3-D-electron microscopy configuration of TMOS wet silica gels prepared by the quick-freeze,deep-etching-rotary-replication technique

Silica gel provides a useful medium for crystal growth; solution growth is confined to pores left free by the polymer during its development. All growth steps depend on the gel structure, which is not completely known for crystal growth conditions. Therefore, a three-dimensional (3-D) visualization has been performed for two TMOS aqueous gels, which are rather fragile: the quick-freeze, deep-etching, rotary-replication method has been applied for sample preparation. An original surface labeling technique has been used for surface recognition. The results concern the distribution of macropores that are responsible for crystal nucleation; micropores whose total volume is larger have not been visualized due to the limits of the method. These results are discussed in comparison with previous data performed by light scattering.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

用密度泛函理论研究Lennard-Jones 流体在狭缝中的相平衡

用改进的基础度量理论(modified fundamental measure theory, MFMT)和密度Taylor展开分别表达过剩自由能中的短程作用和色散作用. 流体分子与狭缝壁之间的相互作用以10-4-3势能函数表达. 由巨势最小原理确定Lennard-Jones (LJ)流体在狭缝中的密度分布和过剩吸附量, 所得结果与分子模拟数据吻合良好. 根据平衡时两相温度, 化学势及巨势相等, 计算了LJ流体在狭缝中的相平衡.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

乙醇 /水混合溶剂沉淀制备纳米BaF2及粒径控制

采用水和乙醇混合溶剂沉淀的方法制备了不同粒径的BaF₂纳米粉体。用XRD、TEM和FSEM表征了粉体的粒径和形貌。研究了陈化时间、水和乙醇的体积比对BaF₂纳米粉体的粒径和形貌的影响。结果表明，随混合溶剂中乙醇含量升高，沉淀粒径减小。BaF₂沉淀粒径的倒数和溶剂介电常数的倒数呈线性关系，据此关系可以控制BaF₂纳米粉体的粒径。     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

Sodium hexadecanoate micellar aggregation number

The diffusion coefficient of sodium hexadecanoate micelles was studied by polarography at 63°C, and the size and aggregation number of the micelles was computed. At concentrations above 0.01 mol·L^–1 rodlike micelles exist, which become flexible at 0.040 mol·L^–1 and entangle at 0.043 mol·L^–1     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.