高功率微波高斯馈源口面场分析

 用波导本征模展开方法对用于高功率微波发射系统的方角锥高斯馈源口面场进行分析，提出结合馈源远场辐射特性和避免高功率击穿折衷选定相应的高斯模注腰半径，进而确定多个波导模幅值，从而为运用模匹配或耦合波理论设计高斯馈源提供依据。     

Binary collision simulations of ion transmission through silicon single crystal films

Abstract

Computer simulation studies of the energy distribution of transmitted ions such as alpha-particles, He-, and B-ions through crystalline silicon, using the enhanced binary-collision cascade simulator MARLOWE, will be reviewed. The enhancement includes an additional electronic-energy loss (EEL) model which takes into account explicitly both the target electron density variation via the structure factors and the electron density of the projectile. Investigations of the stopping power for He ions and protons in silicon, at intermediate- and high-energies, based on the adapted EEL model and a velocity-dependent effective charge will be presented. The overall agreement between the calculated and experimentally determined stopping power data and the simulated and measured transmission spectra will be demonstrated. Effects of energy-loss straggling, core-electron contribution to the energy loss at high-energies and charge-state effects at low energies on the transmission spectra will also be discussed.     

独立双池受激布里渊散射系统中能量转换效率的研究

利用瞬态包含泵浦抽空的SBS理论模型对独立双池受激布里渊散射系统进行数值模拟，给出了能量转换效率随泵浦功率密度的变化规律。实验验证，理论值与实验结果相吻合。     

基于振荡序列的灰色GM(1,1|sin)幂模型及其应用

针对现实中普遍存在的振荡序列预测问题,传统灰色模型的预测效果并不理想。为此,在现有灰色GM(1,1|sin)模型基础上,提出了GM(1,1|sin)幂模型,给出了最小二乘准则下的参数计算公式;构建了以平均模拟相对误差最小化为目标的非线性优化模型,利用粒子群优化算法求得最优参数。最后,将新模型应用于城市交通流和高新技术产品出口额模拟预测,并将预测结果与传统GM(1,1)模型、GM(1,1)幂模型和GM(1,1|sin)模型进行了比较,结果表明,新模型具有更高的模拟精度,更适合对振荡序列的预测分析。     

An improved progressive preconditioning method for steady non‐cavitating and sheet‐cavitating flows

An improved progressive preconditioning method for analyzing steady inviscid and laminar flows around fully wetted and sheet‐cavitating hydrofoils is presented. The preconditioning matrix is adapted automatically from the pressure and/or velocity flow‐field by a power‐law relation. The cavitating calculations are based on a single fluid approach. In this approach, the liquid/vapour mixture is treated as a homogeneous fluid whose density is controlled by a barotropic state law. This physical model is integrated with a numerical resolution derived from the cell‐centered Jameson's finite volume algorithm. The stabilization is achieved via the second‐and fourth‐order artificial dissipation scheme. Explicit four‐step Runge–Kutta time integration is applied to achieve the steady‐state condition. Results presented in the paper focus on the pressure distribution on hydrofoils wall, velocity profiles, lift and drag forces, length of sheet cavitation, and effect of the power‐law preconditioning method on convergence speed. The results show satisfactory agreement with numerical and experimental works of others. The scheme has a progressive effect on the convergence speed. The results indicate that using the power‐law preconditioner improves the convergence rate, significantly. Copyright © 2010 John Wiley & Sons, Ltd.     

Krull property of generalized power series rings

Let D be an integral domain and let $(S,\le )$ be a torsion-free, ≤-cancellative, subtotally ordered monoid. We show that the generalized power series ring $?D^{S,\le }?$ is a Krull domain if and only if D is a Krull domain and S is a Krull monoid.     

脉冲电场测试中的激光供电技术

为解决脉冲电场测试系统中的供电问题，设计了一套激光光纤供电系统，该系统由激光器、多模光纤及光电池构成。重点研究了激光器与光纤的耦合问题，设计了透镜系统对激光器输出光束进行准直和压缩。通过MOCVD法研制了GaAs光电池，并制作了椭球形"光伏眼"来提高光电转换效率。仿真和实验表明:采用透镜耦合时，激光器与光纤的耦合效率可达80%以上，远远高于直接耦合时的16%，改进后的"光伏眼"耦合效率相比直接耦合时提高了54.5%，激光供电系统的转化效率在40%以上。该系统的研制为解决脉冲电场的供电问题提供了一种方案。     

Numerical analysis of nematic liquid crystal alignment on asymmetric surface grating structures

The influence of an asymmetric periodic grooved cell surface on the 2D static director configuration of a nematic liquid crystal has been investigated. The minimum in the Frank-Oseen free energy was solved numerically with the Rapini-Papoular form of the surface anchoring energy at the nematic-grating interface. Results are presented for the variation of pretilt angle in the tilted bulk director field as a function of the surface groove depth, pitch and asymmetry and the bulk parameters. The simulations demonstrate the existence of two energetically degenerate high and low pretilted bulk alignment configurations. The pretilt values in these two regimes and also for the low tilt regime with finite surface anchoring are consistent with experimental results. An effective increase in the resolution of the model is obtained by using an irregular grid to describe the surface profile.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。