A Repaid Procedure for Preparing Oxyen-18 Determination in Water Samples

An equipment for the speed δ¹⁸O analysis of water samples is described. It used the equilibrium isotopic exchange reaction between water and CO₂ gas. Outgasing of samples through capillary without freezing down the samples, together with shaking during the equilibrium time, reduced considerably time for sample preparation.

Apparatus is air termostated with hand valves. Measured δ values are not very sensitive to precision of preparation work and reaction conditions, except of temperature. With good temperature control the standard reproducibility of single measurement is better than 0,1‰     

Study of Ganga River – Groundwater Interaction Using Environmental Oxygen-18

The influent and effluent characteristics of river Ganga in the Hardwar-Narora sector in Uttar Pradesh, India was studied using environmental oxygen-18. δ¹⁸O of river water and also of groundwater close to the river course was monitored at 8 stations along the 220 km stretch for a period of ten months. δ¹⁸O of the river during the monsoon months (June to September) was about – 10 at all the stations. However, during the dry months from October to April, the δ¹⁸O of the river was enriched progressively from Hardwar to Narora. The enrichment indicated groundwater contribution to the river during the non-monsoon months. The contribution was comuted using the principle of isotope balance.     

Über den Einfluß von Isotopieeffekten auf die Verbreitung der Isotope in der Natur

Die Isotopenzusammensetzung der chemischen Elemente in ihren natürlichen Vorkommen wird von kernphysikalischen Vorgängen, vom Einfall extraterrestrischer Materie und, namentlich bei den leichten Elementen (etwa bis zum Chlor), von kinetischen und thermodynamischen Isotopieeffekten beeinfluβt. Deshalb ist die Kenntnis der in der Natur wirkenden Isotopieeffekte eine entscheidende Voraussetzung für das Verständnis der Gesetzmäβigkeiten der Verbreitung der Isotope in der Natur und für die Anwendung dieser Gesetzmäβigkeiten als Mittel der geo- und kosmoswissenschaftlichen Forschung und der Umweltforschung [1].     

Schnell-Methode zur Umsetzung von Kohlenwasserstoffen zu Wasserstoff für die Isotopenanalyse

Es wird eine weiterentwickeltes, isotopenanalytisches Verfahren zur probenchemischen Umsetzung von Kohlenwasserstoffen mit Chromium zu Wasserstoff bei 1300 K vorgestellt. Die erzielten Testergebnisse zeigen anhand der gemessenen δD-Werte, daβ Quarzöfen bei diesen Temperaturen noch keine die Isotopenmeβwerte beeinflussende Diffusion von Wasserstoff durch die Wandung zulassen. Auβerdem erfolgte die Reaktion nahezu spontan und vollständig, was die Methode zeitlich sehr effektiv macht.

A modified isotope analytical method is presented for the chemical reaction of hydrocarbons with chromium at 1300 K to form hydrogen. The test results obtained (i.e. the measured δD-values) show that at this temperature quartz heating tubes do not allow hydrogen to diffuse through the wail, which fact would influence the isotopic composition. Furthermore the reaction proceeds nearly spontaneously and quantitatively, which yields an effective method, especially with respect to time.     

REACTION OF LITHIUM DERIVATIVE OF DIETHYL PHENYLMETHANE-PHOSPHONATE WITH KETONES

Abstract

The reaction of the lithium derivative of diethyl ester of phenylmethanephosphonic acid (1-Li) with alkanones, cycloalkanones, alkylaryl and diarylketones 2s-b is studied at -70°C in THF. The corresponding adducts-diethyl esters of l-phenyl-2,2-dialkyl(phenyl)-2-hydroxyethanephosphonic acids 3s-h are isolated, their yields being usually higher at short reaction time. The olefination of 3-Li as well as of 3 (both by thermolysis or in acidic media) proceeds in low degree, while in the case of 3-Na the yields of alkenes 4 are good. The relative configurations of 3b. 31 and 3g are determined by IR and NMR-spectra, as well as by their stereospecific olefination. “Threo”-stereoselectivity of the addition stage of the reaction of 1-Li with 2b, 21 and 2g is observed, the “threo”/“erythro” ratio remaining independent on the reaction time.     

