Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

The metallic C6S monolayer with high specific capacity for K-ion batteries

K-ion batteries (KIBs) attract considerable attention due to the abundance of K, high-working voltages, and chemical similarity with Li, enabling the utilization of mature Li-ion technology. However, shortage of high-performance anode materials is a critical obstacle for the development of KIBs. Through first-principles swarm-intelligence structural search, we identify a potential anode material, the C₆S monolayer, which provides not only a remarkably high specific capacity of 1546 mAh/g but also a low diffusion barrier of 0.11 eV and a low open-circuit voltage of 0.21 V. Inherent metallicity originates from delocalized π electrons.     

Improved Dermal and Transdermal Delivery of Curcumin with SmartFilms and Nanocrystals

Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.     

A novel nanoscale fin field effect transistor by amended channel: Investigation and fundamental physics

The present paper proposes a new Fin Field Effect Transistor (FinFET) with an amended Channel (AC). The fin region consists of two sections; the lower part which has a rounded shape and the upper part of fin as conventional FinFETs, is cubic. The AC-FinFET devices are proven to have a lower threshold voltage roll-off, reduced DIBL, better subthreshold slope characteristics, and a better gate capacitance in comparison with the C-FinFET. Moreover, the simulation result with three-dimensional and two-carrier device simulator demonstrates an improved output characteristic of the proposed structure due to reduction of self-heating effect. Due to the rounded shape of the lower fin region and decreasing corner effects there, the heat can flow easily, and the device temperature will decrease. Also the gate control over the channel increases due to the narrow upper part of the fin. The paper, thus, attempts to show the advantages of higher performance AC-FinFET device over the conventional one, and its effect on the operation of nanoscale devices.     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.     

Dielectric properties of tetragonal tungsten bronze films deposited by RF magnetron sputtering

Tetragonal tungsten bronze (TTB) films have been synthesised on Pt(111)/TiO₂/SiO₂/Si substrates from Ba₂LnFeNb₄O₁₅ ceramics (Ln = La, Nd, Eu) by RF magnetron sputtering. X-ray diffraction measurements evidenced the multi-oriented nature of films with some degrees of preferential orientation along (111). The dependence of the dielectric properties on temperature and frequency has been investigated. The dielectric properties of the films are similar to those of the bulk, i.e., ε ∼150 and σ ∼10⁻⁶ Ω⁻¹ cm⁻¹ at 1 MHz and room temperature. The films exhibit two dielectric anomalies which are attributed to Maxwell Wagner polarization mechanism and relaxor behaviour. Both anomalies are sensitive to post-annealing under oxygen atmosphere and their activation energies are similar E_a ∼0.30 eV. They are explained in terms of electrically heterogeneous contributions in the films.