine monophosphate (dAMP), uridine, urasile, deoxy uridine, adenosine and adenine were well resolved within 160 min.     

A study of the precision and accuracy of peak quantification in comprehensive two-dimensional liquid chromatography in time

Simulated chromatographic data were used to determine the precision and accuracy in the estimation of peak volumes (i.e., peak sizes) in comprehensive two-dimensional liquid chromatography in time (LC × LC). Peak volumes were determined both by summing the areas in the second dimension chromatograms and by fitting the second dimension areas to a Gaussian peak. The Gaussian method is better at predicting the peak volume than the moments method provided there are at least three second dimension injections above the limit of detection (LOD). However, when only two of the second dimension signals are substantially above baseline, the accuracy and precision of the Gaussian fit method become quite poor because the results from the fitting algorithm become indeterminate. Based on simulations in which the modulation ratio (M_R = 4¹σ/t_s) and sampling phase (?) were varied, we conclude for well-resolved peaks that the optimum precision in peak volumes in 2D separations will be obtained when the M_R is between two and five, such that there are typically four to ten second dimension peaks recorded over the eight σ width of the first dimension peak. This sampling rate is similar to that suggested by the Murphy–Schure–Foley criterion. This provides an RSD of approximately 2% for the signal-to-noise ratio used in the present simulations. The precision of the peak volume of experimental data was also assessed, and RSD values were in the range of 4–5%. We conclude that the poorer precision found in the LC × LC experimental data as compared to LC may be due to experimental imprecision in sampling the effluent from the first dimension column.     

Determining the optimum wavelength pairs to use for molecular absorption thermometry based on the continuous-spectral lower-state energy

A novel technique for selecting wavelengths that optimize the temperature precision of absorption-based thermometry is developed. A single universal objective function considering continuous spectral lower-state energy , spectral absorbance intensities and an experimental noise level is derived and applied in a brute-force approach to analyze two-wavelength, Doppler-broadened H₂O vapor-absorbance thermometry in the 1.33-1.37 μm range. The results reveal the top wavelength pairs and their temperature precisions over a wide temperature range from 280 to 2800 K. Although the spectral database used includes over thousands of transitions in this spectral range, the top pairs are composed of only 12 unique wavelengths. This wavelength selection technique is able to help researchers choose key wavelengths that will perform well in practical applications.     

高功率激光装置打靶精度测试技术

 多路激光打靶精度在惯性约束聚变实验中起着至关重要的作用,提出了基于X光针孔相机的激光打靶精度测试方法。根据显微镜读取的靶平面坐标系的靶孔中心坐标及打多孔靶后X光针孔相机所记录的靶孔中心坐标,建立靶平面坐标系和X光针孔相机坐标系之间的转换关系;通过打焦斑靶,建立焦斑模板,采用套模板的方法,读取X光针孔相机坐标系中焦斑中心坐标;由靶平面坐标系和X光针孔相机坐标系之间的转换关系,求出靶平面坐标系中焦斑中心坐标,计算得到激光打靶精度,分析打靶精度测试结果的不确定度,从而给出多路激光打靶精度测量技术和方法。     

中法激光时间比对和探测基本物理的相关空间计划

激光时间比对T2L2(Time Transfer by Laser Link)是法国蔚蓝海岸天文台(OCA)和法国空间中心(CNES)进行的新一代的时间传递计划,将于2008年年中随Jason-2卫星发射上天,并开始观测。它利用激光脉冲在空间的传播来实现地面—卫星,地面—地面远距离时钟的同步,精度比现有的微波比对方式提高1~2个数量级。中国拥有5个固定激光测距站和2个流动激光测距站,基于良好的地理位置和中法双方比较成熟的激光测距技术,中法激光站之间的时间比对和中国内部激光站之间的时间比对是该计划的重要内容。本文系统描述了T2L2的主要内容和关键技术,初步估算了该计划的精度和稳定度,对中法之间的时间比对做出了初步的观测规划。同时,简单介绍了目前世界上精密时钟的发展现况、T2L2的应用前景及正在研究中的TIPO、ASTRODⅠ、ACES、EGE等探测基本物理的相关空间计划。     

基于磁光调制偏振光的空间方位失调角高精度测量新方法

调制偏振光可以作为方位信息的载体,实现方位角度信息的传递,在军事、航天和生物医药等领域有广泛的应用前景.阐述了基于磁光调制偏振光的方位失调角测量原理,分析了现有测量原理中的误差来源.为了从理论方法上提高测量精度,提出了直接计算的方法,将磁光调制后的光强信号直接进行取极值点处理,建立了失调角与极值点之间的方程,详细分析了...     

绩效度量的一致性、敏感性及准确性关系研究

将环境的波动性和度量噪音看作是影响绩效度量的两类不同的随机误差,在Linear-exponential-normal框架下,建立了以价值绩效度量和补偿绩效度量的线性组合为基础的收益激励模型,并分析了激励强度与绩效度量的一致性、敏感性和准确性之间的关系,以及环境波动性对上述关系的影响.研究发现,在确定性环境条件下,激励强度与绩效度量的"信号噪音比"成正比关系,但绩效度量的一致性的提高并不必然增加该度量指标在激励契约中的权重,而要视敏感性或噪音相对于一致性的变化幅度来定.特别地,在绩效度量的敏感性与一致性之间并不存在权衡取舍关系.研究还发现,波动性与激励强度之间存在负向关系,且波动性的存在降低了绩效度量的一致性和敏感性,但波动性对绩效度量的准确性的影响则呈非单调性变化.