A new method for the determination of the 34S/32S ratio of water-soluble sulphur in soil

A new method for the determination of the ³⁴S/³²S ratio of water-extractable sulphate in soil is described. Soils are extracted directly with deionized water, which is evaporated down. The remaining residue is then rehydrated and transferred to tin cups containing an adsorbent and mixed with an oxygen donor (V₂O₅). Samples are then analysed using a continuous flow isotope ratio mass spectrometer. The new method requires around 10?g soil per determination, compared to much larger amounts (up to kilograms) of soil required for the previous methods. Sample preparation and subsequent analysis is quick and efficient. The method is demonstrated using a number of soils collected from around the world to provide a range of determined δ³⁴S values. The δ³⁴S values of water-extractable sulphur were broadly similar to those of the soil total sulphur.     

低频标准真空涨落的测量

采用自平衡零拍方案, 对低频段的标准量子真空涨落进行了测量. 实验确定了该系统的饱和光功率约为3.2 mW. 在10 Hz–400 kHz的频率范围内, 系统的共模抑制比平均为55 dB, 在100 Hz处高达63 dB, 对激光经典技术噪声具有很强的抑制作用. 当入射光功率为400 μ W 时, 真空涨落噪声达到11 dB. 此低频量子真空噪声探测系统可广泛应用于量子计量和量子光学等研究领域.     

Stochastic resonance in an asymmetric bistable system driven by coloured correlated multiplicative and additive noise

This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.     

A numerical investigation of the influence of the aspect ratio in three‐dimensional separated flows

The influence of aspect ratio in three‐dimensional, numerical experiments of separated flows is studied in the case of the backward‐facing step at Reynolds numbers 600, 800, and 950. The computational domain is designed as an actual laboratory experiment. The governing equations are the steady state, isothermal, and incompressible Navier–Stokes equations. The expansion ratio of the computational domain is 1:2. The aspect ratio varies from 1:10 to 1:40. The results of the computations focus on the spanwise variations of the length and the strength of the two eddies along the lower and upper wall. It is concluded that both numerical and laboratory experiments should be designed with an aspect ratio of at least 1:20, if only the accuracy of the position of the detachment and the re‐attachment points matters. If the accuracy of the shear‐stress distributions is also taken into account, then an aspect ratio of at least 1:30 should be chosen. Finally, if the magnitudes of the vortex centers are also considered, then only the aspect ratio of 1:40 qualifies for a realization of two‐dimensional flow conditions in the plane of symmetry. This is contrary to the common practice in the field, at least from the side of laboratory experiments, where an aspect ratio of 1:10 is still considered adequate for this purpose. Copyright © 2011 John Wiley & Sons, Ltd.     

SYNTHESIS AND PROPERTIES OF ANILING ANILING AND 0-AMINOBENZENESULFONIC ACID COPOLYMER*

Poly(aniline- co-o-aminobenzenesulfonic acid) (PAOABSA) as a water soluble conducting polymerwas synthesized by chemical polymerization. The productivity and the room-temperature conductivity of thecopolymer were measured as a function of the reaction conditions, such as reaction temperature, the ratio ofoxidant to monomer and the degree of sulfonation defined as the ratio of sulfur to nitrogen atoms(S/N). Themain results obtained are summarized as follows : (1) lower reaction temperature (at about 0℃) is favorablefor the enhancement of the room-temperature conductivity of the copolymer; (2) higher content of oxidant isunfavorable for increasing the room-temperature conductivity of the copolymer; (3) both productivity androom-temperature conductivity of the copolymer decrease with increase of the degree of sulfonation whichwas always lower than 0.5 even an excess of o-aminobenzenesulfonic acid was added, probably because thereactivity ratio of aniline (γ=2.99± 0.05) is much higher than that of o-aminobenzenesulfonic acid (γ_2 = 0.06±0.02) estimated by using Fineman-Ross method and least square method.