工作用玻璃液体温度计温度修正值的测量不确定度分析

依据JJF1059－1999，利用二等水银湿度计标准装置，分析了工作用玻璃液体温度计温度修正值的测量不确定度。当温度测量点为20℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.054℃，当温度测量点为95℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.055℃。     

Conformational studies of basic poly (α-amino acid)s in reversed micelles

The conformation of various basic poly (-amino acid)s was investigated by CD measurements in aqueous solutions containing bis (2-ethylhexyl)sodium sulfosuccinate (AOT) as well as in the AOT reversed micelles. The addition of AOT into an aqueous solution of poly(L-lysine) induces the conformational transition from coil to ordered structure, followed by aggregation. On the other hand, poly(L-lysine) assumes-structure in the reversed micelles at low w_ovalue (w_o=[H₂O]/[AOT]). Similarly to poly(L-lysine), poly(L-ornithine) takes an ordered structure in the aqueous solution containing AOT and-structure in the reversed micelles. In this case, however, these ordered structures are not so stable, compared with that of poly(L-lysine). Poly(L-arginine) undergoes the conformational transition from coil to helix by addition of AOT into the aqueous solution. Further addition of AOT allows transformation into-structure. Copoly(L-lysyl-L-leucine) with 63% leucine residue was shown to take a stable helical conformation even in pure water. In the reversed micelles, however, this ordered structure is significantly changed probably because the hydrophobic interaction among the leucyl residues is lowered in the reversed micelles.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

分块镜扇形子镜驱动点位置优化计算

在光学综合孔径共相位检测微调系统中,分块镜子镜三自由度微动调节机构通常采用3个并联的微位移致动器来驱动各子镜,使单个分块镜具有独立的姿态调整能力,从而实现了光学共相位误差的纳米级精确校正。以理论力学原理作为切入点展开了分析,针对微动机构的稳定性、tilt-tip调节灵敏度等,根据所给定几何参数的子镜三驱动点位置对其进行了优化计算。经数学建模和仿真计算,得到了定参数子镜的三驱动点最佳位置坐标,进而归纳出了普遍适用的优化评价方法。     

夫琅和费衍射与大角度衍射

众所周知,夫琅和费衍射的解析强度分布和暗纹位置是在一系列近似情况下导出的。其中最重要的条件是观测点必须限制在傍轴附近,衍射角不能太大,否则得不到简单的解析公式,也就不能称之为夫琅和费衍射。最近发现有人发明错误的理论将夫琅和费衍射概念及其测量扩展到90°角,其结论与常识截然相反,因此,有必要把混淆的概念予以澄清。     

基于联合变换相关器的像移测量仿真分析

对基于联合变换相关器的像移测量数学原理进行了说明,介绍了面阵CCD的安装位置以及输入图像的获取方法,分析了低信噪比输入图像、相对转动位移对测量精度的影响。应用MATLAB对输入图像进行傅里叶变换得到联合功率谱,对二值化处理的功率谱进行傅里叶变换得到相关输出,用质量中心算法计算出像移量。分析得出,输入图像信噪比大于5dB,测量均方误差小于0.05像素;输入图像相对转动位移在0.1°的范围内,转动位移对测量精度和峰噪比的影响可以忽略不计。综合分析表明像移测量均方误差小于0.05像素。     

基于数码相机的双向反射率分布函数测量方法

除传统领域外,双向反射率分布函数(BRDF)在计算机图形学、虚拟现实等方面具有广泛的应用,但缺乏价格适中的测量工具。试验了一种基于单个数码相机的BRDF测量方法。该法综合了摄影测量学、光学、计算机图形学等学科的知识,测量装置成本低廉、易于实现,并集成于专门编制的测量程序中。测量操作过程方便、易行,测量数据可直接以视化形式输出。给出了某种油漆的测量实例,初步验证了该方法的可行性。