SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

Two new bounds on the size of binary codes with a minimum distance of three

We prove two new upper bounds on the size of binary codes with a minimum distance of three, namelyA(10, 3)76 andA(11, 3)152.     

煤的孔结构特征对水煤浆性质的影响

本文选用１７种不同变质程度的中国煤，详细研究了煤孔结构特征对煤浆性质的影响。发现煤孔体积通过影响煤在分散体系中的吸水性，从而影响煤之成浆性。但由于不同变质程度煤表面亲水性的显著差异，煤孔体积在影响煤成浆性的能力方面差别很大，这使得煤吸水性和浆体最高煤浓度与煤孔体积并不存在直接的相关性，而是取决于煤孔体积Ｖ和以煤－水接触角（θ）的余弦值表示的煤表面亲水性因子的乘积，即煤之有效孔体积：Ｖ×ｃｏｓ（θ／     

Mechanism of lamellar spacing adjustment in directionally frozen agar gels

A theory is presented for predicting the size of ice crystals which result from steady-state, unidirectional growth within aqueous agar gels. Cellular arrays of adjacent ice crystals were separated by an amorphous water-agar membrane at a composition near the vitrification point. Using this vitrification composition and both a steady-state condition and a minimum free energy criterion, the size of ice crystals was predicted for a given solidification velocity and diffusion condition. It was found, however, that this simple model could not predict the trend towards larger crystal sizes that was observed when the initial agar concentration in the gels increased from 3% to 10% by weight agar.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Finite-size scaling and the renormalization group

Renormalization group calculations ind = 4 andd = 4 – are performed for a system of finite size. A form of mean-field theory is used which yields a rounded transition for a finite system, and this allows a sensible expansion in fluctuations. A combination of Ewald and Poisson sum techniques is used to produce explicit numerical results for the specific heat ind = 4 which, with the setting of two nonuniversal metrical factors and the fourth-order coupling constant may be compared with simulations. The numerical visibility of logarithmic corrections is investigated. The universal scaling function for the specific heat to relativeO() is also evaluated numerically.     

Surface tension and universality in the three-dimensional Ising model

The amplitude ₀ of the interfacial free energy per unit area (or surface tension) of the body-centered-cubic Ising model is found using a direct monte carlo simulation technique. The combination ²/k_BT_c, where is the correlation length, is shown to agree within the precision of the simulations with a previously reported estimate for the simple cubic lattice. Evidence is also presented for the universality of the finite-size scaling amplitude for the surface tension.     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

三氧化铬超微粒的制备与表征

我们曾首次报道了Fe_2O_3超微粒溶胶具有大的三阶光学非线性响应,其X~((3))值与商品用的掺杂CdS_(1-x)Se玻璃相近,并对其产生机制进行了初步研究.本文用微乳液法制备了经十二烷基苯磺酸钠(DBS)和硬脂酸(ST)表面修饰的Cr_2O_3超微粒,并用TEM、IR、XPS及紫外可见吸收光谱进行了表征.